Perform this task to enable Firewall Resource Pool Selection and Lowest Priority for Firewall Rules.
With Firewall Resource Pool Selection enabled, you can specify a resource pool when creating a firewall.
With Lowest Priority for Firewall Rules enabled, the system assigns a priority to a firewall rule as follows:
A newly added rule has a lower priority than existing rules.
In a bulk import file, a rule has a lower priority than the rules listed above it. If you click Import to import a single rule in the Bulk Import window, the newly added rule has a lower priority than existing rules.
On the top navigation bar, click Cloud Services, and then select Firewalls Service from the Network menu.
From the left navigation pane, select Advanced Settings > Firewall Settings.
Click the toggle button on the right side of Firewall Resource Pool Selection to enable or disable firewall resource pool selection.
Click the toggle button on the right side of Lowest Priority for Firewall Rules to enable or disable lowest priority for firewall rules.
You can view firewall flavors on this page. Options include:
Common—The firewall cannot apply IPS policies or anti-virus policies.
IPS—The firewall can apply only IPS policies.
Anti-Virus—The firewall can apply only anti-virus policies.
Professional—The firewall can apply IPS policies and anti-virus policies.
To view firewall flavors:
On the top navigation bar, click Cloud Services, and then select Firewalls Service from the Network menu.
From the left navigation pane, select Advanced Settings > Flavor Settings.