H3C LSXM2SUPT2 Card Manual-6PW104

HomeSupportSwitchesH3C S12500G-AF Switch SeriesInstall & UpgradeMPU Card ManualsH3C LSXM2SUPT2 Card Manual-6PW104
Download Book
  • Released At: 31-10-2021
  • Page Views:
  • Downloads:
Table of Contents
Related Documents

LSXM2SUPT2 supervisor engine unit

1  Identifier

The module identifier LSXM2SUPT2 is in the upper right corner of the front panel.

2  About the module

Table 1 Module specifications

Item

Specification

Processor

Intel Processor (Quad-Core) @ 2.2 GHz

SDRAM

16GB

Flash

8 GB (NAND flash)

NVRAM

512 KB

Power consumption

28 W to 34 W

Connector

·     RJ-45

·     LC

·     USB (Type A)

Ports

·     1 × console port

·     1 × SFP port for management and upgrade

·     1 × 10/100/1000BASE-T port for management and upgrade

·     1 × USB port (USB 2.0, Host port)

Port transmission rate

·     Console port: 9600 bps (default) to 115200 bps

·     SFP port: 1000 Mbps

·     10/100/1000BASE-T port: 10/100/1000 Mbps

Transmission medium and max transmission distance of the console port

15 m (49.21 ft) over an asynchronous serial cable

Transmission medium and max transmission distance of the 10/100/1000BASE-T port

100 m (328.08 ft) over a category-5 twisted pair cable

 

IMPORTANT

IMPORTANT:

·     This module can be used only with Type T fabric modules (such as LSXM1SFT08F2) and Type T interface modules (such as LSXM1TGS48TE2).

·     To verify the compatibility of the module with the software release you are using, see the release notes.

·     For information about transceiver modules and cables available for the module, see the cards and transceiver modules compatibility matrixes for the device.

·     The USB port outputs power as prescribed by USB 2.0. For the USB port to identify the USB device, use only a USB device fully compliant with USB 2.0.

·     Set the same speed and duplex mode for a management Ethernet interface and its peer port.

·     To transfer files from the BootWare menu, you can use only the 10/100/1000BASE-T management port (M0/0/0). The SFP port (M0/0/1) cannot be used for file transfer from the BootWare menu.

 

3  Obtaining documentation

For information about module installation, see the installation guide for the device.

For software upgrade, see the release notes.

 

 

Copyright © 2020-2021 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网