Manage local users

All organization members will be displayed in the local user list, and you can perform centralized management on all local users.

You can perform the following tasks:

Create a user

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click Add User.

  1. Configure the user parameters.

  1. Click OK.

Bulk import users

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click Import.

  1. Select a user information file equivalent to or smaller than 5 MB.

The selected user information file must meet the user information template requirements. To download the template, click Download User Info Template.

  1. Click OK.

Edit a user

·          You can edit only the basic information about a user through this task.

·          The organization of a user cannot be edited.

·          To edit the user role, see "Edit the role of a user."

 

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click Edit for a user.

  1. Edit the basic information about the user.

  1. Click OK.

Disable a user

Disabled users cannot log in to the system.

To disable a user:

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click Disable for a user.

  1. In the dialog box that opens, click OK.

Enable a user

To allow a user to log in to the system, enable the user.

To enable a user:

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click Enable for a user.

  1. In the dialog box that opens, click OK.

Permit FEITIAN, AISEC, or third-party 2FA authentication

If FEITIAN, AISEC, or third-party 2FA authentication (see Configure two-factor authentication) is enabled in the system, perform this task to specify users who need to perform the authentication.

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Select the target users.

  1. Click Permit FEITIAN Authentication, AISEC Authentication, or Third-Party 2FA.

  1. In the dialog box that opens, click OK.

Deny FEITIAN, AISEC, or third-party 2FA authentication

You can perform this task to disable FEITIAN, AISEC, or third-party 2FA authentication for users. With the feature disabled, the users do not need to perform the two-factor authentication in login.

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Select the target users.

  1. Click Deny FEITIAN Authentication, AISEC Authentication, or Third-Party 2FA.

  1. In the dialog box that opens, click OK.

Change the password of a user

You can change the password for a user only when the user is disabled. The new password must be different from the original password.

To change the password of a user:

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click More for a user, and then select Edit Password.

  1. Configure a new password and enter it again.

  1. Click OK.

Edit the role of a user

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click More for a user, and then select Edit Role.

  1. Select a role for the user.

  1. Click OK.

Manage organizations of a user

A user can be assigned to multiple organizations with different roles as needed. The resource quotas of the user are created, counted, and displayed based on the organization it is assigned to.

·          No limit is set on the maximum number of organizations a user can be assigned to. For easy management and maintenance, assign a user to no more than ten organizations.

·          System users who belong to the root organization cannot be assigned to other organizations.

·          Only system administrators can edit the organization information of local users.

 

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click More for a user, and then select Organization Management. On the page that opens, perform organization management.

Table-1 Organization management parameters

Parameter

Description

Username

Username of the user.

Organization list

Display the organizations the user is assigned to and corresponding roles. The organization marked with the Organization label is the default organization the user is assigned to. Only the default organization can delete the user.

 

Table-2 Assigning a user to a new organization

Parameter

Description

Assign to Organization

Select the target organization.

Role

Assign a role for the user in the selected organization.

 

  1. Click Close.

Change organization

If a user is assigned to multiple organizations, the user can log in to the system as the user of only an organization.

To change the organization of the user:

  1. Log in to the system with the user's username and password in an organization.

  1. Click the username on the top right of the page.

  1. Click Change Organization, and then select the target organization.

Delete a user

The current login user cannot be deleted.

Before deletion, make sure the resources of the user are destroyed.

 

  1. On the top navigation bar, click System.

  1. From the left navigation pane, select Access Control > User > Local User.

  1. Click More for a user, and then select Delete.

  1. In the dialog box that opens, click OK.