Perform this task to display information about VMs in a host pool.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name.
Click the VMs tab.
To display or hide the fields or adjust the sequence of the fields, click Customize Columns.
Alias: Alias of the VM.
Description: VM description.
Host: Name of the host to which the VM belongs.
State: Current state of the VM.
CPUs: Total CPU cores of the VM.
Memory Size: Memory size of the VM.
CPU Usage: Real-time CPU usage.
Memory Usage: Real-time memory usage.
Operating System: Operating system of the VM. Only Windows and Linux operating systems are supported in the current software version. ARM hosts support only NeoKylin, Kylin, UOS and Linux operating systems.
Name: Name of the VM.
IPv4/IPv6 Attributes: IPv4/IPv6 attributes of the VM’s NIC.
To view detailed IPv4/IPv6 attribute information, click the IP address in the IPv4/IPv6 Attributes column. For IPv4 attributes, if the VM is not installed with CAStools, the subnet mask cannot be obtained.
CAStools Version: CAStools version. This field is available only for VMs installed with CAStools.
CAStools State: CAStools state. This field displays Running if the VM is installed with CAStools and the CAStools is in running state. This field displays Not Running if the VM is not installed with CAStools. This field displays -- if the VM is shut down.
Running Duration: Uptime of the VM.
Created At: Time when the VM was created.
Last Shutdown Time: Time when the VM was last shut down.
Time Synchronization: Whether time synchronization is configured for the VM.
Disk Capacity: Disk capacity of the VM.
Available Capacity: Available disk capacity of the VM.
Used Capacity: Used disk capacity of the VM.
Anti-Virus: Anti-virus service state of the VM. ARM hosts do not support the anti-virus service.