Use one of the following methods to add local user groups:
Create a local user group—Applicable to scenarios where only a local user group or a few number of local user groups will be added.
Import local user groups—Applicable to scenarios where a large number of local user groups will be added.
From the left navigation pane, select Users > Local Users.
On the User Groups tab of the Overview page, click Create.
In the dialog box that opens, configure user group parameters.
Click OK.
Parent Group: Parent group of the local user group. If the parent group is the root group, the value for this field is a slash (/).
Group Name: Name of the local user group.
Access Policy: Select an access policy to limit user access to cloud desktops or course desktops by time and IP address.
Class Or Not: Select whether the local user group is a class. If the group is a class, you must select a grade level for the class. This parameter is available only in an education scenario or in an office-education hybrid scenario.
Grade Level: Grade level of the class. You can create a grade level in the Manage Grade Levels dialog box. This parameter is available only in an education scenario or in an office-education hybrid scenario.
In the current software version, ARM hosts do not support grade level management.
From the left navigation pane, select Users > Local Users.
Click Manage Grade Levels in the upper-right corner of the page.
Click Create.
In the dialog box that opens, configure the grade level name and the lower-level grade.
Click OK.
The new grade level is displayed in the Manage Grade Levels dialog box, and you can delete an existing grade level.
Grade Level Name: Name of the grade level. The value can contain only letters, Chinese characters, digits, underscores (_), and hyphens (-), and it cannot contain an at sign (@) or pound sign (#).
Lower-Level Grade: Grade level lower than the current grade level. The lower-level grade can be upgraded to the current grade level.
From the left navigation pane, select Users > Local Users.
On the User Groups tab of the Overview page, click More, and then click Import.
Click Download Template and add local user group information to the downloaded template file.
Upload the file back to the Space Console and configure other import parameters.
Click Next.
Verify that the configuration is correct.
Click OK.
Import File: Upload the file that contains user group information. The encoding format of the uploaded file must be GBK.
Delimiter: By default, the delimiter is a comma (,). The delimiter is not user configurable.