Perform this task to protect hosts in CVM from potential attacks.
You can configure, upload, and install anti-virus packages for the hosts. The uploaded anti-virus package must be a .tar.gz file, and the file must be an installation program after decompression.
Do not close the window or browser during the uploading process.
If you select QI-ANXIN as the anti-virus software manufacturer, configure port policies to permit the ports used by the QI-ANXIN service.
The QI-ANXIN Legendsec Unified Server Security Management System supports only IPv4 Syslog servers.
On the top navigation bar, click Services.
From the left navigation pane, select Security > Anti-Virus.
If you select AsiaInfo as the anti-virus software manufacturer, perform the following tasks:
Select a host type, and enter the directory for saving the anti-virus package.
Click any area of the dotted area to select an anti-virus package.
Click Start to upload the anti-virus package.
After the anti-virus package is successfully uploaded, the system automatically installs the anti-virus package for CVK hosts.
Click Check to check the installation state of the anti-virus package on each host.
To manually install the anti-virus package for a host, click Install in the Actions column for the host or click Install next to the OK button.
If you select QI-ANXIN as the anti-virus software manufacturer, perform the following tasks:
Configure the basic parameters and Syslog alarm settings as described in "Parameters."
Click OK.
Vendor: Select an anti-virus software manufacturer. The current software version supports only AsiaInfo.
Vendor: Select an anti-virus software manufacturer.
CVK Type: Select an option from ARM_CentOS, x86_CentOS, and x86_Ubuntu.
Directory: Enter the directory for saving the anti-virus package.
Current Package: Name of the most recently uploaded anti-virus package.
Name: Name of the host.
State: State of the host.
CPU Architecture: Select an option from x86 and ARM.
OS: Select an operating system type.
IP: IP address of the host.
Package State: Whether the host is installed with the anti-virus package.
Progress: Check operation state.
Action: Actions that operators can perform on the host.
To install the anti-virus patch for the host, click Install.
To uninstall the anti-virus patch for the host, click Uninstall.
Protocol: Protocol used to access the QI-ANXIN Legendsec Unified Server Security Management System. Only HTTPS is available.
Port Number: Enter the port number of the QI-ANXIN Legendsec Unified Server Security Management System.
IP Address: Enter the IP address of the QI-ANXIN Legendsec Unified Server Security Management System.
Username: Enter the username for accessing the QI-ANXIN Legendsec Unified Server Security Management System.
Password: Enter the password for accessing the QI-ANXIN Legendsec Unified Server Security Management System.
Protocol: Protocol used to send Syslog data. Only UDP is available.