About the H3C WA Command References

HomeSupportResource CenterWLANAccess PointH3C WA2200 Series WLAN Access PointsTechnical DocumentsCommandCommand ReferencesH3C WA Series WLAN Access Points Command Reference-6W100About the H3C WA Command References
Download Book

About the H3C WA Command References

The H3C WA command references are part of the H3C WA documentation set. They describe the commands and command syntax options available for the H3C WA Series WLAN Access Points. The H3C WA documentation set includes 10 command references:

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up a WA series access point. This command reference includes:

l      CLI

l      Logging In to the AP

l      Controlling Login Users

l      File Management

l      FTP and TFTP

l      Device Management

l      Basic System Configuration

l      HTTP

WLAN Command Reference

Covers the commands for configuring WLAN services, WLAN security, WLAN RRM, WLAN QoS, WLAN IDS, and WDS. This command reference includes:

l      WLAN Interface

l      WLAN Service

l      WLAN Security

l      WLAN RRM

l      WLAN IDS

l      WLAN QoS

l      WDS

Layer 2 – LAN Switching Command Reference

Covers Layer 2 technologies and features used on a LAN switched network, such as Ethernet interface, loopback and null interfaces, VLAN technology, MAC address table management, and MSTP. This command reference includes:

l      Ethernet Interface

l      Loopback and Null Interfaces

l      VLAN

l      MAC Address Table

l      MSTP

Layer 2 – WAN Command Reference

Covers WAN access technologies such as PPP and PPPoE. This command reference includes:

l      PPP

Layer 3 – IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

l      ARP

l      IP Addressing

l      DHCP

l      DNS

l      IP Performance Optimization

l      IPv6 Basics

l      DHCPv6

Layer 3 – IP Routing Command Reference

Describes the commands for configuring static routing. This command reference includes:

l      IP Routing Basics

l      IPv6 Static Routing

l      IPv6 Static Routing

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocol IGMP snooping, and Layer 2 IPv6 multicast protocol MLD snooping. This command reference includes:

l      IGMP Snooping

l      MLD Snooping

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

l      ACL

l      QoS

Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and port security), secure management (SSH), and SSL. This command reference includes:

l      AAA

l      802.1X

l      MAC Authentication

l      Port Security

l      Public Key

l      PKI

l      SSH2.0

l      SSL

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, display system information, and use the ping and tracert commands to check and debug network connectivity. This command reference includes:

l      System Maintenance and Debugging

l      NTP

l      SNMP

l      CWMP

l      Information Center