Title | Size | Downloads |
---|---|---|
H3C LSQ1PT8PSC0 Card Manual(V1.03)-book.pdf | 45.70 KB |
- Table of Contents
8-port 1000BASE-PX (EPON) + 8-port 1000BASE-X/100BASE-FX ports Interface Ethernet Cards –LSQ1PT8PSC0
1 Card Identifier
The silkscreen LSQ1PT8PSC0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table 1 LSQ1PT8PSC0 specifications
Item |
LSQ1PT8PSC0 |
Connector |
l SC l LC |
Port quantity |
l Eight 1000BASE-PX (EPON) ports l Eight 1000BASE-X/100BASE-FX ports |
Interface transmission speed |
l 1000BASE-PX (EPON) Interface: 1000Mbps(full duplex) l 1000BASE-X/100BASE-FX Interface:1000/100Mbps(full duplex) |
Type of hot-swappable module |
|
Applied to |
S7500E Series Ethernet switches |
Host software version |
Release 6300 and Later |
For hot-swappable modules available for 1000BASE-PX (EPON) interfaces, see the following table.
Table 2 1000BASE-PX-SFP (EPON) module specifications
Type |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
SFP-GE-PX10-D-SM1490-A |
1310nm (receive)/1490 (transfer) |
SC |
9 µm/125 µm single-mode optical fiber |
10 km (6.21 miles) |
SFP-GE-PX20-D-SM1490-A |
1310nm (receive)/1490 (transfer) |
SC |
9 µm/125 µm single-mode optical fiber |
20 km (12.42 miles) |
For hot-swappable modules available for 1000BASE-X/100BASE-FX interfaces, see the following table.
Table 3 1000BASE-X/100BASE-FX module specifications
Type |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 µm multi-mode fiber |
550 m (0.34 miles) |
62.5/125 µm multi-mode fiber |
275 m (0.17 miles) |
|||
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 µm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 µm single mode fiber |
40 km (24.86 miles) |
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 µm single mode fiber |
40 km (24.86 miles) |
SFP-GE-LH70-SM1550 |
1550 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 µm single mode fiber |
100 km (62.14 miles) |
SFP-GE-T |
— |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
SFP-GE-LX-SM1310-BIDI |
1490 nm (receive)/1310 nm (transmit) |
LC |
9/125 µm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LX-SM1490-BIDI |
1490 nm (transmit)/1310 nm (receive) |
LC |
9/125 µm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LH70-SM1470-CW |
1470 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1490-CW |
1490 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1510-CW |
1510 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1530-CW |
1530 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1550-CW |
1550 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1570-CW |
1570 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1590-CW |
1590 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1610-CW |
1610 nm |
LC |
9/125 µm single mode fiber |
70 km (43.50 miles) |
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
50/125µm multi-mode fiber |
2 km (1.24 miles) |
62.5/125µm multi-mode fiber |
||||
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125µm single mode fiber |
15 km (9.32 miles) |
SFP-FE-LH40-SM1310 |
1310 nm |
LC |
9/125µm single mode fiber |
40 km (24.86 miles) |
SFP-FE-LH80-SM1550 |
1550 nm |
LC |
9/125µm single mode fiber |
80 km (49.71 miles) |
SFP-FE-LX-SM1310-BIDI |
1550 nm (receive)/1310 nm (transmit) |
LC |
9/125µm single mode fiber |
15 km (9.32 miles) |
SFP-FE-LX-SM1550-BIDI |
1550 nm (transmit)/1310 nm (receive) |
LC |
9/125µm single mode fiber |
15 km (9.32 miles) |
l BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber.
l BIDI modules must be used in pair. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end.
3 Obtaining More Information
If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.
For the introduction to card installation and host software upgrade, see the related Installation Manual.
Note: This card manual written in English is applicable for the territories except the mainland China (excluding Hong Kong SAR, Macao SAR, and Province of China).
Copyright © 2008-2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.