Third-Party system collaboration

Advanced parameter configuration includes the following topics:

vGPU parameters—Configure the IP address and port number of License server that authorizes vGPU resources. The ARM architecture does not support vGPU in the current software version.
DNS server parameters—Configure DNS server addresses. Up to three DNS server addresses are supported. The DNS server parameters take effect only on the management node. In the stateful failover environment, the DNS server parameters take effect on both the primary and backup management nodes.
Samba server parameters—Configure a Samba server for file sharing. If Samba sharing is enabled for a user, its cloud desktop will automatically mount a Samba shared path upon connection. The user can visit only its own Samba shared path. When the cloud desktop is disconnected, the Samba shared path is unmounted automatically. Both Windows desktops and virtual applications can access the Samba file sharing service.
VNC proxy server parameters—Configure VNC proxy server parameters.
Virtual Network Computing (VNC) enables you to remotely control another computer. It transmits the remote computer screen to the local computer over the network. VNC contains VNC clients and VNC servers. The VM consoles in Workspace are VNC clients and VMs on the hosts are VNC servers. Operators might access the VMs within the data center from an external network. To ensure data security, you must specify a VNC proxy server for the VMs. The VNC proxy server is the only node that the data center exposes to external networks. The external network can communicate with VMs within the data center only through the VNC proxy server.
Syslog server—Configure syslog server parameters for the system to send operation log to a syslog server.
Monitor platform parameters—Configure the Report Data to Monitor Platform, Monitor Platform Address and Report Interval parameters as described in "Monitor platform parameters."
Location Parameter—Configure the Segment ID, Regional Identification and DNS IP.

Restrictions and guidelines

For a user to create user-defined directories on a Samba shared server, make sure the default homes field is reserved in the smb.conf file of the Samba shared server.

Procedure

From the left navigation pane, select System > External Services.
Click the Third-Party System Collaboration tab.
Click the icon next to vGPU Parameters, configure the parameters as described in "vGPU parameters," and click Save. The ARM architecture does not support vGPU in the current software version.
Click the icon next to DNS Proxy Parameters, configure the parameters as described in "DNS proxy parameters," and click Save.
Click the icon next to Samba Shared Server Parameters, configure the parameters as described in "Samba server parameters," and click Save.
Click the icon next to VNC Proxy Parameters, configure the parameters as described in "VNC proxy server parameters," and click Save.
Click the icon next to Syslog Server, configure the parameters as described in "Syslog server," and then click Save.
Click the icon next to Monitor Platform Parameters, configure the parameters as described in "Monitor platform parameters," and then click Save.
Click the icon next to Location Parameter, configure the parameters as described in "Location parameters," and then click Save.

Parameters

vGPU parameters

The ARM architecture does not support vGPU in the current software version.

Primary License Server: Specify the IP address of the primary license server. You can set this parameter to configure or edit the license server for vGPUs no matter whether you have specified the IP address of the license server when you install and deploy vGPUs.
Primary Port: Specify the port number of the primary license server. The default is 7070. vGPUs will use this port number to obtain licenses from the primary license server.
Secondary License Server: Specify the IP address of the secondary license server.
Secondary Port: Specify the port number of the secondary license server. The default is 7070. vGPUs will use this port number to obtain licenses from the secondary license server.

DNS proxy parameters

DNS Server: Configure DNS server addresses. Up to three DNS server addresses are supported. Separate multiple DNS server addresses by colons (;), for example, 7.7.7.7;8.8.8.8;9.9.9.9. The DNS server parameters take effect only on the management node. In the stateful failover environment, the DNS server parameters take effect on both the primary and backup management nodes.

Samba server parameters

Samba Server Address: Enter the IP address of a Samba server.
Username: Enter the username used to access the Samba server.
Password: Enter the password of the username.

VNC proxy server parameters

Server IP: Enter the IP address of the VNC proxy server.
Login Password: Enter the password for the user to access the VNC proxy server.
Login Name: Enter the username used to access the VNC proxy server.
VNC Gateway Proxy: Select a VNC gateway to perform remote assistance for IDV, or VOI/TCI endpoints. As a best practice, select a gateway with the Public VNC Port parameter configured.

Syslog server

Syslog Server IP: Enter IP addresses of the syslog server. If you enter multiple IP addresses, separate the IP addresses by semicolons (;), for example, 192.168.0.27;192.168.0.28 or FC00::1;FC00::2.
Protocol: Select a protocol for sending syslog messages. The protocol can be UDP and TCP. The default protocol is TCP.
Syslog Port: Enter a syslog server port number.

Monitor platform parameters

Report Data to Monitor Platform: Select whether to report the data to the monitor platform. This feature is enabled by default.
Monitor Platform Address: Specify the address of the monitor platform that presents relevant data information under the office scenario and the education scenario, respectively. After deploying the monitor platform, you must configure the address as https://ip-address:18443. The ip-address value is the IP address of the server where the monitor platform resides.
Report Interval: Set the interval at which the system uploads and updates the data to the monitor platform.

Location parameters

Segment ID: Enter the segment ID of the vRouter.
Regional Identification: Enter the regional identification, which is the prefix for the vRouter name.
DNS IP: The value is fixed at 211.136.17.107;211.136.20.203.