H3C S12500X-AF LSXM4TGS48FX1 Card Manual-6PW101

HomeSupportSwitchesH3C S12500X-AF Switch SeriesInstall & UpgradeService Module Card ManualsH3C S12500X-AF LSXM4TGS48FX1 Card Manual-6PW101
Download Book

LSXM4TGS48FX1 48-port 10-GE SFP+
fiber interface card

1  Card identifier

The card identifier LSXM4TGS48FX1 is at the upper right corner of the front panel.

2  Specifications

Table 1 Card specifications

Item

Specification

Processor

MIPS64 (Dual Core) @ 1.0 GHz.

SDRAM

4 GB DDR3 SDRAM.

Power consumption

132 W to 235 W.

Interfaces

48 SFP+ ports.

Transmission rate

10/1 Gbps.

Transmission medium and max transmission distance

See Table 2, Table 3, and Table 4.

Compatible device models

S12500X-AF Switch Series.

Compatible switching fabric modules

Type F switching fabric modules.

 

IMPORTANT

IMPORTANT:

·     To verify the compatibility of the module with the software release you are using, see the release notes.

·     This card can be used only with Type F switching fabric modules, which have a character string of SFF in their card identifiers (for example, LSXM1SFF16C1). This card cannot operate correctly if it is used with a switching fabric module that is not Type F.

 

 

NOTE:

Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules when the switch is operating, use the display device command.

 

The card supports transceiver modules and cables described in Table 2, Table 3, and Table 4.

Table 2 10-Gigabit SFP+ transceiver module specifications

10-Gigabit SFP+ transceiver module

Central wavelength

Connector type

Fiber specifications

Modal bandwidth ( MHz*km)

Max transmission distance

SFP-XG-SX-MM850-A

850 nm

LC

50/125 μm, MMF

2000

300 m (984.26 ft.)

500

82 m (269.03 ft)

400

66 m (216.54 ft)

62.5/125 μm, MMF

200

33 m (108.27 ft)

160

26 m (85.30 ft)

SFP-XG-LX-SM1310

1310 nm

LC

9/125 μm, SMF

N/A

10 km (6.21 miles)

SFP-XG-LH40-SM1550

1550nm

LC

9/125 μm, SMF

N/A

40 km (24.86 miles)

SFP-XG-LH80-SM1550

1550nm

LC

9/125 μm, SMF

N/A

80 km (49.71 miles)

SFP-XG-LH80-Tunable

1528.773 to 1566.723 nm

LC

9/125 μm, SMF

N/A

80 km (49.71 miles)

 

 

NOTE:

·     The SFP-XG-LH80-Tunable module supports wavelength adjustment. You can use the itu-channel command in Ethernet interface view to adjust the wavelength of the module. To display ITU channel information for transceiver modules, execute the display transceiver itu-channel command.

·     Cold-staring the SFP-XG-LH80-Tunable module takes a longer time (usually not exceeding 90s) than cold-starting any other SFP+ modules.

 

Table 3 SFP+ cable specifications

10-Gigabit SFP+ cable

Length

Data rate

Type

Remarks

LSWM2STK

1.2 m (3.94 ft.)

10.31 Gbps

SFP+ cable

Dedicated to interconnecting SFP+ ports

LSWM3STK

3 m (9.84 ft.)

LSTM1STK

5 m (16.40 ft.)

 

Table 4 Gigabit SFP transceiver module specifications

Gigabit SFP transceiver module

Central wavelength

Connector type

Fiber specifications

Modal bandwidth (MHz*km)

Maximum transmission distance

SFP-GE-SX-MM850-A

850 nm

LC

50/125 μm, MMF

500

550 m (1804.46 ft)

400

500 m (1640.42 ft)

62.5/125 μm, MMF

200

275 m (902.23 ft)

160

220 m (721.78 ft)

SFP-GE-LX-SM1310-A

1310 nm

LC

9/125 μm, SMF

N/A

10 km (6.21 miles)

50/125 μm, MMF

500

550 m (1804.46 ft)

400

62.5/125 μm, MMF

500

550 m (1804.46 ft)

SFP-GE-LH40-SM1310

1310 nm

LC

9/125 μm, SMF

N/A

40 km (18.64 miles)

SFP-GE-LH40-SM1550

1550 nm

LC

9/125 μm, SMF

N/A

40 km (24.86 miles)

SFP-GE-LH70-SM1550

1550 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH100-SM1550

1550 nm

LC

9/125 μm, SMF

N/A

100 km (62.14 miles)

SFP-GE-LX-SM1310-BIDI

TX: 1310 nm

RX: 1490 nm

LC

9/125 μm, SMF

N/A

10 km (6.21 miles)

SFP-GE-LX-SM1490-BIDI

TX: 1490 nm

RX: 1310 nm

LC

9/125 μm, SMF

N/A

10 km (6.21 miles)

SFP-GE-LH70-SM1470-CW

1470 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1490-CW

1490 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1510-CW

1510 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1530-CW

1530 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1550-CW

1550 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1570-CW

1570 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1590-CW

1590 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1610-CW

1610 nm

LC

9/125 μm, SMF

N/A

70 km (43.50 miles)

 

IMPORTANT

IMPORTANT:

You must use the SFP-GE-LX-SM1310-BIDI and the SFP-GE-LX-SM1490-BIDI in pairs.

 

3  Obtaining documentation

For card installation, see H3C S12500X-AF Switch Series Installation Guide.

To access the most up-to-date H3C product documentation, go to

http://www.h3c.com.hk/Technical_Documents

For software upgrade, see the release notes for the device.

To access the release notes, go to

http://www.h3c.com.hk/Software_Download

 

 

Copyright © 2017 New H3C Technologies Co., Ltd.

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网