Login
| Title | Size | Downloads |
|---|---|---|
| H3C LSXM1CGP8FX1 Card Manual-6PW101-book.pdf | 27.39 KB |
- Table of Contents
- Related Documents
LSXM1CGP8FX1 8-port 100-GE
CFP2 fiber
interface card
1 Card identifier
The card identifier LSXM1CGP8FX1 is at the upper right corner of the front panel.
2 Specifications
Table 1 Card specifications
|
Item |
Specification |
|
Processor |
MIPS64 (Dual Core) @ 1.2 GHz. |
|
SDRAM |
4 GB DDR3 SDRAM. |
|
Power consumption |
253 W to 410 W. |
|
Interfaces |
8 CFP2 ports. |
|
Transmission rate |
100 Gbps. |
|
Transmission medium and max transmission distance |
See Table 2. |
|
Compatible device models |
· S12500-X Switch Series. · S12500X-AF Switch Series. |
|
Compatible switching fabric modules |
· S12500-X switch: All types of switching fabric modules. · S12500X-AF switch: Type F switching fabric modules. |
|
|
IMPORTANT: · To verify compatibility of the card with the software release you are using, see the release notes. · For an S12500X-AF switch, this card can be used only with Type F switching fabric modules, which have a character string of SFF in their card identifiers (for example, LSXM1SFF16C1). This card cannot operate correctly if it is used with a switching fabric module that is not Type F. · Remove the protection box from the card before you install the card. · Follow these guidelines to install the card: ? On an S12500-X switch, install the card directly in the target slot. ? On an S12500X-AF switch, install an interface module adapter in the target slot before you install the card. No interface module adapter is provided with the card, purchase one before installation. |
|
|
NOTE: On an S12500X-AF switch, switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules while the switch is operating, use the display device command. |
The card supports CFP2 modules described in Table 2.
Table 2 CFP2 module specifications
|
CFP2 module |
Central wavelength |
Connector |
Cable specifications |
Max. transmission distance |
|
CFP2-100G-LR4-WDM1300 |
Four lanes: · 1295.56 nm · 1300.05 nm · 1304.58 nm · 1309.14 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
3 Obtaining documentation
For module installation, see H3C S12500-X Switch Series Installation Guide or H3C S12500X-AF Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download
Copyright © 2017 New H3C Technologies Co., Ltd.
