Configure data reporting settings for resources managed by Space Center. You can enable data reporting to the monitor platform, configure the monitor platform address and report interval, and edit the monitor platform address for Space Center.
From the left navigation pane, select System Settings > Monitor Platform Configuration. The Monitor Platform Configuration page opens. This page displays the monitor platform list of Space Console resources incorporated by Space Center.
Perform the following tasks as needed:
To edit parameters for a monitor platform, select a resource incorporated by the organization, click Edit in the Actions column for the resource to be edited. In the dialog box that opens, configure the monitor platform parameters, and then click OK.
To bulk edit parameters for monitor platforms, select one or multiple resources incorporated by the organization, click Edit Platform Parameters on top of the list. In the dialog box that opens, bulk configure the monitor platform parameters, and then click OK.
Report Data to Monitor Platform: Select whether to report the data to the monitor platform. This feature is enabled by default.
Monitor Platform Address: Specify the address of the monitor platform that presents relevant data information under the office scenario and the education scenario, respectively. After deploying the monitor platform, you must configure the address as http://ip-address:18443. The ip-address value is the IP address of the server where the monitor platform resides. For more information about the monitor platform deployment, see H3C Workspace Cloud Desktop Monitor Platform Installation & Deployment Guide.
Report Interval: Specify the interval at which the system sends data to the monitor platform.
Perform this task to configure the monitor platform address for Space Center as the monitor platform address of the incorporated resource (an IP address or a domain name) or the default monitor platform address (wdc.h3c.com). To facilitate unified monitoring of all incorporated resource data, you can configure monitor platform addresses of all resources as the same address.
To configure the monitor platform address:
From the left navigation pane, select System Settings > Monitor Platform Configuration.
Click Edit Platform Address. In the dialog box that opens, configure the monitor platform address, and then click OK.