Login
| Title | Size | Downloads |
|---|---|---|
| H3C LSQ1CTGS16SC0 Card Manual-6PW101-book.pdf | 56.09 KB |
- Table of Contents
Service Processing Engine for S7503E-S–LSQ1CTGS16SC0
1 Card identifier
The mark LSQ1CTGS16SC0 is printed in the upper left corner of the front panel to identify the card.
2 Specifications
Table 1 LSQ1CTGS16SC0 specifications
|
Item |
LSQ1CTGS16SC0 |
|
Connector |
· LC · RJ-45 |
|
Port quantity |
· One Console port : Support local/remote dialup configuration management of the switch · One 10/100/1000Base-T interface for management · Sixteen SFP+ Ethernet ports |
|
Interface transmission speed |
· Console port: ￡ 115,200 bps (default: 9,600 bps) · 10/100/1000Base-T interface: 10/100/1000 Mbps (half/full duplex) · SFP+ interface: 10 Gbps, 1 Gbps |
|
Cable and maximum transmission distance |
· Console port: Ordinary asynchronous serial port cable; maximum transmission distance: 15 m (49.21 ft). · 10/100/1000Base-T interface: Category-5 twisted pair; maximum transmission distance: 100 m (328.08 ft). |
|
Applied to |
S7503E-S switch |
|
Host software version |
Release 6700 and later versions |
For supported SFP+ modules, refer to the following table.
Table 2 SFP+ module specifications
|
SFP+ module |
Central wavelength |
Connector type |
Cable specifications |
Modal bandwidth |
Max transmission distance |
|
SFP-XG-SX-MM850-A |
850 nm |
LC |
50/125 μm MMF |
2000 MHz*km |
300 m (984.25 ft) |
|
500 MHz*km |
82 m (269.03 ft) |
||||
|
400 MHz*km |
66 m (216.54 ft) |
||||
|
62.5/125 μm MMF |
200 MHz*km |
33 m (108.27 ft) |
|||
|
160 MHz*km |
26 m (85.30 ft) |
||||
|
SFP-XG-LX220-MM1310 |
1310 nm |
LC |
62.5/125 μm MMF |
500 MHz*km |
220 m (721.78 ft) |
|
50/125 μm MMF |
500 MHz*km |
220 m (721.78 ft) |
|||
|
400 MHz*km |
100 m (328.08 ft) |
||||
|
SFP-XG-LX-SM1310 |
1310 nm |
LC |
9/125 μm SMF |
N/A |
10 km (6.21 miles) |
|
SFP-XG-LH40-SM1550 |
1550 nm |
LC |
9/125 μm SMF |
N/A |
40 km (24.86 miles) |
For supported SFP+ Cable modules, refer to the following table.
Table 3 Specifications of SFP+ Cable
|
Optional SFP+ Cable |
Length |
Data rate |
Type |
Remarks |
|
LSWM2STK |
1.2 m (3.94 ft.) |
10.31 Gbps |
SFP+ cable |
Dedicated to interconnecting SFP+ ports |
|
LSWM3STK |
3 m (9.84 ft.) |
|||
|
LSTM1STK |
5 m (16.40 ft.) |
|||
|
LSTM2STK |
7 m (22.97 ft) |
For supported Gigabit SFP modules, refer to the following table.
Table 4 Gigabit SFP module specifications
|
Gigabit SFP module |
Central wavelength |
Connector |
Cable specifications |
Max transmission distance |
|
|
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multimode fiber |
550 m (1804.46 ft) |
|
|
62.5/125 μm multimode fiber |
275 m (902.23 ft) |
||||
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single-mode fiber |
10 km (6.21 miles) |
|
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single-mode fiber |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single-mode fiber |
40 km (24.86 miles) |
|
|
SFP-GE-LH70-SM1550 |
1550 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single-mode fiber |
100 km (62.14 miles) |
|
|
SFP-GE-T |
N/A |
RJ-45 |
Category-5 twisted pair |
100 m (328.08 ft) |
|
|
SFP-GE-LX-SM1310-BIDI |
The two modules must be used together. |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 μm single-mode fiber |
10 km (6.21 miles) |
|
SFP-GE-LX-SM1490-BIDI |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 μm single-mode fiber |
10 km (6.21 miles) |
|
|
SFP-GE-LH70-SM1470-CW |
1470 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1490-CW |
1490 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1510-CW |
1510 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1530-CW |
1530 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1550-CW |
1550 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1570-CW |
1570 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1590-CW |
1590 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1610-CW |
1610 nm |
LC |
9/125 μm single-mode fiber |
70 km (43.50 miles) |
|
3 Obtaining documentation
For card installation, see the related installation guide.
For software upgrade, see the related software upgrade guide.
Take the following steps to get the latest documentation from the H3C website at www.h3c.com.
· Go to http://www.h3c.com/portal/Technical_Documents, or click Technical Support & Documents > Technical Documents on the top navigation bar at http://www.h3c.com.
· Choose the desired product category and model.
Copyright © 2012 Hangzhou H3C Technologies Co., Ltd.
