Server load balancing session information

This help contains the following topics:

Introduction

Table-1 shows TCP connection information for Layer 7 server load balancing. You can click the icon on top of the list to select items to be displayed.

Table-1 LB session information

Item

Description

Client-side client IP

Client-side client IP address used to establish TCP connections to the device.

Client-side client port

Client-side client port number used to establish TCP connections to the device.

Client-side server IP

Client-side server IP address used to establish TCP connections to the device.

Client-side server port

Client-side server port number used to establish TCP connections to the device.

Server-side client IP

Server-side client IP address used to establish TCP connections to the server.

Server-side client port

Server-side client port number used to establish TCP connections to the server.

Sever-side server IP

Server-side server IP address used to establish TCP connections to the server.

Sever-side server port

Server-side server port number used to establish TCP connections to the server.

Client-side connection state

State of a TCP connection between the client and the device:

  • CLOSED

  • LISTENING

  • SYN_SENT

  • SYN_RECEIVED

  • ESTABLISHED

  • CLOSE_WAIT

  • FIN_WAIT_1

  • CLOSING

  • LAST_ACK

  • FIN_WAIT_2

  • TIME_WAIT

Server-side connection state

State of a TCP connection between the device and the server:

  • CLOSED

  • LISTENING

  • SYN_SENT

  • SYN_RECEIVED

  • ESTABLISHED

  • CLOSE_WAIT

  • FIN_WAIT_1

  • CLOSING

  • LAST_ACK

  • FIN_WAIT_2

  • TIME_WAIT

Client-side VRF

VRF to which the client-side TCP connection belongs.

Server-side VRF

VRF to which the server-side TCP connection belongs.

Creation time

Time when the device started to establish the TCP connection.

Idle Time

Duration of the TCP connection being idle.

Idle TimeOut

Timeout time for the TCP connection being idle.

vSystem support information

Support of non-default vSystems for this feature depends on the device model. This feature is available on the Web interface only if it is supported.