LSUM2GP24TSSE0 Card Manual-6PW104

HomeSupportResource CenterSwitchesH3C S10500 Switch SeriesH3C S10500 Switch SeriesTechnical DocumentsInstallCard Module ManualsLSUM2GP24TSSE0 Card Manual-6PW104
Download Book
Title Size Downloads
LSUM2GP24TSSE0 Card Manual-6PW104-book.pdf 17.34 KB
Table of Contents
Related Documents

24-port 1000BASE-X-SFP + 4-port 10GBASE-R-SFP+ optical Ethernet interface card—LSUM2GP24TSSE0

1  Card identifier

The card identifier LSUM2GP24TSSE0 is at the upper right corner of the front panel.

2  Specifications

Table 1 Card specifications

Item

Specifications

Card size (H × W × D)

40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)

SDRAM (DDR3)

1GB

Power consumption

36 W to 55 W

Ports

·         24 x 1000BASE-X-SFP fiber ports

·         4 x 10GBASE-R-SFP+ fiber ports

Port rate

·         1000 Mbps

·         10 Gbps

 

 

NOTE:

·      To verify the compatibility of the card with the software release you are using, see the release notes.

·      For information about transceiver modules and cables available for the card, see the cards and transceiver modules compatibility matrixes for the device.

 

IMPORTANT

IMPORTANT:

For the card to operate correctly, make sure a switching fabric module is installed in one of the two lowest numbered switching fabric module slots on the S10504, S10508, S10508-V, and S10512.

 

3  Related documentation

For information about card installation, see the installation guide for the device.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2014-2019 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.