Title | Size | Downloads |
---|---|---|
book.pdf | 5.28 MB |
- Table of Contents
Manual Version
20071025-C-1.01
Product Version
Release 6000
Organization
H
Part |
Contents |
1 Login |
Introduces the commands used for logging into the Ethernet switch. |
2 VLAN |
Introduces the commands used for configuring VLAN, Voice VLAN, and GVRP. |
3 IP Addressing and Performance |
Introduces the commands used for configuring IP address and IP performance. |
4 QinQ-BPDU Tunneling |
Introduces the commands used for configuring QinQ and BPDU Tunneling. |
5 Port Correlation Configuration |
Introduces the commands used for basic port configuration and port isolation configuration. |
6 Link Aggregation |
Introduces the commands used for link aggregation. |
7 MAC Address Table Management |
Introduces the commands used for configuring MAC address forwarding table. |
8 IP Source Guard |
Introduces the commands used for configuring MAC address, IP address and port binding. |
9 MSTP |
Introduces the commands used for configuring STP and BRDU tunnel. |
10 IP Routing Overview |
Introduces the commands used for displaying IP routing tables. |
11 IPv4 Routing |
Introduces the commands used for configuring IPv4 routing, static routing, RIP, OSPF, IS-IS, BGP, and route policy. |
12 IPv6 Routing |
Introduces the commands used for configuring IPv6 routing, static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+. |
13 IPv6 Configuration |
Introduces the commands used for configuring IPv6 application, IPv6 tunneling, and so on. |
14 Multicast |
Introduces the commands used for configuring IGMP Snooping, MLD Snooping, multicast VLAN, multicast policy, IGMP, PIM-DM, PIM-SM, and MSDP. |
15 802.1x-MAC Authentication |
Introduces the commands used for 802.1x and MAC address authentication related configurations. |
16 AAA RADIUS HWTACACS |
Introduces the commands used for AAA, RADIUS, HWTACACS, and the related configurations. |
17 Portal |
Introduces the commands used for portal. |
18 ARP |
Introduces the commands used for ARP and the related configuration. |
19 DHCP |
Introduces the commands used for DHCP and the related configuration. |
20 ACL |
Introduces the commands used for IPv4&IPv6-based ACL and the related configuration. |
21 QoS |
Introduces the commands used for QoS and the related configuration. |
22 Port Mirroring |
Introduces the commands used for port mirroring and the related configuration. |
23 SNMP-RMON |
Introduces the commands used for the configuration to manage network devices through SNMP and RMON. |
24 NTP |
Introduces the commands used for NTP and the related configuration. |
25 DNS |
Introduces the commands used for DNS and the related configuration. |
26 File System Management |
Introduces the commands used for file system management. |
27 Information Center |
Introduces the commands used for the configuration to analyze and diagnose networks using the information center. |
28 System Maintaining and Debugging |
Introduces the commands used for daily system maintenance and debugging. |
|
Introduces the commands used for VRRP, HA and the related configuration. |
30 SSH |
Introduces the commands used for SSH and the related configuration. |
31 PoE |
Introduces the commands used for PoE. |
32 RRPP |
Introduces the commands used for RRPP. |
33 Appendix |
Lists all the commands described in this command manual in an alphabetic order. The parts and pages where the commands are described are also given. |