00-About the S7500E Command References

HomeSupportSwitchesH3C S7500E Switch SeriesReference GuidesCommand ReferencesH3C S7500E Switch Series Command References-Release755X-6W10000-About the S7500E Command References
Download Book

About the H3C S7500E command references

The H3C S7500E command references describe the commands and command syntax options available for the H3C S7500E Switch Series.

 

Command Reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the switch. This command reference includes:

·     CLI

·     RBAC

·     Login management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Emergency shell commands

·     Device management

·     Tcl

·     Python

·     License management

Virtual Technologies Command Reference

Covers configuration commands for the H3C proprietary virtual technologies IRF and MDC. This command reference includes:

·     IRF

·     MDC

Interface Command Reference

Covers the interface configuration commands. This command reference includes:

·     Bulk interface

·     Ethernet interface

·     Loopback, null, and inloopback interface

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC address table

·     Ethernet link aggregation

·     Port isolation

·     VLAN

·     MVRP

·     QinQ

·     VLAN mapping

·     Loop detection

·     Spanning tree

·     LLDP

·     L2PT

·     Service loopback group

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP

·     IP addressing

·     DHCP

·     DNS

·     IP forwarding basics

·     Fast forwarding

·     Adjacency table

·     IRDP

·     IP performance optimization

·     UDP helper

·     IPv6 basics

·     DHCPv6

·     IPv6 fast forwarding

·     Tunneling

·     GRE

·     HTTP redirect

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy-based routing. This command reference includes:

·     Basic IP routing

·     Static routing

·     RIP

·     OSPF

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     OSPFv3

·     IPv6 IS-IS

·     IPv6 policy-based routing

·     Routing policy

·     DCN

IP Multicast Command Reference

Covers the commands for Layer 3 IPv4 multicast protocols (IGMP, PIM, and MSDP), Layer 3 IPv6 multicast protocols (MLD and IPv6 PIM,), Layer 2 IPv4 multicast protocols (IGMP snooping, PIM snooping, and multicast VLAN), and Layer 2 IPv6 multicast protocols (MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN). This command reference includes:

·     IGMP snooping

·     PIM snooping

·     Multicast VLAN

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     MSDP

·     Multicast VPN

·     MLD Snooping

·     IPv6 PIM snooping

·     IPv6 multicast VLAN

·     IPv6 multicast routing and forwarding

·     MLD

·     IPv6 PIM

MPLS Command Reference

Covers the commands for configuring MPLS and its extended functions. This command reference includes:

·     Basic MPLS

·     Static LSP

·     LDP

·     MPLS TE

·     Static CRLSP

·     RSVP

·     Tunnel policy

·     MPLS L3VPN

·     MPLS L2VPN

·     VPLS

·     MPLS OAM

·     MCE

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS

·     Time range

Security Command Reference

Covers security feature commands. Available security features include identity authentication, access security, secure management, and attack protection. This command reference includes:

·     AAA

·     802.1X

·     MAC authentication

·     Portal

·     Port security

·     Password control

·     Keychain

·     Public key management

·     PKI

·     IPsec

·     SSH

·     SSL

·     Attack detection and prevention

·     TCP attack prevention

·     IP source guard

·     ARP attack protection

·     ND attack defense

·     uRPF

·     MFF

·     FIPS

·     MACsec

·     802.1X client

·     Web authentication

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Ethernet OAM

·     CFD

·     DLDP

·     RRPP

·     ERPS

·     Smart Link

·     Monitor Link

·     VRRP

·     Reth interface and redundancy group

·     BFD

·     Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, assess network performance, synchronize time among network devices, and test network connectivity. This command reference includes:

·     System maintenance and debugging

·     NQA

·     NTP

·     PoE

·     SNMP

·     RMON

·     NETCONF

·     EAA

·     Process monitoring and maintenance

·     Sampler

·     Mirroring

·     NetStream

·     IPv6 NetStream

·     sFlow

·     Information center

·     GOLD

·     Packet capture

·     VCF fabric

·     CWMP

OAA Command Reference

Covers OAA configuration commands. This command reference includes:

·     OAP module

·     OAP

EVI Command Reference

Covers EVI configuration commands.

OpenFlow Command Reference

Covers OpenFlow configuration commands.

VXLAN Command Reference

Covers VXLAN configuration commands.

EVPN Command Reference

Covers EVPN configuration commands.

EPON Command Reference

Covers EPON configuration commands.

WLAN  Command Reference

Covers WLAN configuration commands.This guide includes:

·     AP management

·     Radio management

·     WLAN access

·     WLAN security

·     WLAN authentication

·     WLAN QoS

·     WLAN roaming

·     WLAN load balancing

·     WLAN radio resource measurement

·     Channel scanning

·     Band navigation

·     WLAN high availability

·     802.11r

·     Wireless location

·     WLAN RRM

·     WLAN IP snooping

·     WLAN forwarding

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网