Create a subnet

Subnets in the same network cannot have overlapping CIDRs. Subnets in different networks can overlap.

 

  1. On UIS Cloud, click Cloud Services on the top navigation bar.

  1. On the UIS-Sec portal of UIS Manager Standard Edition, click Network Services on the top navigation bar.

  1. From the left navigation pane, select Network & Security > Networks.

  1. Click the name of a network.

  1. Click the Subnets tab.

  1. Click Create Subnet.

  1. Configure subnet parameters as needed.

Table-1 Configuring subnet parameters

Parameter

Description

Subnet Address

Enter or select a network address. Only networks and subnets assigned to the organization are available.

Gateway Address

Enter a gateway address for the subnet. If you do not specify a gateway address, the system automatically assigns one, which is the first IP address in the network.

Available Addresses

Specify the available IP address ranges in the subnet.

DNS

Enter the IP address of the DNS server.

Additional Routes

Configure static routes for cloud hosts in the subnet.

 

  1. Click Create.