Title | Size | Downloads |
---|---|---|
H3C LSQ1GV24PSA0 Card Manual-V1.01-book.pdf | 29.98 KB |
- Table of Contents
20-port 10/100/1000Base-T + 4-port Combo Ethernet Card–LSQ1GV24PSA0
1 Card Identifier
The silkscreen LSQ1GV24PSA0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table1 LSQ1GV24PSA0 specifications
Item |
LSQ1GV24PSA0 |
Connector |
l LC l RJ-45 |
Port quantity |
l Twenty 10/100/1000Base-T Gigabit Ethernet ports l Four Combo ports (Each composed of a 10/100/1000Base-T Gigabit Ethernet port and an SFP port, which cannot be simultaneously used; for Combo port mapping relations, refer to Table2) |
Interface transmission speed |
l 10/100/1000Base-T Gigabit Ethernet ports:10/100/1000 Mbps (half/full duplex) l 1000Base-X-SFP Ethernet ports :1000 Mbps |
Cable and maximum transmission distance |
l 1000Base-X-SFP Ethernet ports: See Table3. |
Optional module supported by the card |
24-Port DIMM for PoE Power Management (LSQM1POEDIMMS0) This module enables the card to support PoE power supply for 24 ports. |
Applied to |
S7500E Series Ethernet switches |
Host software version |
Release 6613 and Later |
For Combo ports mapping relations, refer to the following table.
Table2 Combo ports mapping relations
1000Base-X-SFP Ethernet port |
10/100/1000Base-T Gigabit Ethernet port |
1 |
5 |
2 |
6 |
3 |
7 |
4 |
8 |
The GE SFP port and the 10/100/1000Base-T port of a Combo port cannot be used simultaneously.
For supported hot-swappable modules of 1000Base-X-SFP Ethernet ports, refer to the following table.
Table3 SFP module specifications
Type |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode fiber |
550 m (0.34 miles) |
62.5/125 μm multi-mode fiber |
275 m (0.17 miles) |
|||
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single mode fiber |
40 km (24.86 miles) |
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
40 km (24.86 miles) |
SFP-GE-LH70-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
100 km (62.14 miles) |
SFP-GE-LX-SM1310-BIDI |
1490 nm (receive)/1310 nm (transmit) |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LX-SM1490-BIDI |
1490 nm (transmit)/1310 nm (receive) |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LH70-SM1470-CW |
1470 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1490-CW |
1490 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1510-CW |
1510 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1530-CW |
1530 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1550-CW |
1550 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1570-CW |
1570 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1590-CW |
1590 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1610-CW |
1610 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
l BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber.
l BIDI modules must be used in pair. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end.
3 Obtaining More Information
For module installation, see H3C S7500E Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download
Copyright © 2010-2017 New H3C Technologies Co., Ltd.