Login
| Title | Size | Downloads |
|---|---|---|
| H3C LSQ1GP24TSC0 Card Manual-V1.03-book.pdf | 30.31 KB |
- Table of Contents
16-port 1000BASE-X/100BASE-FX +8-port Combo Ethernet Card–LSQ1GP24TSC0
1 Card Identifier
The silkscreen LSQ1GP24TSC0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table1 LSQ1GP24TSC0 specifications
|
Item |
LSQ1GP24TSC0 |
|
Connector |
l LC l RJ-45 |
|
Port quantity |
l Sixteen 1000Base-X-SFP/100Base-FX-SFP Ethernet ports l Eight Combo ports (Each composed of a 10/100/1000Base-T Gigabit Ethernet port and an SFP port, which cannot be simultaneously used; for Combo port mapping relations, refer to Table2) |
|
Interface transmission speed |
l 1000Base-X-SFP/100Base-FX-SFP Ethernet ports : 1000/100 Mbps l 10/100/1000Base-T Gigabit Ethernet ports:10/100/1000 Mbps (half/full duplex) |
|
Cable and maximum transmission distance |
l 1000Base-X-SFP/100Base-FX-SFP Ethernet ports: See Table3. l 10/100/1000Base-T Gigabit Ethernet ports:Category-5 twisted pair; maximum transmission distance: 100 m (328 ft) |
|
Applied to |
S7500E Series Ethernet switches |
|
Host software version |
Release 6300 and Later |
For Combo ports mapping relations, refer to the following table.
Table2 Combo ports mapping relations
|
1000Base-X-SFP/100Base-FX-SFP Ethernet port |
10/100/1000Base-T Gigabit Ethernet port |
|
17 |
25 |
|
18 |
26 |
|
19 |
27 |
|
20 |
28 |
|
21 |
29 |
|
22 |
30 |
|
23 |
31 |
|
24 |
32 |
l The 1000Base-X-SFP/100Base-FX-SFP port and the 10/100/1000Base-T port of a Combo port cannot be used simultaneously.
l The 1000Base-X-SFP/100Base-FX-SFP port of a Combo port does not support the SFP-GE-T module.
For supported hot-swappable modules of 1000Base-X-SFP/100Base-FX-SFP Ethernet ports, refer to the following table.
Table3 SFP module specifications
|
Type |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode fiber |
550 m (0.34 miles) |
|
62.5/125 μm multi-mode fiber |
275 m (0.17 miles) |
|||
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single mode fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
40 km (24.86 miles) |
|
SFP-GE-LH70-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
100 km (62.14 miles) |
|
SFP-GE-T |
— |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
|
SFP-GE-LX-SM1310-BIDI |
1490 nm (receive)/1310 nm (transmit) |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
|
SFP-GE-LX-SM1490-BIDI |
1490 nm (transmit)/1310 nm (receive) |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
|
SFP-GE-LH70-SM1470-CW |
1470 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1490-CW |
1490 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1510-CW |
1510 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1530-CW |
1530 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1550-CW |
1550 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1570-CW |
1570 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1590-CW |
1590 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-GE-LH70-SM1610-CW |
1610 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
|
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
50/125μm multi-mode fiber |
2 km (1.24 miles) |
|
62.5/125μm multi-mode fiber |
||||
|
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
|
SFP-FE-LH40-SM1310 |
1310 nm |
LC |
9/125μm single mode fiber |
40 km (24.86 miles) |
|
SFP-FE-LH80-SM1550 |
1550 nm |
LC |
9/125μm single mode fiber |
80 km (49.71 miles) |
|
SFP-FE-LX-SM1310-BIDI |
1550 nm (receive)/1310 nm (transmit) |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
|
SFP-FE-LX-SM1550-BIDI |
1550 nm (transmit)/1310 nm (receive) |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
l BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber.
l BIDI modules must be used in pair. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end.
3 Obtaining More Information
For module installation, see H3C S7500E Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download
Copyright © 2008-2017 New H3C Technologies Co., Ltd.
