Perform this task to change the password of the user account connected to CVM for a host.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name > Host Name or Compute > Host Pool Name > Host Name.
Click More, and then select Edit Host.
Enter a password and confirm the password.
Click OK.
Host Name: Name of the host.
Username: Username used by the system to access the host through SSH. This parameter is not editable.
If root SSH is enabled, only user root is supported.
If root SSH is not enabled, only user sysadmin is supported.
Password: Enter a password for the root or sysadmin user.