Create vSwitch vs_gateway with DPDK enabled

  1. On the top navigation bar, click Network.

  1. From the left navigation pane, select Advanced Network Management.

  1. Click Create Network Bridge vs_gateway.

  1. Click Add.

Figure-1 vSwitches

 

  1. Set the vSwitch name to vs_gateway, select Service as the network type, enable DPDK in the advanced settings, and then click Next.

Figure-2 Adding vSwitch

 

  1. Click Select Host to select the hosts enabled with DPDK, select physical interfaces that use the VFIO driver, and then click Finish.