H3C LSQ1GV48SA0 Card Manual-V1.04

HomeSupportResource CenterSwitchesH3C S7500E Switch SeriesH3C S7500E Switch SeriesTechnical DocumentsInstallCard Module ManualsH3C LSQ1GV48SA0 Card Manual-V1.04
Download Book
Title Size Downloads
H3C LSQ1GV48SA0 Card Manual-V1.04-book.pdf 13.71 KB

48-port 10/100/1000Base-T Gigabit Ethernet Card–LSQ1GV48SA0

Card Identifier

The silkscreen LSQ1GV48SA0 is printed at the upper right corner of the front panel, and is used to identify the card.

Specifications

Table1 LSQ1GV48SA0 specifications

Item

LSQ1GV48SA0

Connector

RJ-45

Port quantity

Forty-eight 10/100/1000Base-T Gigabit Ethernet ports

Interface transmission speed

10/100/1000 Mbps (half/full duplex)

Cable and maximum transmission distance

Category-5 twisted pair; maximum transmission distance: 100 m (328 ft)

Optional module supported by the card

DIMM for PoE Master and Slave Power Management (LSBM1POEDIMMH)

This module enables the card to support PoE power supply for 48 ports.

Applied to

S7500E Series Ethernet switches

Host software version

Release 6100 and Later

 

Obtaining More Information

For module installation, see H3C S7500E Switch Series Installation Guide.

To access the most up-to-date H3C product documentation, go to

http://www.h3c.com.hk/Technical_Documents

For software upgrade, see the release notes for the device.

To access the release notes, go to

http://www.h3c.com.hk/Software_Download

 

 

Copyright © 2007-2017 New H3C Technologies Co., Ltd.