Title | Size | Downloads |
---|---|---|
03-Layer 2 - LAN Switching Command Reference-book.pdf | 1.69 MB |
- Table of Contents
Preface
The H
The Layer 2 – LAN Switching Command Reference describes LAN switching configuration commands. It covers commands for implementing flow control and load balancing, isolating users in the same VLAN, eliminating Layer 2 loops, dividing VLANs, transmitting customer network frames through the public network, modifying VLAN tags of packets, remote managing the ONU device, and so on.
This preface includes:
l Audience
l About the H3C S7500E Documentation Set
Audience
This documentation is intended for:
l Network planners
l Field technical support and servicing engineers
l Network administrators working with the S7500E series
Document Organization
The Layer 2 – LAN Switching Command Reference comprises these parts:
Ethernet Interface Configuration Commands |
OLT Configuration Commands |
ONU Remote Management Configuration Commands |
Alarm Configuration Commands |
Switch Feature-Related Configuration Commands |
Loopback Interface and Null Interface Configuration Commands |
MAC Address Table Configuration Commands |
MAC Information Configuration Commands |
Port Isolation Configuration Commands |
MSTP Configuration Commands |
BPDU Tunneling Configuration Commands |
|
VLAN Configuration Commands |
Super VLAN Configuration Commands |
Isolate-User-VLAN Configuration Commands |
Voice VLAN Configuration Commands |
GVRP Configuration Commands |
QinQ Configuration Commands |
VLAN Mapping Configuration Commands |
LLDP Configuration Commands |
Service Loopback Group Configuration Commands |
|
|
|
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention |
Description |
Boldface |
Bold text represents commands and keywords that you enter literally as shown. |
italic |
Italic text represents arguments that you replace with actual values. |
[ ] |
Square brackets enclose syntax choices (keywords or arguments) that are optional. |
{ x | y | ... } |
Braces enclose a set of required syntax choices separated by vertical bars, from which you select one. |
[ x | y | ... ] |
Square brackets enclose a set of optional syntax choices separated by vertical bars, from which you select one or none. |
{ x | y | ... } * |
Asterisk marked braces enclose a set of required syntax choices separated by vertical bars, from which you select at least one. |
[ x | y | ... ] * |
Asterisk marked square brackets enclose optional syntax choices separated by vertical bars, from which you may select multiple choices or none. |
&<1-n> |
The argument or keyword and argument combination before the ampersand (&) sign can be entered 1 to n times. |
# |
A line that starts with a pound (#) sign is comments. |
Symbols
Convention |
Description |
|
Means reader be extremely careful. Improper operation may cause bodily injury. |
|
Means reader be careful. Improper operation may cause data loss or damage to equipment. |
|
Means a complementary description. |
About the H3C S7500E Documentation Set
The H
Category |
Documents |
Purposes |
|
Product description and specifications |
Describe product specifications and benefits. |
||
Provide an in-depth description of software features and technologies. |
|||
Describe card specifications, features, and standards. |
|||
Hardware installation |
Provides a complete guide to hardware installation and hardware specifications. |
||
Guides you through installing and remodeling
H |
|||
H3C Pluggable SFP [SFP+][XFP] Transceiver Modules Installation Guide |
Guides you through installing SFP/SFP+/XFP transceiver modules. |
||
H3C Mid-Range Series Ethernet Switches Pluggable Modules Manual |
Describes the hot-swappable modules available for the Mid-Range Series Ethernet Switches, their external views, and specifications. |
||
Describes how to install the DIMM (LSBM1POEDIMMH) for PoE master and slave power management. |
|||
Describes how to install the 24-port DIMM (LSQM1POEDIMMS0) for PoE power management. |
|||
Software configuration |
Describe software features and configuration procedures. |
||
Provide a quick reference to all available commands. |
|||
Describe typical network scenarios and provide configuration examples and instructions. |
|||
Operations and maintenance |
Provide information about the product release, including the version history, hardware and software compatibility matrix, version upgrade information, technical support information, and software upgrading. |
||
Power configuration |
Describes the appearance, specifications,
LEDs, and installation and removal of the H |
||
Describes the appearance, specifications,
LEDs, and installation and removal of the H |
|||
Describes the appearance, specifications,
LEDs, and installation and removal of the H |
|||
Describes the appearance, specifications,
LEDs, and installation and removal of the H |
|||
Describes the appearance, specifications,
LEDs, and installation and removal of the H |
|||
Describes the functions and appearance of
the H |
|||
Guides you to select power modules in various cases. |
|||
Optional cards |
The S7500E series Ethernet switches support various card models. Each model is provided with a card manual that describes: l The type, number, and transmission rate of interfaces l Applicable switches of the card l Required software version l Pluggable modules supported by the card |
||
|
|
|
|
Obtaining Documentation
You can access the most up-to-date H
Click the links on the top navigation bar to obtain different categories of product documentation:
[Technical Support & Documents > Technical Documents] – Provides hardware installation, and software feature configuration and maintenance documentation.
[Products & Solutions] – Provides information about products and technologies, as well as solutions.
[Technical Support & Documents > Software Download] – Provides the documentation released with the software version.
Documentation Feedback
You can e-mail your comments about product
documentation to info@h
We appreciate your comments.