33-Appendix
Chapters Download (336.57 KB)
The command index includes all the commands in the H3C S3600 Series EPON OLT Switches Command Manual-Release 3103, which are arranged alphabetically.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
|
|
|
|
|
access-limit |
24-AAA Commands |
1-1 |
|
access-limit enable |
24-AAA Commands |
1-1 |
|
accounting |
23-QoS Commands |
2-7 |
|
accounting default |
24-AAA Commands |
1-2 |
|
accounting lan-access |
24-AAA Commands |
1-3 |
|
accounting login |
24-AAA Commands |
1-4 |
|
accounting optional |
24-AAA Commands |
1-5 |
|
accounting-on enable |
24-AAA Commands |
2-1 |
|
accounting-on enable interval |
24-AAA Commands |
2-2 |
|
accounting-on enable send |
24-AAA Commands |
2-2 |
|
acl |
02-Login Commands |
2-1 |
|
acl |
22-ACL Commands |
1-4 |
|
acl copy |
22-ACL Commands |
1-6 |
|
acl ipv6 |
22-ACL Commands |
1-18 |
|
acl ipv6 copy |
22-ACL Commands |
1-20 |
|
acl ipv6 name |
22-ACL Commands |
1-21 |
|
acl name |
22-ACL Commands |
1-7 |
|
active region-configuration |
15-MSTP Commands |
1-1 |
|
alarm bit-error-rate |
10-Extended OAM Commands |
2-1 |
|
alarm bit-error-rate enable |
10-Extended OAM Commands |
2-2 |
|
alarm device-fatal-error |
10-Extended OAM Commands |
2-2 |
|
alarm frame-error-rate |
10-Extended OAM Commands |
2-3 |
|
alarm frame-error-rate enable |
10-Extended OAM Commands |
2-4 |
|
alarm llid-mismatch enable |
10-Extended OAM Commands |
2-4 |
|
alarm llid-mismatch threshold |
10-Extended OAM Commands |
2-5 |
|
alarm local-stable |
10-Extended OAM Commands |
2-6 |
|
alarm oam critical-event |
10-Extended OAM Commands |
2-6 |
|
alarm oam dying-gasp |
10-Extended OAM Commands |
2-7 |
|
alarm oam error-frame |
10-Extended OAM Commands |
2-11 |
|
alarm oam error-frame enable |
10-Extended OAM Commands |
2-12 |
|
alarm oam error-frame-period |
10-Extended OAM Commands |
2-10 |
|
alarm oam error-frame-period enable |
10-Extended OAM Commands |
2-11 |
|
alarm oam error-frame-seconds-summary |
10-Extended OAM Commands |
2-13 |
|
alarm oam error-frame-seconds-summary enable |
10-Extended OAM Commands |
2-14 |
|
alarm oam error-symbol-period |
10-Extended OAM Commands |
2-8 |
|
alarm oam error-symbol-period enable |
10-Extended OAM Commands |
2-9 |
|
alarm oam local-link-fault |
10-Extended OAM Commands |
2-15 |
|
alarm oam-vendor-specific |
10-Extended OAM Commands |
2-15 |
|
alarm onu-over-limitation |
10-Extended OAM Commands |
2-16 |
|
alarm port bit-error-rate |
10-Extended OAM Commands |
2-17 |
|
alarm registration-error |
10-Extended OAM Commands |
2-17 |
|
alarm remote-stable |
10-Extended OAM Commands |
2-18 |
|
alarm software-error |
10-Extended OAM Commands |
2-19 |
|
arp check enable |
18-ARP Commands |
1-1 |
|
arp max-learning-num |
18-ARP Commands |
1-1 |
|
arp static |
18-ARP Commands |
1-2 |
|
arp timer aging |
18-ARP Commands |
1-3 |
|
ascii |
31-File System Management Commands |
2-6 |
|
authentication default |
24-AAA Commands |
1-6 |
|
authentication lan-access |
24-AAA Commands |
1-7 |
|
authentication login |
24-AAA Commands |
1-8 |
|
authentication-mode |
02-Login Commands |
1-1 |
|
authorization command |
24-AAA Commands |
1-8 |
|
authorization default |
24-AAA Commands |
1-9 |
|
authorization lan-access |
24-AAA Commands |
1-10 |
|
authorization login |
24-AAA Commands |
1-11 |
|
authorization-attribute |
24-AAA Commands |
1-12 |
|
auto-execute command |
02-Login Commands |
1-2 |
|
|
|
|
|
backup startup-configuration |
31-File System Management Commands |
1-13 |
|
bandwidth downstream |
23-QoS Commands |
1-1 |
|
bandwidth downstream high-priority enable |
23-QoS Commands |
1-5 |
|
bandwidth downstream policy enable |
23-QoS Commands |
1-2 |
|
bandwidth downstream priority-queue |
23-QoS Commands |
1-6 |
|
binary |
31-File System Management Commands |
2-7 |
|
bind onuid |
01-EPON-OLT Command |
2-1 |
|
bind-attribute |
24-AAA Commands |
1-14 |
|
boot-loader |
32-System Configuration and Debugging Command |
2-1 |
|
bootrom |
32-System Configuration and Debugging Command |
2-2 |
|
bootrom-update security-check enable |
32-System Configuration and Debugging Command |
2-2 |
|
bpdu-tunnel dot1q stp |
13-BPDU Tunneling Commands |
1-1 |
|
bpdu-tunnel tunnel-dmac |
13-BPDU Tunneling Commands |
1-2 |
|
broadcast-suppression |
03-Port Commands |
1-1 |
|
bye |
25-SSH2.0 Commands |
1-15 |
|
bye |
31-File System Management Commands |
2-7 |
|
|
|
|
|
car |
23-QoS Commands |
2-8 |
|
cd |
25-SSH2.0 Commands |
1-15 |
|
cd |
31-File System Management Commands |
1-1 |
|
cd |
31-File System Management Commands |
2-8 |
|
cdup |
25-SSH2.0 Commands |
1-16 |
|
cdup |
31-File System Management Commands |
2-8 |
|
check region-configuration |
15-MSTP Commands |
1-1 |
|
classifier behavior |
23-QoS Commands |
2-18 |
|
clock datetime |
32-System Configuration and Debugging Command |
1-1 |
|
clock summer-time one-off |
32-System Configuration and Debugging Command |
1-1 |
|
clock summer-time repeating |
32-System Configuration and Debugging Command |
1-2 |
|
clock timezone |
32-System Configuration and Debugging Command |
1-4 |
|
close |
31-File System Management Commands |
2-9 |
|
command-privilege level |
32-System Configuration and Debugging Command |
1-5 |
|
control-vlan |
16-RRPP Commands |
1-1 |
|
copy |
31-File System Management Commands |
1-1 |
|
copyright-info enable |
32-System Configuration and Debugging Command |
1-6 |
|
cut connection |
24-AAA Commands |
1-15 |
|
|
|
|
|
databits |
02-Login Commands |
1-3 |
|
data-flow-format (HWTACACS scheme view) |
24-AAA Commands |
3-1 |
|
data-flow-format (RADIUS scheme view) |
24-AAA Commands |
2-3 |
|
dba-algorithm enable |
01-EPON-OLT Command |
1-1 |
|
dba-algorithm update |
01-EPON-OLT Command |
1-2 |
|
dba-parameters |
01-EPON-OLT Command |
1-2 |
|
dba-report queue-id |
01-EPON-OLT Command |
2-2 |
|
dba-report queue-set-number |
01-EPON-OLT Command |
2-2 |
|
debugging |
31-File System Management Commands |
2-9 |
|
debugging |
32-System Configuration and Debugging Command |
3-6 |
|
delete |
25-SSH2.0 Commands |
1-16 |
|
delete |
31-File System Management Commands |
1-2 |
|
delete |
31-File System Management Commands |
2-11 |
|
delete static-routes all |
20-Static Routing Commands |
2-1 |
|
deregister onu |
01-EPON-OLT Command |
2-3 |
|
description |
03-Port Commands |
1-2 |
|
description |
05-Link Aggregation Commands |
1-1 |
|
description |
11-VLAN Commands |
1-1 |
|
description (for IPv4) |
22-ACL Commands |
1-7 |
|
description (for IPv6) |
22-ACL Commands |
1-21 |
|
dhcp-snooping |
19-DHCP Snooping Commands |
1-1 |
|
dhcp-snooping information circuit-id format-type |
19-DHCP Snooping Commands |
1-2 |
|
dhcp-snooping information circuit-id string |
19-DHCP Snooping Commands |
1-2 |
|
dhcp-snooping information enable |
19-DHCP Snooping Commands |
1-3 |
|
dhcp-snooping information format |
19-DHCP Snooping Commands |
1-4 |
|
dhcp-snooping information remote-id format-type |
19-DHCP Snooping Commands |
1-5 |
|
dhcp-snooping information remote-id string |
19-DHCP Snooping Commands |
1-6 |
|
dhcp-snooping information strategy |
19-DHCP Snooping Commands |
1-7 |
|
dhcp-snooping trust |
19-DHCP Snooping Commands |
1-7 |
|
dir |
25-SSH2.0 Commands |
1-17 |
|
dir |
31-File System Management Commands |
1-3 |
|
dir |
31-File System Management Commands |
2-11 |
|
disconnect |
31-File System Management Commands |
2-12 |
|
display acl |
22-ACL Commands |
1-8 |
|
display acl ipv6 |
22-ACL Commands |
1-22 |
|
display acl resource |
22-ACL Commands |
1-1 |
|
display arp |
18-ARP Commands |
1-3 |
|
display arp ip-address |
18-ARP Commands |
1-5 |
|
display arp timer aging |
18-ARP Commands |
1-5 |
|
display boot-loader |
32-System Configuration and Debugging Command |
2-3 |
|
display brief interface |
03-Port Commands |
1-3 |
|
display channel |
29-Information Center Commands |
1-1 |
|
display clipboard |
32-System Configuration and Debugging Command |
1-7 |
|
display clock |
32-System Configuration and Debugging Command |
1-8 |
|
display connection |
24-AAA Commands |
1-16 |
|
display cpu-usage |
32-System Configuration and Debugging Command |
2-3 |
|
display cpu-usage history |
32-System Configuration and Debugging Command |
2-6 |
|
display current-configuration |
32-System Configuration and Debugging Command |
1-8 |
|
display debugging |
32-System Configuration and Debugging Command |
3-7 |
|
display default-configuration |
32-System Configuration and Debugging Command |
1-10 |
|
display device |
32-System Configuration and Debugging Command |
2-8 |
|
display device manuinfo |
32-System Configuration and Debugging Command |
2-8 |
|
display dhcp-snooping |
19-DHCP Snooping Commands |
1-8 |
|
display dhcp-snooping information |
19-DHCP Snooping Commands |
1-9 |
|
display dhcp-snooping packet statistics |
19-DHCP Snooping Commands |
1-10 |
|
display dhcp-snooping trust |
19-DHCP Snooping Commands |
1-10 |
|
display diagnostic-information |
32-System Configuration and Debugging Command |
1-10 |
|
display dldp |
09-DLDP-Fiber Backup Commands |
1-1 |
|
display dldp statistics |
09-DLDP-Fiber Backup Commands |
1-3 |
|
display dns domain |
30-DNS Commands |
1-1 |
|
display dns dynamic-host |
30-DNS Commands |
1-2 |
|
display dns server |
30-DNS Commands |
1-2 |
|
display domain |
24-AAA Commands |
1-17 |
|
display epon statistics interface |
01-EPON-OLT Command |
1-8 |
|
display epon-capability interface |
01-EPON-OLT Command |
1-3 |
|
display epon-multicast information |
21-Multicast Commands |
1-1 |
|
display epon-oam interface |
10-Extended OAM Commands |
1-1 |
|
display epon-parameter |
01-EPON-OLT Command |
1-5 |
|
display epon-version interface |
01-EPON-OLT Command |
1-6 |
|
display epon-workmode interface |
01-EPON-OLT Command |
1-7 |
|
display fan |
32-System Configuration and Debugging Command |
2-9 |
|
display fib |
17-IP Addressing-IP Performance Optimization Commands |
2-1 |
|
display fib ip-address |
17-IP Addressing-IP Performance Optimization Commands |
2-3 |
|
display fiber-backup group |
09-DLDP-Fiber Backup Commands |
2-1 |
|
display ftp client configuration |
31-File System Management Commands |
2-13 |
|
display ftp-server |
31-File System Management Commands |
2-1 |
|
display ftp-user |
31-File System Management Commands |
2-2 |
|
display history-command |
32-System Configuration and Debugging Command |
1-11 |
|
display hotkey |
32-System Configuration and Debugging Command |
1-12 |
|
display hwtacacs |
24-AAA Commands |
3-1 |
|
display icmp statistics |
17-IP Addressing-IP Performance Optimization Commands |
2-4 |
|
display igmp-snooping group |
21-Multicast Commands |
2-1 |
|
display igmp-snooping statistics |
21-Multicast Commands |
2-2 |
|
display info-center |
29-Information Center Commands |
1-2 |
|
display interface |
03-Port Commands |
1-5 |
|
display interface vlan-interface |
11-VLAN Commands |
1-2 |
|
display ip host |
30-DNS Commands |
1-3 |
|
display ip interface |
17-IP Addressing-IP Performance Optimization Commands |
1-1 |
|
display ip interface brief |
17-IP Addressing-IP Performance Optimization Commands |
1-3 |
|
display ip routing-table |
20-Static Routing Commands |
1-1 |
|
display ip routing-table acl |
20-Static Routing Commands |
1-5 |
|
display ip routing-table ip-address |
20-Static Routing Commands |
1-6 |
|
display ip routing-table protocol |
20-Static Routing Commands |
1-8 |
|
display ip routing-table statistics |
20-Static Routing Commands |
1-9 |
|
display ip socket |
17-IP Addressing-IP Performance Optimization Commands |
2-5 |
|
display ip statistics |
17-IP Addressing-IP Performance Optimization Commands |
2-8 |
|
display lacp system-id |
05-Link Aggregation Commands |
1-2 |
|
display link-aggregation load-sharing mode |
05-Link Aggregation Commands |
1-2 |
|
display link-aggregation member-port |
05-Link Aggregation Commands |
1-3 |
|
display link-aggregation summary |
05-Link Aggregation Commands |
1-6 |
|
display link-aggregation verbose |
05-Link Aggregation Commands |
1-7 |
|
display local-user |
24-AAA Commands |
1-18 |
|
display logbuffer |
29-Information Center Commands |
1-4 |
|
display logbuffer summary |
29-Information Center Commands |
1-6 |
|
display mac-address |
04-MAC Address Table Commands |
1-1 |
|
display mac-address aging-time |
04-MAC Address Table Commands |
1-2 |
|
display memory |
32-System Configuration and Debugging Command |
2-10 |
|
display mib-style |
27-SNMP-RMON Commands |
2-1 |
|
display mirroring-group |
07-Port Mirroring Commands |
1-1 |
|
display multicast-vlan |
21-Multicast Commands |
3-1 |
|
display ntp-service sessions |
28-NTP Commands |
1-1 |
|
display ntp-service status |
28-NTP Commands |
1-3 |
|
display ntp-service trace |
28-NTP Commands |
1-4 |
|
display onu-event interface |
01-EPON-OLT Command |
2-4 |
|
display onu-event interface |
29-Information Center Commands |
1-8 |
|
display onuinfo |
01-EPON-OLT Command |
1-9 |
|
display onuinfo mac-address |
01-EPON-OLT Command |
1-11 |
|
display onuinfo silent |
01-EPON-OLT Command |
1-12 |
|
display onu-protocol |
15-MSTP Commands |
1-11 |
|
display onu-protocol |
19-DHCP Snooping Commands |
1-11 |
|
display onu-protocol igmp-snooping |
21-Multicast Commands |
1-2 |
|
display optics-parameters interface |
03-Port Commands |
1-8 |
|
display patch information |
32-System Configuration and Debugging Command |
4-1 |
|
display port |
11-VLAN Commands |
1-9 |
|
display port combo |
03-Port Commands |
1-11 |
|
display port-group manual |
03-Port Commands |
1-12 |
|
display port-isolate group |
06-Port Isolation Commands |
1-1 |
|
display power |
32-System Configuration and Debugging Command |
2-10 |
|
display protocol-vlan interface |
11-VLAN Commands |
1-21 |
|
display protocol-vlan vlan |
11-VLAN Commands |
1-22 |
|
display public-key local public |
26-Public Key Commands |
1-1 |
|
display public-key peer |
26-Public Key Commands |
1-2 |
|
display qos lr interface |
23-QoS Commands |
1-4 |
|
display qos map-table |
23-QoS Commands |
4-1 |
|
display qos policy |
23-QoS Commands |
2-19 |
|
display qos policy global |
23-QoS Commands |
2-20 |
|
display qos policy interface |
23-QoS Commands |
2-21 |
|
display qos sp |
23-QoS Commands |
3-1 |
|
display qos trust interface |
23-QoS Commands |
4-9 |
|
display qos vlan-policy |
23-QoS Commands |
2-22 |
|
display qos wfq interface |
23-QoS Commands |
3-6 |
|
display qos wrr interface |
23-QoS Commands |
3-2 |
|
display radius scheme |
24-AAA Commands |
2-4 |
|
display radius statistics |
24-AAA Commands |
2-6 |
|
display reboot-type |
32-System Configuration and Debugging Command |
2-11 |
|
display rmon alarm |
27-SNMP-RMON Commands |
3-1 |
|
display rmon event |
27-SNMP-RMON Commands |
3-2 |
|
display rmon eventlog |
27-SNMP-RMON Commands |
3-3 |
|
display rmon history |
27-SNMP-RMON Commands |
3-4 |
|
display rmon prialarm |
27-SNMP-RMON Commands |
3-7 |
|
display rmon statistics |
27-SNMP-RMON Commands |
3-8 |
|
display rrpp brief |
16-RRPP Commands |
1-2 |
|
display rrpp statistics |
16-RRPP Commands |
1-3 |
|
display rrpp verbose |
16-RRPP Commands |
1-5 |
|
display saved-configuration |
31-File System Management Commands |
1-14 |
|
display schedule job |
32-System Configuration and Debugging Command |
2-11 |
|
display schedule reboot |
32-System Configuration and Debugging Command |
2-12 |
|
display sftp client source |
25-SSH2.0 Commands |
1-18 |
|
display smart-link flush |
08-Smart Link Commands |
1-1 |
|
display smart-link group |
08-Smart Link Commands |
1-2 |
|
display snmp-agent community |
27-SNMP-RMON Commands |
1-1 |
|
display snmp-agent group |
27-SNMP-RMON Commands |
1-2 |
|
display snmp-agent local-engineid |
27-SNMP-RMON Commands |
1-3 |
|
display snmp-agent mib-view |
27-SNMP-RMON Commands |
1-4 |
|
display snmp-agent statistics |
27-SNMP-RMON Commands |
1-5 |
|
display snmp-agent sys-info |
27-SNMP-RMON Commands |
1-7 |
|
display snmp-agent trap queue |
27-SNMP-RMON Commands |
1-8 |
|
display snmp-agent trap-list |
27-SNMP-RMON Commands |
1-8 |
|
display snmp-agent usm-user |
27-SNMP-RMON Commands |
1-9 |
|
display ssh client source |
25-SSH2.0 Commands |
1-8 |
|
display ssh server |
25-SSH2.0 Commands |
1-1 |
|
display ssh server-info |
25-SSH2.0 Commands |
1-9 |
|
display ssh user-information |
25-SSH2.0 Commands |
1-2 |
|
display startup |
31-File System Management Commands |
1-16 |
|
display stop-accounting-buffer |
24-AAA Commands |
2-9 |
|
display stop-accounting-buffer |
24-AAA Commands |
3-3 |
|
display stp |
15-MSTP Commands |
1-3 |
|
display stp abnormal-port |
15-MSTP Commands |
1-6 |
|
display stp down-port |
15-MSTP Commands |
1-7 |
|
display stp history |
15-MSTP Commands |
1-8 |
|
display stp region-configuration |
15-MSTP Commands |
1-9 |
|
display stp root |
15-MSTP Commands |
1-10 |
|
display stp tc |
15-MSTP Commands |
1-11 |
|
display system-failure |
32-System Configuration and Debugging Command |
2-13 |
|
display tcp statistics |
17-IP Addressing-IP Performance Optimization Commands |
2-9 |
|
display tcp status |
17-IP Addressing-IP Performance Optimization Commands |
2-12 |
|
display tftp client configuration |
31-File System Management Commands |
3-1 |
|
display this |
32-System Configuration and Debugging Command |
1-13 |
|
display time-range |
22-ACL Commands |
1-2 |
|
display traffic behavior |
23-QoS Commands |
2-9 |
|
display traffic classifier |
23-QoS Commands |
2-1 |
|
display trapbuffer |
29-Information Center Commands |
1-7 |
|
display udp statistics |
17-IP Addressing-IP Performance Optimization Commands |
2-13 |
|
display uni-information |
03-Port Commands |
1-13 |
|
display user-group |
24-AAA Commands |
1-20 |
|
display user-interface |
02-Login Commands |
1-4 |
|
display vendor-specific information |
01-EPON-OLT Command |
2-5 |
|
display version |
32-System Configuration and Debugging Command |
1-15 |
|
display vlan |
11-VLAN Commands |
1-3 |
|
dldp authentication-mode |
09-DLDP-Fiber Backup Commands |
1-4 |
|
dldp delaydown-timer |
09-DLDP-Fiber Backup Commands |
1-5 |
|
dldp enable |
09-DLDP-Fiber Backup Commands |
1-5 |
|
dldp interval |
09-DLDP-Fiber Backup Commands |
1-6 |
|
dldp reset |
09-DLDP-Fiber Backup Commands |
1-7 |
|
dldp unidirectional-shutdown |
09-DLDP-Fiber Backup Commands |
1-8 |
|
dldp work-mode |
09-DLDP-Fiber Backup Commands |
1-8 |
|
dns domain |
30-DNS Commands |
1-4 |
|
dns resolve |
30-DNS Commands |
1-5 |
|
dns server |
30-DNS Commands |
1-5 |
|
domain |
24-AAA Commands |
1-20 |
|
domain default enable |
24-AAA Commands |
1-21 |
|
duplex |
03-Port Commands |
1-16 |
|
|
|
|
|
eap offload |
24-AAA Commands |
2-9 |
|
eap-profile |
24-AAA Commands |
1-22 |
|
enable log updown |
29-Information Center Commands |
1-9 |
|
enable snmp trap updown |
05-Link Aggregation Commands |
1-9 |
|
enable snmp trap updown |
27-SNMP-RMON Commands |
1-10 |
|
encrypt enable |
01-EPON-OLT Command |
2-7 |
|
encrypt key |
01-EPON-OLT Command |
2-8 |
|
encryption timer |
01-EPON-OLT Command |
1-12 |
|
epon-parameter ouilist |
01-EPON-OLT Command |
1-13 |
|
epon-parameter ouilist |
10-Extended OAM Commands |
1-2 |
|
execute |
31-File System Management Commands |
1-4 |
|
exit |
25-SSH2.0 Commands |
1-18 |
|
expiration-date |
24-AAA Commands |
1-22 |
|
|
|
|
|
fast-leave (IGMP-Snooping view) |
21-Multicast Commands |
2-3 |
|
fiber-backup group |
09-DLDP-Fiber Backup Commands |
2-2 |
|
file prompt |
31-File System Management Commands |
1-4 |
|
filter |
23-QoS Commands |
2-11 |
|
fixdisk |
31-File System Management Commands |
1-5 |
|
flow-control |
03-Port Commands |
1-17 |
|
flow-interval |
03-Port Commands |
1-18 |
|
flush enable |
08-Smart Link Commands |
1-3 |
|
format |
31-File System Management Commands |
1-6 |
|
forward-error-correction enable |
01-EPON-OLT Command |
2-9 |
|
free ftp user |
31-File System Management Commands |
2-3 |
|
free user-interface |
02-Login Commands |
1-5 |
|
ftp |
31-File System Management Commands |
2-14 |
|
ftp client source |
31-File System Management Commands |
2-15 |
|
ftp server acl |
31-File System Management Commands |
2-3 |
|
ftp server enable |
31-File System Management Commands |
2-4 |
|
ftp timeout |
31-File System Management Commands |
2-4 |
|
ftp update |
31-File System Management Commands |
2-5 |
|
|
|
|
|
get |
25-SSH2.0 Commands |
1-19 |
|
get |
31-File System Management Commands |
2-16 |
|
grant-filtering enable |
01-EPON-OLT Command |
1-14 |
|
gratuitous-arp-learning enable |
18-ARP Commands |
1-7 |
|
gratuitous-arp-sending enable |
18-ARP Commands |
1-7 |
|
group |
24-AAA Commands |
1-23 |
|
group member |
09-DLDP-Fiber Backup Commands |
2-3 |
|
group-member |
03-Port Commands |
1-18 |
|
group-policy (IGMP-Snooping view) |
21-Multicast Commands |
2-4 |
|
|
|
|
|
header |
32-System Configuration and Debugging Command |
1-15 |
|
help |
25-SSH2.0 Commands |
1-20 |
|
history-command max-size |
02-Login Commands |
1-6 |
|
host-aging-time (IGMP-Snooping view) |
21-Multicast Commands |
2-5 |
|
hotkey |
32-System Configuration and Debugging Command |
1-17 |
|
hwtacacs nas-ip |
24-AAA Commands |
3-4 |
|
hwtacacs scheme |
24-AAA Commands |
3-5 |
|
|
|
|
|
idle-cut enable |
24-AAA Commands |
1-24 |
|
idle-timeout |
02-Login Commands |
1-6 |
|
if-match |
23-QoS Commands |
2-2 |
|
igmp-snooping |
21-Multicast Commands |
2-6 |
|
igmp-snooping drop-unknown |
21-Multicast Commands |
2-6 |
|
igmp-snooping enable |
21-Multicast Commands |
2-7 |
|
igmp-snooping fast-leave |
21-Multicast Commands |
2-8 |
|
igmp-snooping general-query source-ip |
21-Multicast Commands |
2-8 |
|
igmp-snooping group-limit |
21-Multicast Commands |
2-9 |
|
igmp-snooping group-policy |
21-Multicast Commands |
2-10 |
|
igmp-snooping host-aging-time |
21-Multicast Commands |
2-11 |
|
igmp-snooping host-join |
21-Multicast Commands |
2-12 |
|
igmp-snooping last-member-query-interval |
21-Multicast Commands |
2-13 |
|
igmp-snooping max-response-time |
21-Multicast Commands |
2-14 |
|
igmp-snooping overflow-replace |
21-Multicast Commands |
2-15 |
|
igmp-snooping querier |
21-Multicast Commands |
2-15 |
|
igmp-snooping query-interval |
21-Multicast Commands |
2-16 |
|
igmp-snooping router-aging-time |
21-Multicast Commands |
2-17 |
|
igmp-snooping source-deny |
21-Multicast Commands |
2-18 |
|
igmp-snooping special-query source-ip |
21-Multicast Commands |
2-18 |
|
igmp-snooping version |
21-Multicast Commands |
2-19 |
|
import |
23-QoS Commands |
4-2 |
|
info-center channel name |
29-Information Center Commands |
1-10 |
|
info-center console channel |
29-Information Center Commands |
1-11 |
|
info-center enable |
29-Information Center Commands |
1-11 |
|
info-center logbuffer |
29-Information Center Commands |
1-12 |
|
info-center loghost |
29-Information Center Commands |
1-13 |
|
info-center loghost source |
29-Information Center Commands |
1-14 |
|
info-center monitor channel |
29-Information Center Commands |
1-15 |
|
info-center snmp channel |
29-Information Center Commands |
1-15 |
|
info-center source |
29-Information Center Commands |
1-16 |
|
info-center synchronous |
29-Information Center Commands |
1-19 |
|
info-center timestamp |
29-Information Center Commands |
1-20 |
|
info-center timestamp loghost |
29-Information Center Commands |
1-21 |
|
info-center trapbuffer |
29-Information Center Commands |
1-22 |
|
instance |
15-MSTP Commands |
1-13 |
|
interface |
03-Port Commands |
1-19 |
|
interface bridge-aggregation |
05-Link Aggregation Commands |
1-10 |
|
interface vlan-interface |
11-VLAN Commands |
1-5 |
|
ip address |
01-EPON-OLT Command |
2-9 |
|
ip address |
11-VLAN Commands |
1-5 |
|
ip address |
17-IP Addressing-IP Performance Optimization Commands |
1-4 |
|
ip host |
30-DNS Commands |
1-6 |
|
ip redirects enable |
17-IP Addressing-IP Performance Optimization Commands |
2-14 |
|
ip route-static |
20-Static Routing Commands |
2-1 |
|
ip route-static default-preference |
20-Static Routing Commands |
2-3 |
|
ip ttl-expires enable |
17-IP Addressing-IP Performance Optimization Commands |
2-14 |
|
ip unreachables enable |
17-IP Addressing-IP Performance Optimization Commands |
2-15 |
|
|
|
|
|
jumboframe enable |
03-Port Commands |
1-19 |
|
|
|
|
|
key (HWTACACS scheme view) |
24-AAA Commands |
3-6 |
|
key (RADIUS scheme view) |
24-AAA Commands |
2-10 |
|
|
|
|
|
lacp port-priority |
05-Link Aggregation Commands |
1-11 |
|
lacp system-priority |
05-Link Aggregation Commands |
1-12 |
|
last-member-query-interval (IGMP-Snooping view) |
21-Multicast Commands |
2-20 |
|
lcd |
31-File System Management Commands |
2-16 |
|
link-aggregation load-sharing mode |
05-Link Aggregation Commands |
1-12 |
|
link-aggregation mode |
05-Link Aggregation Commands |
1-13 |
|
link-delay |
03-Port Commands |
1-21 |
|
linktest |
03-Port Commands |
1-21 |
|
local-server authentication eap-profile |
24-AAA Commands |
1-24 |
|
local-user |
24-AAA Commands |
1-25 |
|
local-user password-display-mode |
24-AAA Commands |
1-26 |
|
lock |
02-Login Commands |
1-7 |
|
loopback |
03-Port Commands |
1-22 |
|
loopback enable |
03-Port Commands |
1-23 |
|
ls |
25-SSH2.0 Commands |
1-20 |
|
ls |
31-File System Management Commands |
2-17 |
|
|
|
|
|
mac-address (Interface view) |
04-MAC Address Table Commands |
1-3 |
|
mac-address (system view) |
04-MAC Address Table Commands |
1-4 |
|
mac-address mac-learning disable |
04-MAC Address Table Commands |
1-5 |
|
mac-address max-mac-count (Interface view) |
04-MAC Address Table Commands |
1-6 |
|
mac-address timer |
04-MAC Address Table Commands |
1-7 |
|
management-vlan |
01-EPON-OLT Command |
2-10 |
|
max-response-time (IGMP-Snooping view) |
21-Multicast Commands |
2-21 |
|
max-rtt |
01-EPON-OLT Command |
1-15 |
|
mdi |
03-Port Commands |
1-24 |
|
method |
24-AAA Commands |
1-27 |
|
mib-style |
27-SNMP-RMON Commands |
2-1 |
|
mirroring-group |
07-Port Mirroring Commands |
1-2 |
|
mirroring-group mirroring-port |
07-Port Mirroring Commands |
1-3 |
|
mirroring-group monitor-egress |
07-Port Mirroring Commands |
1-4 |
|
mirroring-group monitor-port |
07-Port Mirroring Commands |
1-5 |
|
mirroring-group remote-probe vlan |
07-Port Mirroring Commands |
1-6 |
|
mirroring-port |
07-Port Mirroring Commands |
1-6 |
|
mirror-to cpu |
23-QoS Commands |
5-1 |
|
mirror-to interface |
23-QoS Commands |
5-1 |
|
mkdir |
25-SSH2.0 Commands |
1-21 |
|
mkdir |
31-File System Management Commands |
1-6 |
|
mkdir |
31-File System Management Commands |
2-18 |
|
monitor enable |
10-Extended OAM Commands |
2-19 |
|
monitor-port |
07-Port Mirroring Commands |
1-7 |
|
more |
31-File System Management Commands |
1-7 |
|
move |
31-File System Management Commands |
1-8 |
|
multicast vlan dest-ip |
21-Multicast Commands |
1-5 |
|
multicast-control host-aging-time |
21-Multicast Commands |
1-3 |
|
multicast-mode |
21-Multicast Commands |
1-4 |
|
multicast-suppression |
03-Port Commands |
1-25 |
|
multicast-vlan |
21-Multicast Commands |
3-2 |
|
|
|
|
|
name |
11-VLAN Commands |
1-6 |
|
nas-ip (HWTACACS scheme view) |
24-AAA Commands |
3-6 |
|
nas-ip (RADIUS scheme view) |
24-AAA Commands |
2-11 |
|
ntp-service access |
28-NTP Commands |
1-5 |
|
ntp-service authentication enable |
28-NTP Commands |
1-6 |
|
ntp-service authentication-keyid |
28-NTP Commands |
1-7 |
|
ntp-service broadcast-client |
28-NTP Commands |
1-8 |
|
ntp-service broadcast-server |
28-NTP Commands |
1-9 |
|
ntp-service in-interface disable |
28-NTP Commands |
1-9 |
|
ntp-service max-dynamic-sessions |
28-NTP Commands |
1-10 |
|
ntp-service multicast-client |
28-NTP Commands |
1-11 |
|
ntp-service multicast-server |
28-NTP Commands |
1-11 |
|
ntp-service reliable authentication-keyid |
28-NTP Commands |
1-12 |
|
ntp-service source-interface |
28-NTP Commands |
1-13 |
|
ntp-service unicast-peer |
28-NTP Commands |
1-13 |
|
ntp-service unicast-server |
28-NTP Commands |
1-14 |
|
|
|
|
|
oam-discovery-timeout |
10-Extended OAM Commands |
1-3 |
|
onu port-isolate |
06-Port Isolation Commands |
1-3 |
|
onu-event |
29-Information Center Commands |
1-24 |
|
onu-protocol enable |
15-MSTP Commands |
1-13 |
|
onu-protocol enable |
19-DHCP Snooping Commands |
1-12 |
|
onu-protocol igmp-snooping |
21-Multicast Commands |
1-5 |
|
onu-protocol pppoe enable |
01-EPON-OLT Command |
2-11 |
|
open |
31-File System Management Commands |
2-19 |
|
overflow-replace (IGMP-Snooping view) |
21-Multicast Commands |
2-21 |
|
|
|
|
|
parity |
02-Login Commands |
1-8 |
|
passive |
31-File System Management Commands |
2-20 |
|
password |
24-AAA Commands |
1-27 |
|
patch active |
32-System Configuration and Debugging Command |
4-2 |
|
patch deactive |
32-System Configuration and Debugging Command |
4-2 |
|
patch delete |
32-System Configuration and Debugging Command |
4-3 |
|
patch install |
32-System Configuration and Debugging Command |
4-3 |
|
patch load |
32-System Configuration and Debugging Command |
4-4 |
|
patch location |
32-System Configuration and Debugging Command |
4-5 |
|
patch run |
32-System Configuration and Debugging Command |
4-5 |
|
peer-public-key end |
26-Public Key Commands |
1-3 |
|
ping |
32-System Configuration and Debugging Command |
3-1 |
|
port |
08-Smart Link Commands |
1-3 |
|
port |
11-VLAN Commands |
1-10 |
|
port (multicast VLAN view) |
21-Multicast Commands |
3-2 |
|
port access vlan |
11-VLAN Commands |
1-11 |
|
port fiber-backup group |
09-DLDP-Fiber Backup Commands |
2-3 |
|
port hybrid protocol-vlan |
11-VLAN Commands |
1-23 |
|
port hybrid pvid vlan |
11-VLAN Commands |
1-12 |
|
port hybrid vlan |
11-VLAN Commands |
1-13 |
|
port link-aggregation group |
05-Link Aggregation Commands |
1-14 |
|
port link-type |
11-VLAN Commands |
1-14 |
|
port multicast-vlan |
21-Multicast Commands |
3-3 |
|
port smart-link group |
08-Smart Link Commands |
1-4 |
|
port switch-over |
09-DLDP-Fiber Backup Commands |
2-4 |
|
port trunk permit vlan |
11-VLAN Commands |
1-15 |
|
port trunk pvid vlan |
11-VLAN Commands |
1-17 |
|
port-group manual |
03-Port Commands |
1-27 |
|
port-isolate enable |
06-Port Isolation Commands |
1-2 |
|
preemption delay |
08-Smart Link Commands |
1-5 |
|
preemption mode |
08-Smart Link Commands |
1-6 |
|
primary accounting (HWTACACS scheme view) |
24-AAA Commands |
3-7 |
|
primary accounting (RADIUS scheme view) |
24-AAA Commands |
2-12 |
|
primary authentication (HWTACACS scheme view) |
24-AAA Commands |
3-8 |
|
primary authentication (RADIUS scheme view) |
24-AAA Commands |
2-13 |
|
primary authorization |
24-AAA Commands |
3-9 |
|
priority-queue-mapping |
23-QoS Commands |
4-2 |
|
protected-vlan |
08-Smart Link Commands |
1-7 |
|
protected-vlan |
16-RRPP Commands |
1-7 |
|
protocol inbound |
02-Login Commands |
1-9 |
|
protocol-vlan |
11-VLAN Commands |
1-25 |
|
public-key local create |
26-Public Key Commands |
1-6 |
|
public-key local destroy |
26-Public Key Commands |
1-7 |
|
public-key local export dsa |
26-Public Key Commands |
1-7 |
|
public-key local export rsa |
26-Public Key Commands |
1-9 |
|
public-key peer |
26-Public Key Commands |
1-10 |
|
public-key peer import sshkey |
26-Public Key Commands |
1-10 |
|
public-key-code begin |
26-Public Key Commands |
1-4 |
|
public-key-code end |
26-Public Key Commands |
1-5 |
|
put |
25-SSH2.0 Commands |
1-21 |
|
put |
31-File System Management Commands |
2-20 |
|
pwd |
25-SSH2.0 Commands |
1-22 |
|
pwd |
31-File System Management Commands |
1-8 |
|
pwd |
31-File System Management Commands |
2-21 |
|
|
|
|
|
qinq enable |
12-QinQ Commands |
1-2 |
|
qinq ethernet-type |
12-QinQ Commands |
1-3 |
|
qinq vid |
12-QinQ Commands |
1-4 |
|
qos apply policy (interface view, port group view) |
23-QoS Commands |
2-24 |
|
qos apply policy global |
23-QoS Commands |
2-24 |
|
qos cos-local-precedence-map |
23-QoS Commands |
4-4 |
|
qos lr |
23-QoS Commands |
1-5 |
|
qos map-table |
23-QoS Commands |
4-6 |
|
qos policy |
23-QoS Commands |
2-25 |
|
qos priority |
23-QoS Commands |
4-8 |
|
qos sp |
23-QoS Commands |
3-2 |
|
qos trust |
23-QoS Commands |
4-10 |
|
qos vlan-policy |
23-QoS Commands |
2-26 |
|
qos wfq |
23-QoS Commands |
3-7 |
|
qos wfq weight |
23-QoS Commands |
3-7 |
|
qos wrr |
23-QoS Commands |
3-3 |
|
qos wrr group sp |
23-QoS Commands |
3-4 |
|
qos wrr weight |
23-QoS Commands |
3-5 |
|
quit |
25-SSH2.0 Commands |
1-23 |
|
quit |
31-File System Management Commands |
2-21 |
|
quit |
32-System Configuration and Debugging Command |
1-18 |
|
|
|
|
|
radius client |
24-AAA Commands |
2-13 |
|
radius nas-ip |
24-AAA Commands |
2-14 |
|
radius scheme |
24-AAA Commands |
2-15 |
|
radius trap |
24-AAA Commands |
2-16 |
|
raw-vlan-id inbound |
12-QinQ Commands |
1-1 |
|
reboot |
32-System Configuration and Debugging Command |
2-13 |
|
reboot onu |
32-System Configuration and Debugging Command |
2-14 |
|
redirect |
23-QoS Commands |
2-11 |
|
region-name |
15-MSTP Commands |
1-14 |
|
remark customer-vlan-id |
23-QoS Commands |
2-12 |
|
remark dot1p |
23-QoS Commands |
2-13 |
|
remark drop-precedence |
23-QoS Commands |
2-14 |
|
remark dscp |
23-QoS Commands |
2-14 |
|
remark ip-precedence |
23-QoS Commands |
2-15 |
|
remark local-precedence |
23-QoS Commands |
2-16 |
|
remark service-vlan-id |
23-QoS Commands |
2-17 |
|
remotehelp |
31-File System Management Commands |
2-22 |
|
remove |
25-SSH2.0 Commands |
1-23 |
|
rename |
25-SSH2.0 Commands |
1-24 |
|
rename |
31-File System Management Commands |
1-9 |
|
report-aggregation (IGMP-Snooping view) |
21-Multicast Commands |
2-22 |
|
reset acl counter |
22-ACL Commands |
1-9 |
|
reset acl ipv6 counter |
22-ACL Commands |
1-23 |
|
reset arp |
18-ARP Commands |
1-6 |
|
reset counters interface |
03-Port Commands |
1-27 |
|
reset counters interface |
05-Link Aggregation Commands |
1-15 |
|
reset counters uni |
03-Port Commands |
1-28 |
|
reset dhcp-snooping |
19-DHCP Snooping Commands |
1-13 |
|
reset dhcp-snooping packet statistics |
19-DHCP Snooping Commands |
1-13 |
|
reset dldp statistics |
09-DLDP-Fiber Backup Commands |
1-9 |
|
reset dns dynamic-host |
30-DNS Commands |
1-7 |
|
reset hwtacacs statistics |
24-AAA Commands |
3-10 |
|
reset igmp-snooping group |
21-Multicast Commands |
2-23 |
|
reset igmp-snooping statistics |
21-Multicast Commands |
2-23 |
|
reset ip routing-table statistics protocol |
20-Static Routing Commands |
1-10 |
|
reset ip statistics |
17-IP Addressing-IP Performance Optimization Commands |
2-15 |
|
reset lacp statistics |
05-Link Aggregation Commands |
1-15 |
|
reset logbuffer |
29-Information Center Commands |
1-23 |
|
reset qos policy global |
23-QoS Commands |
2-26 |
|
reset qos vlan-policy |
23-QoS Commands |
2-27 |
|
reset radius statistics |
24-AAA Commands |
2-17 |
|
reset recycle-bin |
31-File System Management Commands |
1-10 |
|
reset rrpp statistics |
16-RRPP Commands |
1-8 |
|
reset saved-configuration |
31-File System Management Commands |
1-17 |
|
reset smart-link statistics |
08-Smart Link Commands |
1-8 |
|
reset stop-accounting-buffer |
24-AAA Commands |
2-17 |
|
reset stop-accounting-buffer |
24-AAA Commands |
3-10 |
|
reset stp |
15-MSTP Commands |
1-15 |
|
reset tcp statistics |
17-IP Addressing-IP Performance Optimization Commands |
2-16 |
|
reset trapbuffer |
29-Information Center Commands |
1-23 |
|
reset udp statistics |
17-IP Addressing-IP Performance Optimization Commands |
2-16 |
|
reset unused porttag |
32-System Configuration and Debugging Command |
2-15 |
|
restore startup-configuration |
31-File System Management Commands |
1-17 |
|
retry |
24-AAA Commands |
2-18 |
|
retry realtime-accounting |
24-AAA Commands |
2-19 |
|
retry stop-accounting (HWTACACS scheme view) |
24-AAA Commands |
3-11 |
|
retry stop-accounting (RADIUS scheme view) |
24-AAA Commands |
2-20 |
|
return |
32-System Configuration and Debugging Command |
1-19 |
|
revision-level |
15-MSTP Commands |
1-15 |
|
ring |
16-RRPP Commands |
1-8 |
|
ring enable |
16-RRPP Commands |
1-10 |
|
rmdir |
25-SSH2.0 Commands |
1-24 |
|
rmdir |
31-File System Management Commands |
1-11 |
|
rmdir |
31-File System Management Commands |
2-24 |
|
rmon alarm |
27-SNMP-RMON Commands |
3-10 |
|
rmon event |
27-SNMP-RMON Commands |
3-12 |
|
rmon history |
27-SNMP-RMON Commands |
3-14 |
|
rmon prialarm |
27-SNMP-RMON Commands |
3-15 |
|
rmon statistics |
27-SNMP-RMON Commands |
3-17 |
|
router-aging-time (IGMP-Snooping view) |
21-Multicast Commands |
2-24 |
|
rrpp domain |
16-RRPP Commands |
1-11 |
|
rrpp enable |
16-RRPP Commands |
1-12 |
|
rule (advanced IPv4 ACL view) |
22-ACL Commands |
1-11 |
|
rule (advanced IPv6 ACL view) |
22-ACL Commands |
1-25 |
|
rule (basic IPv4 ACL view) |
22-ACL Commands |
1-10 |
|
rule (basic IPv6 ACL view) |
22-ACL Commands |
1-24 |
|
rule (Ethernet frame header ACL view) |
22-ACL Commands |
1-15 |
|
rule comment (for IPv4) |
22-ACL Commands |
1-17 |
|
rule comment (for IPv6) |
22-ACL Commands |
1-29 |
|
|
|
|
|
sample enable |
10-Extended OAM Commands |
2-20 |
|
save |
31-File System Management Commands |
1-18 |
|
schedule job |
32-System Configuration and Debugging Command |
2-15 |
|
schedule reboot at |
32-System Configuration and Debugging Command |
2-17 |
|
schedule reboot delay |
32-System Configuration and Debugging Command |
2-18 |
|
screen-length |
02-Login Commands |
1-10 |
|
screen-length disable |
32-System Configuration and Debugging Command |
1-20 |
|
secondary accounting (HWTACACS scheme view) |
24-AAA Commands |
3-11 |
|
secondary accounting (RADIUS scheme view) |
24-AAA Commands |
2-21 |
|
secondary authentication (HWTACACS scheme view) |
24-AAA Commands |
3-12 |
|
secondary authentication (RADIUS scheme view) |
24-AAA Commands |
2-22 |
|
secondary authorization |
24-AAA Commands |
3-13 |
|
self-service-url enable |
24-AAA Commands |
1-28 |
|
send |
02-Login Commands |
1-10 |
|
server-type |
24-AAA Commands |
2-22 |
|
service-type |
24-AAA Commands |
1-29 |
|
set authentication password |
02-Login Commands |
1-11 |
|
sftp |
25-SSH2.0 Commands |
1-25 |
|
sftp client source |
25-SSH2.0 Commands |
1-26 |
|
sftp server enable |
25-SSH2.0 Commands |
1-13 |
|
sftp server idle-timeout |
25-SSH2.0 Commands |
1-14 |
|
shell |
02-Login Commands |
1-12 |
|
shutdown |
03-Port Commands |
1-29 |
|
shutdown |
05-Link Aggregation Commands |
1-16 |
|
shutdown |
11-VLAN Commands |
1-7 |
|
shutdown management-vlan-interface |
01-EPON-OLT Command |
2-11 |
|
shutdown-interval |
32-System Configuration and Debugging Command |
2-20 |
|
smart-link flush enable |
08-Smart Link Commands |
1-8 |
|
smart-link group |
08-Smart Link Commands |
1-9 |
|
snmp-agent |
27-SNMP-RMON Commands |
1-11 |
|
snmp-agent calculate-password |
27-SNMP-RMON Commands |
1-12 |
|
snmp-agent community |
27-SNMP-RMON Commands |
1-13 |
|
snmp-agent group |
27-SNMP-RMON Commands |
1-15 |
|
snmp-agent local-engineid |
27-SNMP-RMON Commands |
1-16 |
|
snmp-agent log |
27-SNMP-RMON Commands |
1-17 |
|
snmp-agent mib-view |
27-SNMP-RMON Commands |
1-18 |
|
snmp-agent packet max-size |
27-SNMP-RMON Commands |
1-19 |
|
snmp-agent sys-info |
27-SNMP-RMON Commands |
1-19 |
|
snmp-agent target-host |
27-SNMP-RMON Commands |
1-21 |
|
snmp-agent trap enable |
27-SNMP-RMON Commands |
1-22 |
|
snmp-agent trap if-mib link extended |
27-SNMP-RMON Commands |
1-23 |
|
snmp-agent trap life |
27-SNMP-RMON Commands |
1-24 |
|
snmp-agent trap queue-size |
27-SNMP-RMON Commands |
1-24 |
|
snmp-agent trap source |
27-SNMP-RMON Commands |
1-25 |
|
snmp-agent usm-user { v1 | v2c } |
27-SNMP-RMON Commands |
1-26 |
|
snmp-agent usm-user v3 |
27-SNMP-RMON Commands |
1-27 |
|
source-deny (IGMP-Snooping view) |
21-Multicast Commands |
2-24 |
|
speed |
02-Login Commands |
1-13 |
|
speed |
03-Port Commands |
1-29 |
|
speed auto |
03-Port Commands |
1-30 |
|
ssh client authentication server |
25-SSH2.0 Commands |
1-10 |
|
ssh client first-time enable |
25-SSH2.0 Commands |
1-11 |
|
ssh client source |
25-SSH2.0 Commands |
1-11 |
|
ssh server authentication-retries |
25-SSH2.0 Commands |
1-3 |
|
ssh server authentication-timeout |
25-SSH2.0 Commands |
1-4 |
|
ssh server compatible-ssh1x enable |
25-SSH2.0 Commands |
1-5 |
|
ssh server enable |
25-SSH2.0 Commands |
1-6 |
|
ssh server rekey-interval |
25-SSH2.0 Commands |
1-6 |
|
ssh user |
25-SSH2.0 Commands |
1-7 |
|
ssh2 |
25-SSH2.0 Commands |
1-12 |
|
ssl-server-policy |
24-AAA Commands |
1-30 |
|
startup saved-configuration |
31-File System Management Commands |
1-19 |
|
state |
24-AAA Commands |
1-31 |
|
state |
24-AAA Commands |
2-23 |
|
step (for IPv4) |
22-ACL Commands |
1-18 |
|
step (for IPv6) |
22-ACL Commands |
1-30 |
|
stop-accounting-buffer enable (HWTACACS scheme view) |
24-AAA Commands |
3-14 |
|
stop-accounting-buffer enable (RADIUS scheme view) |
24-AAA Commands |
2-24 |
|
stopbits |
02-Login Commands |
1-14 |
|
stp |
15-MSTP Commands |
1-16 |
|
stp bpdu-protection |
15-MSTP Commands |
1-17 |
|
stp bridge-diameter |
15-MSTP Commands |
1-18 |
|
stp compliance |
15-MSTP Commands |
1-18 |
|
stp config-digest-snooping |
15-MSTP Commands |
1-19 |
|
stp cost |
15-MSTP Commands |
1-20 |
|
stp edged-port |
15-MSTP Commands |
1-22 |
|
stp loop-protection |
15-MSTP Commands |
1-23 |
|
stp max-hops |
15-MSTP Commands |
1-23 |
|
stp mcheck |
15-MSTP Commands |
1-24 |
|
stp mode |
15-MSTP Commands |
1-25 |
|
stp no-agreement-check |
15-MSTP Commands |
1-26 |
|
stp pathcost-standard |
15-MSTP Commands |
1-26 |
|
stp point-to-point |
15-MSTP Commands |
1-28 |
|
stp port priority |
15-MSTP Commands |
1-29 |
|
stp port-log |
15-MSTP Commands |
1-30 |
|
stp priority |
15-MSTP Commands |
1-30 |
|
stp region-configuration |
15-MSTP Commands |
1-31 |
|
stp root primary |
15-MSTP Commands |
1-32 |
|
stp root secondary |
15-MSTP Commands |
1-33 |
|
stp root-protection |
15-MSTP Commands |
1-33 |
|
stp tc-protection |
15-MSTP Commands |
1-34 |
|
stp tc-protection threshold |
15-MSTP Commands |
1-35 |
|
stp timer forward-delay |
15-MSTP Commands |
1-35 |
|
stp timer hello |
15-MSTP Commands |
1-36 |
|
stp timer max-age |
15-MSTP Commands |
1-37 |
|
stp timer-factor |
15-MSTP Commands |
1-38 |
|
stp transmit-limit |
15-MSTP Commands |
1-39 |
|
subvlan (multicast VLAN view) |
21-Multicast Commands |
3-4 |
|
super |
32-System Configuration and Debugging Command |
1-20 |
|
super password |
32-System Configuration and Debugging Command |
1-21 |
|
sysname |
32-System Configuration and Debugging Command |
1-22 |
|
system-failure |
32-System Configuration and Debugging Command |
2-20 |
|
system-view |
32-System Configuration and Debugging Command |
1-23 |
|
|
|
|
|
tcp timer fin-timeout |
17-IP Addressing-IP Performance Optimization Commands |
2-17 |
|
tcp timer syn-timeout |
17-IP Addressing-IP Performance Optimization Commands |
2-17 |
|
tcp window |
17-IP Addressing-IP Performance Optimization Commands |
2-18 |
|
telnet |
02-Login Commands |
1-15 |
|
terminal debugging |
29-Information Center Commands |
1-25 |
|
terminal logging |
29-Information Center Commands |
1-26 |
|
terminal monitor |
29-Information Center Commands |
1-26 |
|
terminal trapping |
29-Information Center Commands |
1-27 |
|
tftp |
31-File System Management Commands |
3-2 |
|
tftp client source |
31-File System Management Commands |
3-3 |
|
tftp-server acl |
31-File System Management Commands |
3-1 |
|
timer |
16-RRPP Commands |
1-12 |
|
timer monitor |
10-Extended OAM Commands |
2-21 |
|
timer quiet (HWTACACS scheme view) |
24-AAA Commands |
3-15 |
|
timer quiet (RADIUS scheme view) |
24-AAA Commands |
2-25 |
|
timer realtime-accounting (HWTACACS scheme view) |
24-AAA Commands |
3-15 |
|
timer realtime-accounting (RADIUS scheme view) |
24-AAA Commands |
2-26 |
|
timer response-timeout (HWTACACS scheme view) |
24-AAA Commands |
3-16 |
|
timer response-timeout (RADIUS scheme view) |
24-AAA Commands |
2-27 |
|
timer sample |
10-Extended OAM Commands |
2-21 |
|
time-range |
22-ACL Commands |
1-3 |
|
tracert |
32-System Configuration and Debugging Command |
3-4 |
|
traffic behavior |
23-QoS Commands |
2-17 |
|
traffic classifier |
23-QoS Commands |
2-6 |
|
|
|
|
|
undelete |
31-File System Management Commands |
1-12 |
|
uni auto-negotiation |
03-Port Commands |
1-33 |
|
uni classification-marking |
23-QoS Commands |
4-6 |
|
uni description |
03-Port Commands |
1-34 |
|
uni duplex |
03-Port Commands |
1-34 |
|
uni flow-control |
03-Port Commands |
1-35 |
|
uni igmp-snooping fast-leave |
21-Multicast Commands |
1-6 |
|
uni mdi |
03-Port Commands |
1-36 |
|
uni mirroring-port |
07-Port Mirroring Commands |
1-8 |
|
uni monitor-port |
07-Port Mirroring Commands |
1-9 |
|
uni multicast vlan |
21-Multicast Commands |
1-7 |
|
uni multicast-control |
21-Multicast Commands |
1-8 |
|
uni multicast-group-number |
21-Multicast Commands |
1-9 |
|
uni multicast-strip-tag |
21-Multicast Commands |
1-10 |
|
uni port-isolate |
06-Port Isolation Commands |
1-4 |
|
uni port-policy |
23-QoS Commands |
1-3 |
|
uni restart auto-negotiation |
03-Port Commands |
1-37 |
|
uni shutdown |
03-Port Commands |
1-37 |
|
uni speed |
03-Port Commands |
1-38 |
|
uni virtual-cable-test |
03-Port Commands |
1-39 |
|
uni vlan-mode tag pvid |
11-VLAN Commands |
1-18 |
|
uni vlan-mode translation pvid |
11-VLAN Commands |
1-19 |
|
uni vlan-mode transparent |
11-VLAN Commands |
1-20 |
|
unicast-suppression |
03-Port Commands |
1-31 |
|
update onu |
32-System Configuration and Debugging Command |
2-21 |
|
update onu onu-type |
32-System Configuration and Debugging Command |
2-22 |
|
upstream-sla |
01-EPON-OLT Command |
2-12 |
|
user |
31-File System Management Commands |
2-25 |
|
user privilege level |
02-Login Commands |
1-16 |
|
user-group |
24-AAA Commands |
1-32 |
|
user-interface |
02-Login Commands |
1-15 |
|
user-name-format (HWTACACS scheme view) |
24-AAA Commands |
3-17 |
|
user-name-format (RADIUS scheme view) |
24-AAA Commands |
2-27 |
|
using onu |
03-Port Commands |
1-40 |
|
|
|
|
|
verbose |
31-File System Management Commands |
2-25 |
|
vlan |
11-VLAN Commands |
1-8 |
|
vlan-mapping modulo |
15-MSTP Commands |
1-40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
