About the WA Series Access Points Command References

HomeSupportResource CenterWLANAccess PointH3C WA2600 Series WLAN Access PointsTechnical DocumentsCommandCommand ReferencesH3C WA Series Access Points Command Reference-6W104About the WA Series Access Points Command References
Download Book

About the H3C WA Series Access Points Command References

The H3C WA command references are part of the H3C WA documentation set. They describe the commands and command syntax options available for the H3C WA series access points. The H3C WA documentation set includes eight command references:

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up a WA series access point, and performing file management, configuration file management, software upgrade, and device management. This command reference includes:

·       CLI

·       Logging In to the Device

·       FTP and TFTP

·       File Management

·       Configuration File Management

·       Software Upgrade

·       Device Management

WLAN Command Reference

Covers the commands for configuring WLAN services, WLAN security, WLAN RRM, WLAN QoS, WLAN IDS, and WDS. This command reference includes:

·       WLAN Interface

·       WLAN Service

·       WLAN Security

·       WLAN RRM

·       WLAN IDS

·       WLAN QoS

·       WDS

·       WLAN Optimization

·       Advanced WLAN commands

Layer 2 Command Reference

Covers the commands for configuring Ethernet interface, loopback and null interfaces, MAC address table, spanning tree, loopback detection, VLAN, Layer 2 forwarding, and PPP. This command reference includes:

·       Ethernet Interface

·       Loopback and Null Interface

·       MAC Address Table

·       Spanning Tree

·       Loopback Detection

·       VLAN

·       Layer 2 Forwarding

·       PPP

Layer 3 Command Reference

Covers the commands for configuring and managing IP routing basics, IPv4 and IPv6 static routing, IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·       IP Routing Basics

·       IPv6 Static Routing

·       IPv6 Static Routing

·       IP Addressing

·       IPv6 Basics

·       DHCP

·       DHCPv6

·       DNS

·       IPv6 DNS

·       IP Performance Optimization

·       ARP

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocol IGMP snooping, and Layer 2 IPv6 multicast protocol MLD snooping. This command reference includes:

·       IGMP Snooping

·       MLD Snooping

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·       ACL

·       QoS

Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and port security), secure management (SSH), and SSL. This command reference includes:

·       AAA

·       802.1X

·       MAC Authentication

·       Port Security

·       Public Key

·       PKI

·       SSH2.0

·       SSL

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, display system information, and use the ping and tracert commands to check and debug network connectivity. This command reference includes:

·       System Maintenance and Debugging

·       NTP

·       SNMP

·       CWMP (TR069)

·       Information Center

 

Applicable models and software versions

The H3C WA series access points include the WA2600 series, and WA3600 series. This document describes the software features for only fat APs. Table 1 shows the applicable models and software versions.

Table 1 Applicable models and software versions

Series

Model

WA2600 series

WA2600 series access points (indoors)

WA2610-AGN

WA2612-AGN

WA2620-AGN

WA2610i-GN

WA2620i-AGN

WA2600 series access points (enhanced)

WA2610E-AGN

WA2620E-AGN

WA2600 series access points (outdoors)

WA2620X-AGNP

WA3600 series

WA3600 series access points (indoors)

WA3610i-GN

WA3620i-AGN

WA3628i-AGN

 

Command matrix

Table 2 Command matrix

Document

Module

Command

WA2600 series

WA3600 series

Fundamentals Command Reference

Software upgrade

boot-loader file file-url [ main | backup ]

The WA2610i-GN and WA2620i-AGN support the main and backup keywords in the boot-loader command.

The names of the main and backup system software image files must be wa2600a_fat.bin and wa2600a_fat.bak, respectively.

The main and backup keywords in the boot-loader command are supported.

The names of the main and backup system software image files must be wa3600_fat.bin and wa3600_fat.bak, respectively.

WLAN Command Reference

WLAN service

radio-type

The dot11a and dot11an keywords are not supported on the WA2610i-GN.

The dot11a and dot11an keywords are not supported on the WA3610i-GN.

shut-all-led enable

Supported on the WA2620-AGN, WA2610i-GN, and WA2620i-AGN.

Supported.

fast-association enable

Available on APs supporting both 2.4 GHz and 5 GHz radios.

Available on APs supporting both 2.4 GHz and 5 GHz radios.

WLAN RRM

Band navigation commands

Available on APs supporting both 2.4 GHz and 5 GHz radios.

Available on APs supporting both 2.4 GHz and 5 GHz radios.

WLAN optimization

wlan option fair-schedule enable

Supported on the WA2610-AGN, WA2612-AGN, WA2610E-AGN, WA2620E-AGN, and WA2620X-AGNP.

Not supported.

wlan option traffic-shaping enable

Supported on the WA2610-AGN, WA2612-AGN, WA2610E-AGN, WA2620E-AGN, and WA2620X-AGNP.

Not supported.

wlan option green-ap enable

Supported on the WA2610i-GN and WA2620i-AGN.

Supported.

wlan option multi-service enable

Supported on the WA2610-AGN.

Not supported.

wlan option power-supply

Not supported.

Supported on the WA3620i-AGN and WA3628i-AGN.

wlan option rx-broadcast-all enable

Supported on the WA2610i-GN and WA2620i-AGN.

Supported.

Layer 2 Command Reference

Ethernet interface

display interface

In the output, the aborts field does not contain the Jabber frames option, and the giants field contains the Jabber frames option on the WA2610i-GN and WA2620i-AGN.

The aborts field in the output contains the Jabber frames option on the other models.

The aborts field in the output contains the Jabber frames option.

PPP

pppoe-client

The [ no-hostuniq ] [ diagnose [ interval seconds ] | idle-timeout seconds [ queue-length packets ] options are not supported on the WA2610i-GN and WA2620i-AGN.

Supported.

ACL and QoS Command Reference

QoS commands

qos trust

The dot1p and dscp keywords are supported on GigabitEthernet interfaces.

The dot11e and dscp keywords are supported on WLAN-BSS interfaces.

The dot1p and dscp keywords are supported on GigabitEthernet interfaces.

The dot11e and dscp keywords are supported on WLAN-BSS interfaces.