Login
| Title | Size | Downloads |
|---|---|---|
| H3C S7500E LSQ1CGP24TSC0 Card Manual-V1.03-book.pdf | 31.45 KB |
- Table of Contents
Service Processing Engine for S7503E-S only–LSQ1CGP24TSC0
BOM: 3123A12U
1 Card Identifier
The silkscreen LSQ1CGP24TSC0 is printed at the upper left corner of the front panel, and is used to identify the card.
2 Specifications
Table1 LSQ1CGP24TSC0 specifications
|
Item |
LSQ1CGP24TSC0 |
|
Connector |
l LC l RJ-45 |
|
Port quantity |
l One Console port : Support local/remote dialup configuration management of the switch l One 10/100BASE-TX interface for management l Sixteen 1000Base-X-SFP/100Base-FX-SFP Ethernet ports l Eight Combo ports (Each composed of a 10/100/1000Base-T Gigabit Ethernet port and an SFP port, which cannot be simultaneously used; for Combo port mapping relations, refer to Table2 ) |
|
Interface transmission speed |
l Console port: ￡ 115,200 bps (default: 9,600 bps) l 10Base-T/100Base-TX interface: 10/100 Mbps (half/full duplex) l 1000Base-X-SFP/100Base-FX-SFP Ethernet ports :1000/100 Mbps l 10/100/1000Base-T Gigabit Ethernet ports:10/100/1000 Mbps (half/full duplex) |
|
Cable and maximum transmission distance |
l 10Base-T/100Base-TX interface: Category-5 twisted pair; maximum transmission distance: 100 m (328 ft.) l 1000Base-X-SFP/100Base-FX-SFP Ethernet ports: SeeTable3 . l 10/100/1000Base-T Gigabit Ethernet ports: Category-5 twisted pair; maximum transmission distance: 100 m (328 ft.) |
|
Applied to |
S7503E-S Ethernet switch |
|
Host software version |
Release 6300 and Later |
For Combo ports mapping relations, refer to the following table.
Table2 Combo ports mapping relations
|
1000Base-X-SFP/100Base-FX-SFP Ethernet port |
10/100/1000Base-T Gigabit Ethernet port |
|
17 |
25 |
|
18 |
26 |
|
19 |
27 |
|
20 |
28 |
|
21 |
29 |
|
22 |
30 |
|
23 |
31 |
|
24 |
32 |
& Note:
The GE/FE SFP port and the 10/100/1000Base-T port of a Combo port cannot be used simultaneously.
For supported hot-swappable modules of 1000Base-X-SFP/100Base-FX-SFP Ethernet ports, refer to the following table.
Table3 SFP module specifications
|
Name of hot-swappable module |
Central wavelength |
Connector type |
Interface fiber specifications |
Maximum transmission distance |
|
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (0.34 miles) |
|
62.5/125 μm multi-mode optical fiber |
275 m (0.17 miles) |
|||
|
SFP-GE-LX-SM1310-A |
1,310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6 miles) |
|
SFP-GE-LH40-SM1310 |
1,310 nm |
LC |
9/125 μm single-mode optical fiber |
30 km (18.6 miles) |
|
SFP-GE-LH40-SM1550 |
1,550 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (25 miles) |
|
SFP-GE-LH70-SM1550 |
1,550 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH100-SM1550 |
1,550 nm |
LC |
9/125 μm single-mode optical fiber |
100 km (60 miles) |
|
SFP-GE-T |
— |
RJ45 |
Category-5 twisted pair |
100 m (0.06 miles) |
|
SFP-GE-LX-SM1310-BIDI |
1,490 (receive)/1,310 nm (transmit) |
LC |
9/125 μm single-mode optical fiber |
10 km (6 miles) |
|
SFP-GE-LX-SM1490-BIDI |
1,490 (transmit)/1,310 nm (receive) |
LC |
9/125 μm single-mode optical fiber |
10 km (6 miles) |
|
SFP-GE-LH70-SM1470-CW |
1,470 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH70-SM1490-CW |
1,490 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH70-SM1510-CW |
1,510 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH70-SM1530-CW |
1,530 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH70-SM1550-CW |
1,550 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH70-SM1570-CW |
1,570 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH70-SM1590-CW |
1,590 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-GE-LH70-SM1610-CW |
1,610 nm |
LC |
9/125 μm single-mode optical fiber |
70 km (43.5 miles) |
|
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
50/125μm multi-mode fiber |
2 km (1.24 miles) |
|
62.5/125μm multi-mode fiber |
||||
|
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
|
SFP-FE-LH40-SM1310 |
1310 nm |
LC |
9/125μm single mode fiber |
40 km (24.86 miles) |
|
SFP-FE-LH80-SM1550 |
1550 nm |
LC |
9/125μm single mode fiber |
80 km (49.71 miles) |
|
SFP-FE-LX-SM1310-BIDI |
1550 nm (receive)/1310 nm (transmit) |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
|
SFP-FE-LX-SM1550-BIDI |
1550 nm (transmit)/1310 nm (receive) |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
3 Note
For module installation, see H3C S7500E Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download
Copyright © 2008-2017 New H3C Technologies Co., Ltd.
