Configuring the external network interface

1. Click the Edit icon for GE1/0/1, and then configure the interface as follows:

   • Select Layer 3 mode as the link mode.

   • Add the interface to security zone wan.

   • Select the IPv4 address configuration method according to the service provider. Manual assignment is selected in this example.

     • If you select PPPoE, enter the PPPoE account and password provided by the service provider.

     • If you select DHCP, the DHCP server automatically assigns the public IP addresses for accessing the WAN.

     • If you select Manual assignment, enter the IP address, subnet mask, and gateway address of the WAN.

   • Click OK.

   Figure-1 Editing interface GE1/0/1