1 Identifier

The module identifier NS-C100-TG16B1 is in the upper right corner of the front panel.

2 About the module

The NS-C100-TG16B1 interface module provides sixteen 10G fiber ports.

Figure 1 Front panel

(1) 10G fiber ports	(2) Ejector lever
(3) 10G fiber port LEDs	(4) Captive screw

Table 1 Module specifications

Item	Specifications
Dimensions (H × W × D)	37.4 × 174 × 192 mm (1.47 × 6.85 × 7.56 in)
Power consumption	5 W to 23 W
Weight	0.84 kg (1.85 lb)
Hot swapping	Not supported
Ports	16 × 10GBASE-R SFP+ ports
Connector type	LC
Available transceiver modules	See Table 2.
Compatible devices and slots	M9000-AI-E4 multiservice security gateway (slots 2/3 and 2/4)

Table 2 describes the specifications of SFP+ transceiver modules available for the 10GBASE-R SFP+ ports.

Table 2 SFP+ transceiver modules available for the 10GBASE-R SFP+ ports

Module	Central wavelength	Connector type	Cable specifications	Maximum transmission distance
SFP-XG-SX-MM850-A	850 nm	LC	50/125 µm MMF	300 m (984.25 ft)
SFP-XG-LX-SM1310	1310 nm	LC	9/125 µm SMF	10 km (6.21 miles)
SFP-XG-LH40-SM1550	1550 nm	LC	9/125 µm SMF	40 km (24.85 miles)

The module provides a LED for each 10G fiber port to indicate their operating status.

Status	Description
Flashing	The port is sending or receiving data.
On	A link is present on the port.
Off	No link is present on the port.

For information about installing the module, see the installation guide for the device.

The information in this document is subject to change without notice.