Configure the anti-virus service

You can configure, upload, and install anti-virus packages. The uploaded anti-virus package must be a .tar.gz file, and the file must be an installation program after decompression. Hosts will automatically install the uploaded anti-virus package.

By default, the anti-virus service is disabled on a VM. You can enable the anti-virus service for VMs one by one or batch enable the anti-virus service for multiple VMs.

Before enabling the anti-virus service for a VM, shut down the VM. The anti-virus service takes effect after the VM starts again.

Restrictions and guidelines

Do not close the window or browser during the uploading process.

Procedure

1. On the top navigation bar, click System, and then select Security Management > Anti-Virus from the navigation pane.

2. Select a vendor and enter the directory for saving the anti-virus package.

3. Click any area of the dotted area to select an anti-virus package.

4. Click Start to upload the anti-virus package.

After the anti-virus package is successfully uploaded, the system automatically installs the anti-virus package for hosts.

5. Click Check to check the installation state of the anti-virus package on each host.

6. To manually install the anti-virus package for a host, click the  icon in the Actions column of the host or click Install.

Parameters

• Vendor: Select an anti-virus software vendor. Options include None, AsiaInfo, and 360. The anti-virus software vendor cannot be changed if VMs enabled with the anti-virus service or abnormal hosts exist in the system.

• Directory: Enter the directory for saving the anti-virus package.

• Current Package: Name of the most recently uploaded anti-virus package.