Title | Size | Downloads |
---|---|---|
H3C_LSQ1TGX1EA0_Card_Manual(V1.02)-book.pdf | 47.65 KB |
- Table of Contents
1-port 10 Gigabit XFP Fiber Interface Ethernet Card–LSQ1TGX1EA0
1 Card Identifier
The silkscreen LSQ1TGX1EA0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table 1 LSQ1TGX1EA0 specifications
Item |
LSQ1TGX1EA0 |
Connector |
LC |
Port quantity |
One 10GBASE-R-XFP Ethernet port |
Interface transmission speed |
10Gbps |
Type of XFP module |
See Table2. |
Applied to |
S7500E Series Ethernet switches |
Host software version |
Release 6100 and Later |
For supported XFP modules, refer to the following table.
Table 2 Specifications of XFP modules
Optional XFP module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
XFP-SX-MM850 |
850 nm |
LC |
50/125 µm multi-mode optical fiber |
300 m (984 ft) |
XFP-LX-SM1310 |
1,310 nm |
LC |
9/125 µm single-mode optical fiber |
10 km (6 miles) |
XFP-LH40-SM1550 |
1,550 nm |
LC |
9/125 µm single-mode optical fiber |
40 km (25 miles) |
XFP-LH80-SM1550 |
1,550 nm |
LC |
9/125 µm single-mode optical fiber |
80 km (50 miles) |
3 Obtaining More Information
If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.
For the introduction to card installation and host software upgrade, see the related Installation Manual.
Note: This card manual written in English is applicable for the territories except the mainland China (excluding Hong Kong SAR, Macao SAR, and Province of China).
Copyright © 2007-2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.