This section describes how to manage and use application control gateway (ACG) resources on the VDC topology. You can perform the following tasks:
View detailed information about an ACG resource.
Log in to an ACG resource.
Delete an ACG resource.
Restart an ACG resource.
Shut down an ACG resource.
Monitor an ACG resource.
Edit service networks associated with an ACG resource.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource to view detailed information about the ACG resource. For more information, see "Parameters."
UUID: UUID of an ACG resource.
State: State of the ACG resource. Values are Running and Shut Down.
Name: Name of the ACG resource.
Deployment State: Deployment state of the ACG resource. Values are Succeeded and Failed.
Image: Name of the image required for deploying the ACG resource.
IP: IP address of the ACG resource.
DPDK State: Whether DPDK is enabled on the ACG resource.
Network Settings: Management network and service network settings of the ACG resource. Hover the mouse over the area to view detailed information.
Routes: Static routes configured for the ACG resource.
Organization: Organization of the ACG resource.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource.
Click Login.
On the page that opens, log in to the ACG resource and configure it.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource.
Click Delete.
Click OK.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource.
Click Restart.
Click OK.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource.
Click More, and then select Shut Down.
Click OK.
Perform this task to open the Resource Monitoring page of an ACG resource.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource.
Click More, and then select Resource Monitoring.
View the parameters.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource.
Click More, and then select Edit Networks.
Edit the service networks associated with the ACG resource.
Perform this task to start an ACG resource that is not running.
On UIS Cloud, click Cloud Services on the top navigation bar. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.
From the left navigation pane, click VDC.
Click the icon of an ACG resource.
Click More, and then select Start.