Title | Size | Downloads |
---|---|---|
LSUM1TGT24FD0 Card Manual-6PW101-book.pdf | 24.78 KB |
- Table of Contents
- Related Documents
-
LSUM1TGT24FD0 10GE copper interface module
1 Identifier
The module identifier LSUM1TGT24FD0 is in the upper right corner of the front panel.
2 Specifications
Table 1 Module specifications
Item |
Specifications |
Dimensions (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
SDRAM (DDR4) |
2 GB |
Power consumption |
60 W to 112 W |
Connector type |
RJ-45 |
Ports |
24 |
Port rate |
· 100 Mbps · 1000 Mbps · 2.5 Gbps · 5 Gbps · 10 Gbps |
Available cables |
· 100M/1000M/2.5G copper port: Category 5e or higher twisted pair cables · 5G copper port: Category 6 or higher twisted pair cables · 10G copper port: Category 6a or higher twisted pair cables |
Transmission medium and max transmission distance |
100 m (328.08 ft) |
|
NOTE: To verify the compatibility of the card with the software release you are using, see the release notes. |
The 100M/1000M/2.5G/5G/10G copper port uses an RJ-45 connector.
Figure 1 RJ-45 connector
Table 2 RJ-45 connector pin assignment
Pin |
10G/5G/2.5G/1000/100BASE-T |
|
Signal |
Function |
|
1 |
MX_0+ |
Transmits and receives data |
2 |
MX_0- |
Transmits and receives data |
3 |
MX_1+ |
Transmits and receives data |
4 |
MX_2+ |
Transmits and receives data |
5 |
MX_2- |
Transmits and receives data |
6 |
MX_1- |
Transmits and receives data |
7 |
MX_3+ |
Transmits and receives data |
8 |
MX_3- |
Transmits and receives data |
3 Related documentation
For module installation, see the installation guide for the device.
For software upgrade, see the release notes for the device.
Copyright © 2018-2019 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.