Configure a border gateway for a router

Make sure available IP address pools exist before performing this task. To create IP address pools, access the Cloud Services > Network & Security > Public IP Pools page.

 

  1. On UIS Cloud, click Cloud Services on the top navigation bar.

  1. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.

  1. From the left navigation pane, select Network & Security > Routers.

  1. Click the  icon in the Actions column for a router, and then select Configure Border Gateway.

  1. Select whether to enable SNAT.

  1. SNAT translates the source addresses in packets to the external network to the IP address of the border gateway.

  1. Click the  icon in the Actions column for a public IP address pool.