LSUM2GV48SE0 Card Manual-6PW105

HomeSupportResource CenterSwitchesH3C S10500 Switch SeriesH3C S10500 Switch SeriesTechnical DocumentsInstallCard Module ManualsLSUM2GV48SE0 Card Manual-6PW105
Download Book
Title Size Downloads
LSUM2GV48SE0 Card Manual-6PW105-book.pdf 20.04 KB
Table of Contents
Related Documents

48-port 10/100/1000BASE-T electrical Ethernet interface card—LSUM2GV48SE0

1  Card identifier

The card identifier LSUM2GV48SE0 is at the upper right corner of the front panel.

2  Specifications

Table 1 Card specifications

Item

Specifications

Card size (H × W × D)

40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)

SDRAM (DDR3)

1GB

Power consumption

37 W to 51 W

Connector type

RJ-45

Ports

48

Port rate

10/100/1000 Mbps

 

 

NOTE:

To verify the compatibility of the card with the software release you are using, see the release notes.

 

A 10/100/1000BASE-T copper port uses an RJ-45 connector. It supports Category 5 or above twisted pair cables and provides a transmission distance of 100 m (328.08 ft).

Figure 1 RJ-45 connector

 

Table 2 RJ-45 GE connector pin assignment

Pin

10BASE-T/100BASE-TX/1000BASE-T

Signal

Function

1

MX_0+

Transmits and receives data

2

MX_0-

Transmits and receives data

3

MX_1+

Transmits and receives data

4

MX_2+

Transmits and receives data

5

MX_2-

Transmits and receives data

6

MX_1-

Transmits and receives data

7

MX_3+

Transmits and receives data

8

MX_3-

Transmits and receives data

 

3  Related documentation

For module installation, see the installation guide for the device.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2014-2019 New H3C Technologies Co ., Ltd.

The information in this document is subject to change without notice.