View detailed information about a node

Perform this task to obtain information about a controller or worker node, its resource usage, pods, and events.

Open the container cluster page, as described in "View detailed information about a container cluster."

Parameter			Description
Basic Info	State		Operating state of the node.
	Node Type		Controller node or worker node.
	Started At		Date and time when the node started up.
	Labels		Labels assigned to the nodes for categorization purposes.
Resource Usage			Total CPU and memory capacity and their usage.
Network Traffic Monitor		Network Flow (Tx)	The rate (in Mbps) at which the node transmits messages.
		Network Flow (Rx)	The rate (in Mbps) at which the node receives messages.
Disk Read/Write Rate		Disk Write Rate	Disk write rate on the node.
		Disk Read Rate	Disk read rate on the node.
Disk Partition			Size of each disk partition on the node and its used capacity.
Pods			Displays information about each pod on the node. To open the remote configuration shell or log of a pod, click Remote or Log, respectively. To move a pod on a heavily loaded node to a lightly loaded node, click Drain for that node. The pod will stay on the node if the cluster does not have a suitable node.
Events			Displays alarm events on the node, including their severity, event description, and type. To delete an event, click Delete in the Actions column for that event.