H3C LSXM1GT48FX1 Card Manual-6PW101

HomeSupportSwitchesH3C S12500X-AF Switch SeriesInstall & UpgradeService Module Card ManualsH3C LSXM1GT48FX1 Card Manual-6PW101
Download Book
Title Size Downloads
H3C LSXM1GT48FX1 Card Manual-6PW101-book.pdf 26.05 KB

48-port 10/100/1000Base-T Gigabit Ethernet Card–LSXM1GT48FX1

1  Card identifier

The mark LSXM1GT48FX1 is printed at the upper right corner of the front panel, and is used to identify the card.

2  Specifications

Table 1 LSXM1GT48FX1 specifications

Item

Specification

Processor

MIPS64 (Dual Core), 1.0GHz.

SDRAM  

4GB DDR3 SDRAM.

Power consumption

122 W to 145 W.

Connector

RJ-45.

Ports

48 10/100/1000Base-T Gigabit Ethernet ports.

Transmission rate

10/100/1000 Mbps (half/full duplex).

Transmission medium and max transmission distance

Category-5 twisted pair; maximum transmission distance: 100 m (328 ft).

Compatible device models

·     S12500-X Switch Series.

·     S12500X-AF Switch Series.

Compatible switching fabric modules

·     S12500-X switch: All types of switching fabric modules.

·     S12500X-AF switch: Type F switching fabric modules.

 

IMPORTANT

IMPORTANT:

·     To verify compatibility of the card with the software release you are using, see the release notes.

·     For an S12500X-AF switch, this card can be used only with Type F switching fabric modules, which have a character string of SFF in their card identifiers (for example, LSXM1SFF16C1). This card cannot operate correctly if it is used with a switching fabric module that is not Type F.

·     Remove the protection box from the card before you install the card.

·     Follow these guidelines to install the card:

?     On an S12500-X switch, install the card directly in the target slot.

?     On an S12500X-AF switch, install an interface module adapter in the target slot before you install the card. No interface module adapter is provided with the card, purchase one before installation.

 

 

NOTE:

On an S12500X-AF switch, switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules while the switch is operating, use the display device command.

 

3  Obtaining documentation

For module installation, see H3C S12500-X Switch Series Installation Guide or H3C S12500X-AF Switch Series Installation Guide.

To access the most up-to-date H3C product documentation, go to

http://www.h3c.com.hk/Technical_Documents

For software upgrade, see the release notes for the device.

To access the release notes, go to

http://www.h3c.com.hk/Software_Download

 

 

Copyright © 2017 New H3C Technologies Co., Ltd.

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网