Login
| Title | Size | Downloads |
|---|---|---|
| H3C LSQ1FP48SA0 Card Manual(V1.03)-book.pdf | 39.84 KB |
- Table of Contents
48-port 100 MB Fiber Interface Ethernet Card–LSQ1FP48SA0
1 Card Identifier
The silkscreen LSQ1FP48SA0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table1 LSQ1FP48SA0 specifications
|
Item |
LSQ1FP48SA0 |
|
Connector |
LC |
|
Port quantity |
Forty-eight 100M SFP Ethernet ports |
|
Interface transmission speed |
100 Mbps (full duplex) |
|
Type of SFP module |
See Table2. |
|
Applied to |
S7500E Series Ethernet switches |
|
Host software version |
Release 6100 and Later |
For supported SFP modules, refer to the following table.
Table2 Specifications for LSQ1FP48SA0 interface transceiver and cable
|
Type |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
50/125µm multi-mode fiber |
2 km (1.24 miles) |
|
62.5/125µm multi-mode fiber |
||||
|
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125µm single mode fiber |
15 km (9.32 miles) |
|
SFP-FE-LH40-SM1310 |
1310 nm |
LC |
9/125µm single mode fiber |
40 km (24.86 miles) |
|
SFP-FE-LH80-SM1550 |
1550 nm |
LC |
9/125µm single mode fiber |
80 km (49.71 miles) |
|
SFP-FE-LX-SM1310-BIDI |
1550 nm (receive)/1310 nm (transmit) |
LC |
9/125µm single mode fiber |
15 km (9.32 miles) |
|
SFP-FE-LX-SM1550-BIDI |
1550 nm (transmit)/1310 nm (receive) |
LC |
9/125µm single mode fiber |
15 km (9.32 miles) |
l BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber.
l BIDI modules must be used in pair. For example, if an SFP-FE-LX-SM1310-BIDI is used at one end, an SFP-FE-LX-SM1550-BIDI must be used at the other end.
3 Obtaining More Information
If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.
For the introduction of card installation and host software upgrade, see the related Installation Manual.
Note: This card manual written in English is applicable for the territories except the mainland China (excluding Hong Kong SAR, Macao SAR, and Province of China).
Copyright © 2007-2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
