H3C LSQ1GP48SC0 Card Manual-V1.04

HomeSupportResource CenterSwitchesH3C S7500E Switch SeriesH3C S7500E Switch SeriesTechnical DocumentsInstallCard Module ManualsH3C LSQ1GP48SC0 Card Manual-V1.04
Download Book
Title Size Downloads
H3C LSQ1GP48SC0 Card Manual-V1.04-book.pdf 27.80 KB

48-port 1000BASE-X/100BASE-FX Interface Ethernet Card–LSQ1GP48SC0

Card Identifier

The silkscreen LSQ1GP48SC0 is printed at the upper right corner of the front panel, and is used to identify the card.

Specifications

Table1 LSQ1GP48SC0 specifications

Item

LSQ1GP48SC0

Connector

LC

Port quantity

48

Interface transmission speed

1000/100Mbps(full duplex)

Type of hot-swappable module

See Table2.

Applied to

S7500E Series Ethernet switches

Host software version

Release 6100 and Later

 

For supported hot-swappable modules, refer to the following table.

Table2 SFP module specifications

Type

Central wavelength

Connector type

Cable specifications

Maximum transmission distance

SFP-GE-SX-MM850-A

850 nm

LC

50/125 μm multi-mode fiber

550 m (0.34 miles)

62.5/125 μm multi-mode fiber

275 m (0.17 miles)

SFP-GE-LX-SM1310-A

1310 nm

LC

9/125 μm single mode fiber

10 km (6.21 miles)

SFP-GE-LH40-SM1310

1310 nm

LC

9/125 μm single mode fiber

40 km (24.86 miles)

SFP-GE-LH40-SM1550

1550 nm

LC

9/125 μm single mode fiber

40 km (24.86 miles)

SFP-GE-LH70-SM1550

1550 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH100-SM1550

1550 nm

LC

9/125 μm single mode fiber

100 km (62.14 miles)

SFP-GE-T

RJ-45

Category-5 twisted pair cable

100 m (0.06 miles)

SFP-GE-LX-SM1310-BIDI

1490 nm (receive)/1310 nm (transmit)

LC

9/125 μm single mode fiber

10 km (6.21 miles)

SFP-GE-LX-SM1490-BIDI

1490 nm (transmit)/1310 nm (receive)

LC

9/125 μm single mode fiber

10 km (6.21 miles)

SFP-GE-LH70-SM1470-CW

1470 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH70-SM1490-CW

1490 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH70-SM1510-CW

1510 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH70-SM1530-CW

1530 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH70-SM1550-CW

1550 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH70-SM1570-CW

1570 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH70-SM1590-CW

1590 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-GE-LH70-SM1610-CW

1610 nm

LC

9/125 μm single mode fiber

70 km (43.50 miles)

SFP-FE-SX-MM1310-A

1310 nm

LC

50/125μm multi-mode fiber

2 km (1.24 miles)

62.5/125μm multi-mode fiber

SFP-FE-LX-SM1310-A

1310 nm

LC

9/125μm single mode fiber

15 km (9.32 miles)

SFP-FE-LH40-SM1310

1310 nm

LC

9/125μm single mode fiber

40 km (24.86 miles)

SFP-FE-LH80-SM1550

1550 nm

LC

9/125μm single mode fiber

80 km (49.71 miles)

SFP-FE-LX-SM1310-BIDI

1550 nm (receive)/1310 nm (transmit)

LC

9/125μm single mode fiber

15 km (9.32 miles)

SFP-FE-LX-SM1550-BIDI

1550 nm (transmit)/1310 nm (receive)

LC

9/125μm single mode fiber

15 km (9.32 miles)

 

l BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber.

l BIDI modules must be used in pair. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end.

 

Obtaining More Information

For module installation, see H3C S7500E Switch Series Installation Guide.

To access the most up-to-date H3C product documentation, go to

http://www.h3c.com.hk/Technical_Documents

For software upgrade, see the release notes for the device.

To access the release notes, go to

http://www.h3c.com.hk/Software_Download

 

 

Copyright © 2007-2017 New H3C Technologies Co., Ltd.