Perform this task to enable or disable the container engine service, and specify a container server IP address. ARM hosts do not support the container engine service.
With RBAC enabled, only system administrators can edit container settings. Security auditors can review container settings.
On the top navigation bar, click System.
From the left navigation pane, select Parameters.
Click the Container Settings tab.
Click Edit and then edit the parameters as needed.
Click Save.
Container Settings: Enable or disable the container engine service. If you enable the container engine service, you must also specify a container server IP.
Container Server IP: Specify an IP address of the server or VM where the container engine image is deployed.