Title | Size | Downloads |
---|---|---|
H3C LSQ1TGX2SC0 Card Manual-V1.03-book.pdf | 38.54 KB |
- Table of Contents
2-port 10 Gigabit XFP Fiber Interface Ethernet Card–LSQ1TGX2SC0
1 Card Identifier
The silkscreen LSQ1TGX2SC0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table1 LSQ1TGX2SC0 specifications
Item |
LSQ1TGX2SC0 |
Connector |
LC |
Port quantity |
Two 10GBASE-R-XFP Ethernet ports |
Interface transmission speed |
10 Gbps |
Type of XFP module |
See Table2. |
Applied to |
S7500E Series Ethernet switches |
Host software version |
Release 6100 and Later |
For supported XFP modules, refer to the following table.
Table2 Specifications of XFP modules
Optional XFP module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
XFP-SX-MM850 |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984 ft) |
XFP-LX-SM1310 |
1,310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6 miles) |
XFP-LH40-SM1550 |
1,550 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (25 miles) |
XFP-LH80-SM1550 |
1,550 nm |
LC |
9/125 μm single-mode optical fiber |
80 km (50 miles) |
3 Obtaining More Information
For module installation, see H3C S7500E Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download
Copyright © 2007-2017 New H3C Technologies Co., Ltd.