Title | Size | Downloads |
---|---|---|
H3C LSQ1FV48SA0 Card Manual(V1.04)-book.pdf | 21.31 KB |
- Table of Contents
48-port 10/100Base-T Ethernet Card–LSQ1FV48SA0
1 Card Identifier
The silkscreen LSQ1FV48SA0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table 1 LSQ1FV48SA0 specifications
Item |
LSQ1FV48SA0 |
Connector |
RJ-45 |
Port quantity |
Forty-eight 10/100Base-T Ethernet ports |
Interface transmission speed |
10/100 Mbps (half/full duplex) |
Cable and maximum transmission distance |
Category-5 twisted pair; maximum transmission distance: 100 m (328 ft) |
Optional module supported by the card |
DIMM for PoE Master and Slave Power Management (LSBM1POEDIMMH) This module enables the card to support PoE power supply for 48 ports. |
Applied to |
S7500E Series Ethernet switches |
Host software version |
Release 6100 and Later |
3 Obtaining More Information
If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.
For the introduction of card installation and host software upgrade, see the related Installation Manual.
Note: This card manual written in English is applicable for the territories except the mainland China (excluding Hong Kong SAR, Macao SAR, and Province of China).
Copyright © 2007-2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.