Upload a UIS-Sec management component package

Before deploying UIS-Sec, you must upload the UIS-Sec management component package to the component repository. The UIS-Sec management component VM provides the UIS-Sec portal of UIS Manager Standard Edition. UIS-Sec component VMs and value-added NFV security component VMs can be deployed only after the UIS-Sec management component VM is deployed.

Restrictions and guidelines

To obtain the UIS-Sec management component package, contact the franchiser.

Procedure

1. On the top navigation bar, click Network.

2. From the left navigation pane, select Advanced Network Management.

3. Click Upload UIS-Sec Management Component Package.

4. Click Upload.

5. Click in the dotted box to select the component package file.

6. Click Start.

Figure-1 Uploading component