Make sure GPU or vGPU resources exist. For more information about adding GPU or vGPU resources, see "Manage GPU devices."
From the left navigation pane, select Data Center > Virtualization.
Click the iRS tab.
Click Add iRS Service.
Configure the basic parameters, and then click Next.
Select resources, and then click Next.
Click Add.
Select VMs and configure the parameters, and then click OK.
Click Next.
Confirm the configuration, and then click OK.
Cluster: Enter the name of the cluster that runs the iRS service.
Resource Type: Select a resource type. The system supports only GPU and vGPU.
UUID: UUID of the vGPU. This parameter is available only for vGPUs.
Max Monitors: Specify the maximum number of monitors supported by the vGPU. This parameter is available only for vGPUs.
Buffer: Specify the frame cache size of the vGPU. This parameter is available only for vGPUs.
Resolution: Specify the maximum resolution supported by the vGPU. This parameter is available only for vGPUs.