04-Layer 2 - LAN Switching

HomeSupportResource CenterH3C Access Controllers Command References(E5208P03 E5215P01 R5215P01)-6W10204-Layer 2 - LAN Switching
06-LLDP commands
Title Size Download
06-LLDP commands 231.85 KB

LLDP commands

Support for interfaces of different types varies by device model. For more information, see Ethernet interface configuration in Interface Configuration Guide.

display lldp local-information

Use display lldp local-information to display local LLDP information, which will be contained in the advertisable LLDP TLVs and sent to neighboring devices.

Syntax

display lldp local-information [ global | interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

global: Displays the global local LLDP information.

interface interface-type interface-number: Specifies a port by its type and number.

Usage guidelines

If you do not specify any keywords or arguments, the command displays all local LLDP information, which includes the following:

·     The global LLDP information.

·     The LLDP information about the LLDP-enabled ports in up state.

Examples

# Display all local LLDP information.

<Sysname> display lldp local-information

Global LLDP local-information:                                                 

 Chassis ID          : 70f9-6d81-1327                                          

 System name         : Sysname

 System description  : H3C Comware Platform Software, Software Version 7.1.064,

                       ESS 5108                                                

                       H3C WX5510E                                             

                       Copyright (c) 2004-2015 New H3C Technologies Co., Ltd. All

                       rights reserved.                                                

 System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge

 System capabilities enabled   : Bridge, Router, Customer Bridge                

                                                                               

 MED information:                                                              

 Device class               : Connectivity device                              

 MED inventory information of master board:                                    

 HardwareRev                : Ver.c                                            

 FirmwareRev                : 3.00                                             

 SoftwareRev                : 7.1.064                                          

 SerialNum                  : 210235A0Y2f080840111                             

 Manufacturer name          : H3C                                               

 Model name                 : WX5510E                                        

 Asset tracking identifier  : Unknown                                          

                                                                               

LLDP local-information of port 1[GigabitEthernet1/0/1]:                        

 Port ID type        : Interface name                                          

 Port ID             : GigabitEthernet1/0/1                                    

 Port description    : GigabitEthernet1/0/1 Interface                           

 LLDP agent nearest-bridge management address:                                 

 Management address type           : IPv4                                      

 Management address                : 110.0.0.30                                

 Management address interface type : IfIndex                                   

 Management address interface ID   : 198                                       

 Management address OID            : 0                                         

 LLDP agent nearest-nontpmr management address:                                

 Management address type           : IPv4                                      

 Management address                : 110.0.0.30                                

 Management address interface type : IfIndex                                   

 Management address interface ID   : 198                                       

 Management address OID            : 0                                          

 LLDP agent nearest-customer management address:                               

 Management address type           : IPv4                                      

 Management address                : 110.0.0.30                                 

 Management address interface type : IfIndex                                   

 Management address interface ID   : 198                                       

 Management address OID            : 0                                          

 DCBX Control info:                                                            

  Oper version       : Standard                                                

 DCBX PFC info:                                                                 

  P0-0     P1-0     P2-0     P3-0     P4-0     P5-0     P6-0     P7-0          

  Number of traffic classes supported: 8                                       

  Value of MBC: 0                                                              

 Port VLAN ID(PVID)  : 1                                                       

 Port and protocol VLAN ID(PPVID)  : 0                                         

 Port and protocol VLAN supported  : No                                        

 Port and protocol VLAN enabled    : No                                        

 VLAN name of VLAN 1        : VLAN 0001                                        

 Management VLAN ID  : 0                                                       

 Link aggregation supported : Yes                                               

 Link aggregation enabled   : Yes                                              

 Aggregation port ID        : 1                                                

 Auto-negotiation supported : Yes                                              

 Auto-negotiation enabled   : No                                               

 OperMau                    : Speed(1000)/Duplex(Full)                         

 Power port class           : PD                                               

 PSE power supported        : No                                               

 PSE power enabled          : No                                               

 PSE pairs control ability  : No                                               

 Power pairs                : Signal                                           

 Port power classification  : Class 0                                          

 Maximum frame size         : 4096                                              

 Transmit Tw                : 0 us                                             

 Receive Tw                 : 0 us                                             

 Fallback Tw                : 0 us                                              

 Echo Transmit Tw           : 0 us                                             

 Echo Receive Tw            : 0 us                                             

 PoE PSE power source       : Unknown                                           

 Port PSE priority          : Unknown                                          

 Port available power value : 0.0 w                                             

                                                                                

LLDP local-information of port 4[Bridge-Aggregation1]:                         

 Port ID type        : Interface name                                          

 Port ID             : Bridge-Aggregation1                                     

 Port description    : Bridge-Aggregation1 Interface                           

 LLDP agent nearest-nontpmr management address:                                

 Management address type           : IPv4                                      

 Management address                : 110.0.0.30                                

 Management address interface type : IfIndex                                   

 Management address interface ID   : 198                                       

 Management address OID            : 0                                         

 LLDP agent nearest-customer management address:                               

 Management address type           : IPv4                                      

 Management address                : 110.0.0.30                                

 Management address interface type : IfIndex                                   

 Management address interface ID   : 198                                       

 Management address OID            : 0                                         

 Port VLAN ID(PVID)  : 1                                                       

 Port and protocol VLAN ID(PPVID)  : 0                                         

 Port and protocol VLAN supported  : No                                        

 Port and protocol VLAN enabled    : No                                        

 VLAN name of VLAN 1        : VLAN 0001                                        

 Management VLAN ID  : 0 

 Link aggregation supported : Yes                                              

 Link aggregation enabled   : No                                               

 Aggregation port ID        : 0                                                

 Auto-negotiation supported : Yes                                               

 Auto-negotiation enabled   : Yes                                              

 OperMau                    : Speed(1000)/Duplex(Full)                        

 Power port class           : PSE                                              

 PSE power supported        : Yes                                             

 PSE power enabled          : No                                              

 PSE pairs control ability  : No                                               

 Power pairs                : Signal                                          

 Port power classification  : Class 0                                         

 Power type                 : Type 2 PSE                                      

 Power source               : Primary                                         

 Power priority             : Low                                             

 PD requested power value   : 0.0 w                                           

 PSE allocated power value  : 29.5 w                                          

 Maximum frame size         : 4000                                            

 Transmit Tw                : 0 us                                            

 Receive Tw                 : 0 us                                            

 Fallback Tw                : 0 us                                            

 Echo Transmit Tw           : 0 us                                            

 Echo Receive Tw            : 0 us                                            

 PoE PSE power source       : Primary                                         

 Port PSE priority          : Low                                             

 Port available power value : 36.0 w                                           

Table 1 Command output

Field

Description

Chassis ID

Bridge MAC address of the device.

System capabilities supported

Supported capabilities:

·     Bridge—Switching is supported.

·     Router—Routing is supported.

·     WlanAccessPointThe local device can act as a wireless AP.

·     Repeater—Signal repeating is supported.

·     TelephoneThe local device can act as a telephone.

·     DocsisCableDeviceThe local device can act as a DOCSIS-compliant cable device.

·     StationOnlyThe local device can act as a station only.

·     Customer BridgeThe customer bridge feature is supported.

·     Service BridgeThe service bridge feature is supported.

·     TPMRThe TPMR feature is supported.

·     OtherFeatures other than those listed above are supported.

System capabilities enabled

Enabled capabilities:

·     Bridge—Switching is enabled.

·     Router—Routing is enabled.

·     WlanAccessPointThe local device is acting as a wireless AP.

·     Repeater—Signal repeating is enabled.

·     TelephoneThe local device is acting as a telephone.

·     DocsisCableDeviceThe local device is acting as a DOCSIS-compliant cable device.

·     StationOnlyThe local device is acting as a station only.

·     Customer BridgeThe customer bridge feature is enabled.

·     Service BridgeThe service bridge feature is enabled.

·     TPMRThe TPMR feature is enabled.

·     OtherFeatures other than those listed above are enabled.

Device class

MED device class:

·     Connectivity device—Network device.

·     Class I—Normal terminal device. It requires the basic LLDP discovery services.

·     Class II—Media terminal device. It supports media streams, and can also act as a normal terminal device.

·     Class III—Communication terminal device. It supports the IP communication systems of end users, and can also act as a normal terminal device or media terminal device.

HardwareRev

Hardware version.

FirmwareRev

Firmware version.

SoftwareRev

Software version.

SerialNum

Serial number.

Manufacturer name

Device manufacturer.

Model name

Device model.

Port ID type

Port ID type:

·     MAC address.

·     Interface name.

Port ID

Port ID, the value of which depends on the port ID type.

Management address interface type

Numbering type of the interface identified by the management address.

Management address interface ID

Index of the interface identified by the management address.

Management address OID

Management address object ID.

DCBX control info

Displayed as version information in IEEE Std 802.1Qaz-2011.

The device does not support this field in the current software version.

Oper version

DCBX version number.

P0-   P1-   P2-   P3-   P4-   P5-   P6-   P7-

Number of supported priorities configured by using the priority-flow-control no-drop dot1p dot1p-list command at the local end.

Number of traffic classes supported

Number of traffic classes supported by PFC (displayed only in Rev 1.01).

DCBX PFC info

The device does not support this field in the current software version.

Value of MBC

MBC indicates the ability of packets to bypass MACsec. It is 1-bit long.

·     0—Packets can bypass MACsec when MACsec is disabled.

·     1—Packets cannot bypass MACsec when MACsec is disabled.

Link aggregation supported

Indicates whether link aggregation is supported on the port.

Link aggregation enabled

Indicates whether link aggregation is enabled on the port.

Aggregation port ID

ID of the port in the aggregation group. The ID is 0 when link aggregation is disabled

Auto-negotiation supported

Indicates whether autonegotiation is supported on the port.

Auto-negotiation enabled

Indicates whether autonegotiation is enabled on the port.

OperMau

Speed and duplex state of the port.

Power port class

PoE port class:

·     PSE—Power sourcing equipment.

·     PD—Powered device.

PSE power supported

Indicates whether the device can operate as a PSE.

PSE power enabled

Indicates whether the device is operating as a PSE.

PSE pairs control ability

Indicates whether the pair selection ability is available.

Power pairs

Power supply mode:

·     SignalUses data pairs to supply power.

·     SpareUses spare pairs to supply power.

Port power classification

Power class of the PD:

·     Class 0.

·     Class 1.

·     Class 2.

·     Class 3.

·     Class 4.

Power type

Power supply type:

·     Type 1 PD.

·     Type 2 PD.

·     Type 1 PSE.

·     Type 2 PSE.

Power source

Power source:

·     When the power supply type is PSE, options are:

¡     Unknown—Unknown power supply.

¡     Primary—Primary power supply.

¡     Backup—Backup power supply.

¡     Reserved.

·     When the power supply type is PD, options are:

¡     Unknown—Unknown power supply.

¡     PSE—PSE power supply.

¡     Local—Local power supply.

¡     PSE and local—PSE and local power supplies.

Power priority

·     Unknown.

·     Critical.

·     High.

·     Low.

PD requested power value

PD requested power in watts.

PSE allocated power value

PSE allocated power in watts.

PoE PSE power source

PSE power source type:

·     Unknown—Unknown power supply.

·     Primary—Primary power supply.

·     Backup—Backup power supply.

Port PSE priority

PoE power supply priority of PSE ports:

·     Unknown.

·     Critical.

·     High.

·     Low.

Port available power value

Available PoE power on PSE ports, or power needed on PD ports, in watts.

Transmit Tw

Sleep time of the local client, in μs.

Receive Tw

Sleep time of the peer client expected by the local client, in μs.

Fallback Tw

Candidate sleep time of the peer client expected by the local client, in μs.

Echo Transmit Tw

Sleep time of the peer client, in μs. This field displays zero when one of the following cases occurs:

·     The local client has not received the sleep time of the peer client.

·     The sleep time of the peer client is 0 μs.

Echo Receive Tw

Sleep time of the local client expected by the peer client, in μs. This field displays zero when one of the following cases occurs:

·     The local client has not received the expected sleep time from the peer client.

·     The sleep time of the local client expected by the peer client is 0 μs.

 

display lldp neighbor-information

Use display lldp neighbor-information to display the LLDP information carried in LLDP TLVs that the local device receives from the neighboring devices.

Syntax

display lldp neighbor-information [ [ [ interface interface-type interface-number ] [ agent { nearest-bridge | nearest-customer | nearest-nontpmr } ] [ verbose ] ] | list [ system-name system-name ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies a port by its type and number. If you do not specify this option, the command displays the LLDP information that all ports receive from the neighboring devices.

agent: Specifies an agent type. If you do not specify an agent type, the command displays the LLDP information that all LLDP agents receive from the neighboring devices.

nearest-bridge: Specifies nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

verbose: Displays the detailed LLDP information that the local device receives from the neighboring devices. If you do not specify this keyword, the command displays the brief LLDP information that the local device receives from the neighboring devices.

list: Displays the LLDP information that the local device receives from the neighboring devices in the form of a list.

system-name system-name: Displays the LLDP information that the local device receives from a neighboring device specified by its system name. The system-name argument is a string of 1 to 255 characters. If you do not specify this option, the command displays the LLDP information that the local device receives from all neighboring devices in a list.

Examples

# Display the detailed LLDP information that the nearest bridge agents on all ports received from the neighboring devices.

<Sysname> display lldp neighbor-information agent nearest-bridge verbose

LLDP neighbor-information of port 1[GigabitEthernet1/0/1]:

LLDP agent nearest-bridge:

 LLDP Neighbor index : 1

 Update time         : 0 days, 0 hours, 1 minutes, 1 seconds

 LLDP mac type       : Nearest Bridge

 Chassis type        : MAC address

 Chassis ID          : 000f-0055-0002

 Port ID type        : Interface name

 Port ID             : GigabitEthernet1/0/1

 Time to live        : 121

 Port description    : GigabitEthernet1/0/1 Interface

 System name         : Sysname

 System description  : H3C Comware Platform Software

 System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge

 System capabilities enabled   : Bridge, Router, Customer Bridge

 Management address type           : IPv4

 Management address                : 192.168.1.55

 Management address interface type : IfIndex

 Management address interface ID   : Unknown

 Management address OID            : 0

Port VLAN ID(PVID): 1

 Port and protocol VLAN ID(PPVID) : 12

 Port and protocol VLAN supported : Yes

 Port and protocol VLAN enabled   : Yes

 VLAN name of VLAN 12: VLAN 0012

 Management VLAN ID  : 5

 Auto-negotiation supported : Yes

 Auto-negotiation enabled   : Yes

 OperMau                    : Speed(1000)/Duplex(Full)

 Power port class           : PD

 PSE power supported        : Yes

 PSE power enabled          : Yes

 PSE pairs control ability  : Yes

 Power pairs                : Signal

 Port power classification  : Class 0

 Power type                 : Type 2 PD

 Power source               : PSE and local

 Power priority             : High

 PD requested power value   : 21.1 w

 PSE allocated power value  : 15.3 w

 Link aggregation supported : Yes

 Link aggregation enabled   : Yes

 Aggregation port ID        : 52

Maximum frame size         : 1500

 Transmit Tw                : 100 us

 Receive Tw                 : 90 us

 Fallback Tw                : 90 us

 Echo Transmit Tw           : 0 us

 Echo Receive Tw            : 0 us

 MED information:

 Device class               : Connectivity device

 Media policy type          : Unknown

 Unknown policy             : No

 VLAN tagged                : No

 Media policy VLAN ID       : 1000

 Media policy L2 priority   : 6

 Media policy DSCP          : 10

 Location format       : Civic Address LCI

 Location information  :

  What(1)  Country(CN)

  CA type  CA value

  0        Chinese

  1        Zhejiang

  2        Hangzhou

 MED port information:

  Media policy type          : Unknown

  Unknown policy             : No

  VLAN tagged                : No

  Media policy VLANID        : 1000

  Media policy L2 priority   : 6

  Media policy DSCP          : 10

 PoE PSE power source       : Primary

 Port PSE priority          : Low

 Port available power value : 2.2 w

 Unknown basic TLV:

  TLV type           : 23

  TLV information    : 0x00140014

 Unknown organizationally-defined TLV:

  TLV OUI            : 00-12-bb

  TLV subtype        : 21

  Index              : 1

  TLV information    : 0x556e6b6e 6f776e

# Display the detailed LLDP information that all LLDP agents on all ports received from the neighboring devices.

<Sysname> display lldp neighbor-information verbose

LLDP neighbor-information of port 1[GigabitEthernet1/0/1]:

LLDP agent nearest-bridge:

 LLDP Neighbor index : 1

 Update time         : 0 days, 0 hours, 1 minutes, 1 seconds

 LLDP mac type       : Nearest Bridge

 Chassis type        : MAC address

 Chassis ID          : 000f-0055-0002

 Port ID type        : Interface name

 Port ID             : GigabitEthernet1/0/1

 Time to live        : 121

 Port description    : GigabitEthernet1/0/1 Interface

 System name         : Sysname

 System description  : H3C Comware Platform Software

 System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge

 System capabilities enabled   : Bridge, Router, Customer Bridge

 Management address type           : IPv4

 Management address                : 192.168.1.55

 Management address interface type : IfIndex

 Management address interface ID   : Unknown

 Management address OID            : 0

Port VLAN ID(PVID): 1

 Port and protocol VLAN ID(PPVID) : 12

 Port and protocol VLAN supported : Yes

 Port and protocol VLAN enabled   : Yes

 VLAN name of VLAN 12: VLAN 0012

 Management VLAN ID  : 5

 Auto-negotiation supported : Yes

 Auto-negotiation enabled   : Yes

 OperMau                    : Speed(1000)/Duplex(Full)

 Power port class           : PD

 PSE power supported        : Yes

 PSE power enabled          : Yes

 PSE pairs control ability  : Yes

 Power pairs                : Signal

 Port power classification  : Class 0

 Power type                 : Type 2 PD

 Power source               : PSE and local

 Power priority             : High

 PD requested power value   : 21.1 w

 PSE allocated power value  : 15.3 w

 Link aggregation supported : Yes

 Link aggregation enabled   : Yes

 Aggregation port ID        : 52

 Maximum frame size         : 1500

 Transmit Tw                : 100 us

 Receive Tw                 : 90 us

 Fallback Tw                : 90 us

 Echo Transmit Tw           : 0 us

 Echo Receive Tw            : 0 us

 Device class               : Connectivity device

 HardwareRev               : Unknown

 FirmwareRev               : Unknown

 SoftwareRev               : Unknown

 SerialNum                 : Unknown

 Manufacturer name         : Unknown

 Model name                : Unknown

 Asset tracking identifier : Unknown

 Location format       : Civic Address LCI

 Location information  :

  What(1)  Country(CN)

  CA type  CA value

  0        Chinese

  1        Zhejiang

  2        Hangzhou

 MED port information:

  Media policy type          : Unknown

  Unknown policy             : No

  VLAN tagged                : No

  Media policy VLANID        : 1000

  Media policy L2 priority   : 6

  Media policy DSCP          : 10

 PoE PSE power source       : Primary

 Port PSE priority          : Low

 Port available power value : 2.2 w

 Unknown basic TLV:

  TLV type           : 23

  TLV information    : 0x00140014

 Unknown organizationally-defined TLV:

  TLV OUI            : 00-12-bb

  TLV subtype        : 21

  Index              : 1

  TLV information    : 0x556e6b6e 6f776e

 

LLDP neighbor-information of port 1[GigabitEthernet1/0/1]:

LLDP agent nearest-nontpmr:

 LLDP Neighbor index : 1

 Update time         : 0 days, 0 hours, 1 minutes, 1 seconds

 Chassis type        : MAC address

 Chassis ID          : 000f-0055-0002

 Port ID type        : Interface name

 Port ID             : GigabitEthernet1/0/1

 Time to live        : 121

 Port description    : GigabitEthernet1/0/1 Interface

 System name         : Sysname

 System description  : H3C Comware Platform Software

 System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge

 System capabilities enabled   : Bridge, Router, Customer Bridge

 Management address type           : IPv4

 Management address                : 192.168.1.55

 Management address interface type : IfIndex

 Management address interface ID   : Unknown

 Management address OID            : 0

 Port VLAN ID(PVID): 1

 Port and protocol VLAN ID(PPVID) : 12

 Port and protocol VLAN supported : Yes

 Port and protocol VLAN enabled   : Yes

 VLAN name of VLAN 12: VLAN 0012

 Auto-negotiation supported : Yes

 Auto-negotiation enabled   : Yes

 OperMau                    : Speed(1000)/Duplex(Full)

 Power port class           : PD

 PSE power supported        : Yes

 PSE power enabled          : Yes

 PSE pairs control ability  : Yes

 Power pairs                : Signal

 Port power classification  : Class 0

 Power type                 : Type 2 PD

 Power source               : PSE and local

 Power priority             : High

 PD requested power value   : 21.1 w

 PSE allocated power value  : 15.3 w

 Link aggregation supported : Yes

 Link aggregation enabled   : Yes

 Aggregation port ID        : 52

Maximum frame size         : 1500

 Transmit Tw                : 100 us

 Receive Tw                 : 90 us

 Fallback Tw                : 90 us

 Echo Transmit Tw           : 0 us

 Echo Receive Tw            : 0 us

 Device class              : Connectivity device

 HardwareRev               : Unknown

 FirmwareRev               : Unknown

 SoftwareRev               : Unknown

 SerialNum                 : Unknown

 Manufacturer name         : Unknown

 Model name                : Unknown

 Asset tracking identifier : Unknown

 Location format       : Civic Address LCI

 Location information  :

  What(1)  Country(CN)

  CA type  CA value

  0        Chinese

  1        Zhejiang

  2        Hangzhou

 MED port information:

  Media policy type          : Unknown

  Unknown policy             : No

  VLAN tagged                : No

  Media policy VLANID        : 1000

  Media policy L2 priority   : 6

  Media policy DSCP          : 10

PoE PSE power source      : Primary

Port PSE priority         : Low

Port available power value: 2.2 w

Unknown basic TLV:

  TLV type           : 23

  TLV information    : 0x00140014

 Unknown organizationally-defined TLV:

  TLV OUI            : 00-12-bb

  TLV subtype        : 21

  Index              : 1

  TLV information    : 0x556e6b6e 6f776e

# Display the brief LLDP information that all LLDP agents on all ports received from the neighboring devices.

<Sysname> display lldp neighbor-information

LLDP neighbor-information of port 52[GigabitEthernet1/0/3]:

LLDP agent nearest-bridge:

 LLDP neighbor index : 3

 LLDP mac type       : Nearest Bridge

 ChassisID/subtype   : 0011-2233-4400/MAC address

 PortID/subtype      : 000c-29f5-c71f/MAC address

 Capabilities        : Bridge, Router, Customer Bridge

 

 LLDP neighbor index : 6

 LLDP mac type       : Nearest Bridge

 ChassisID/subtype   : 0011-2233-4400/MAC address

 PortID/subtype      : 000c-29f5-c715/MAC address

 Capabilities        : None

 

LLDP neighbor-information of port 52[GigabitEthernet1/0/3]:

LLDP agent nearest-nontpmr:

 LLDP neighbor index : 6

 ChassisID/subtype   : 0011-2233-4400/MAC address

 PortID/subtype      : 000c-29f5-c715/MAC address

 Capabilities        : None

# Display the brief LLDP information that all LLDP agents received from all neighboring devices in a list.

<Sysname> display lldp neighbor-information list

Chassis ID : * -- --Nearest nontpmr bridge neighbor

             # -- --Nearest customer bridge neighbor

             Default -- -- Nearest bridge neighbor

System Name          Local Interface   Chassis ID       Port ID

System1              GE1/0/1           000f-e25d-ee91   GigabitEthernet1/0/5

System2              GE1/0/2           000f-e25d-ee92*  GigabitEthernet1/0/6

System3              GE1/0/3           000f-e25d-ee93#  GigabitEthernet1/0/7

Table 2 Command output

Field

Description

 

LLDP neighbor-information of port 1

LLDP information received through port 1.

 

Update time

Time when LLDP information about a neighboring device was last updated.

 

LLDP mac type

Type of the neighbor MAC address:

·     Nearest bridge.

·     Nearest customer bridge.

·     Nearest non-TPMR bridge.

 

Chassis type

Chassis ID type:

·     Chassis component.

·     Interface alias.

·     Port component.

·     MAC address.

·     Network address (ipv4).

·     Interface name.

·     Locally assignedLocally-defined chassis type other than those listed above.

 

Chassis ID

ID that identifies the LLDP sending device, which can be a MAC address, a network address, an interface, or some other value, depending on the chassis ID type of the neighboring device.

 

Port ID type

Port ID type:

·     Interface alias.

·     Port component.

·     MAC address.

·     Network address (ipv4).

·     Interface name.

·     Agent circuit ID.

·     Locally assignedLocally-defined port ID type other than those listed above.

 

Port ID

Value of the type of the port ID.

 

System name

System name of the neighboring device.

 

System description

System description of the neighboring device.

 

System capabilities supported

Capabilities supported on the neighboring device:

·     Repeater—Signal repeating is supported.

·     Bridge—Switching is supported.

·     WlanAccessPointThe neighboring device can act as a wireless AP.

·     Router—Routing is supported.

·     TelephoneThe neighboring device can act as a telephone.

·     DocsisCableDeviceThe neighboring device can act as a DOCSIS-compliant cable device.

·     StationOnlyThe neighboring device can act as a station only.

·     Customer BridgeThe customer bridge feature is enabled.

·     Service BridgeThe service bridge feature is enabled.

·     TPMRThe TPMR feature is enabled.

·     OtherFeatures other than those listed above are supported.

 

System capabilities enabled

Capabilities enabled on the neighboring device:

·     Repeater—Signal repeating is enabled.

·     Bridge—Switching is enabled.

·     WlanAccessPointThe neighboring device is acting as a wireless AP.

·     Router—Routing is enabled.

·     TelephoneThe neighboring device is acting as a telephone.

·     DocsisCableDeviceThe neighboring device is acting as a DOCSIS-compliant cable device.

·     StationOnlyThe neighboring device is acting as a station only.

·     Customer BridgeThe customer bridge feature is enabled.

·     Service BridgeThe service bridge feature is enabled.

·     TPMRThe TPMR feature is enabled.

·     OtherFeatures other than those listed above are supported.

 

Management address OID

Management address object ID.

 

Port and protocol VLAN ID(PPVID)

Port protocol VLAN ID.

 

Port and protocol VLAN supported

Indicates whether protocol VLAN is supported on the port.

 

Port and protocol VLAN enabled

Indicates whether protocol VLAN is enabled on the port.

 

VLAN name of VLAN 12

Name of VLAN 12.

 

Auto-negotiation supported

Indicates whether autonegotiation is supported on the port.

 

Auto-negotiation enabled

Indicates whether autonegotiation is enabled on the port.

 

OperMau

Speed and duplex state on the port.

 

Power port class

PoE port class:

·     PSE—Power sourcing equipment.

·     PD—Powered device.

 

PSE power supported

Indicates whether the device can operate as a PSE.

 

PSE power enabled

Indicates whether the device is operating as a PSE.

 

PSE pairs control ability

Indicates whether the pair selection ability is available.

 

Power pairs

Power supply mode:

·     SignalUses data pairs to supply power.

·     SpareUses spare pairs to supply power.

 

Port power classification

Power class of the PD:

·     Class 0.

·     Class 1.

·     Class 2.

·     Class 3.

·     Class 4.

 

Power type

Power supply type:

·     Type 1 PD.

·     Type 2 PD.

·     Type 1 PSE.

·     Type 2 PSE.

Power source

Power source:

·     When the power supply type is PSE, options are:

¡     Unknown—Unknown power supply.

¡     Primary—Primary power supply.

¡     Backup—Backup power supply.

¡     Reserved.

·     When the power supply type is PD, options are::

¡     Unknown—Unknown power supply.

¡     PSE—PSE power supply.

¡     LocalLocal power supply.

¡     PSE and local—PSE and local power supplies.

Power priority

·     Unknown.

·     Critical.

·     High.

·     Low.

PD requested power value

PD requested power in watts.

PSE allocated power value

PSE allocated power in watts.

Link aggregation supported

Indicates whether link aggregation is supported.

 

Link aggregation enabled

Indicates whether link aggregation is enabled.

 

Device class

MED device class:

·     Connectivity device—Network device.

·     Class I—Normal terminal device.
It requires the basic LLDP discovery services.

·     Class II—Media terminal device.
It supports media streams, and can also act as a normal terminal device.

·     Class III—Communication terminal device.
It supports the IP communication systems of end users, and can also act as a normal terminal device or media terminal device.

 

Media policy type

Media policy type:

·     unknown.

·     voice.

·     voiceSignaling.

·     guestVoice.

·     guestVoiceSignaling.

·     softPhoneVoice.

·     videoconferencing.

·     streamingVideo.

·     videoSignaling.

 

Unknown policy

Indicates whether the media policy is unknown.

 

VLAN tagged

Indicates whether packets of the media VLAN are tagged.

 

Media policy VLAN ID

ID of the media VLAN.

 

Media policy L2 priority

Layer 2 priority.

 

Media policy DSCP

DSCP value.

 

Location format

Location information format:

·     Invalid—The location information is invalid.

·     Coordinate-based LCI—The location information is coordinate-based.

·     Civic Address LCI—Typical address information.

·     ECS ELIN—Telephone for urgencies.

 

PoE PSE power source

PSE power source type:

·     Unknown—Unknown power supply.

·     Primary—Primary power supply.

·     Backup—Backup power supply.

 

PoE PD power source

PD power source type:

·     Unknown—Unknown power supply.

·     PSE—PSE power supply.

·     Local—Local power supply.

·     PSE and local—PSE and local power supplies.

 

Port PSE priority

PoE power supply priority of PSE ports:

·     Unknown.

·     Critical.

·     High.

·     Low.

 

Port PD priority

PoE power receiving priority of PD ports:

·     Unknown.

·     Critical.

·     High.

·     Low.

 

Port available power value

Available PoE power on PSE ports, or power needed on PD ports, in watts.

 

HardwareRev

Hardware version.

 

FirmwareRev

Firmware version.

 

SoftwareRev

Software version.

 

SerialNum

Serial number.

 

Manufacturer name

Device manufacturer.

 

Model name

Device model.

 

TLV type

Unknown basic TLV type.

 

TLV information

Information contained in the unknown basic TLV type.

 

Unknown organizationally-defined TLV

Unknown organizationally specific TLV.

 

TLV OUI

OUI of the unknown organizationally specific TLV.

 

TLV subtype

Unknown organizationally specific TLV subtype.

 

Index

Unknown organization index.

 

Capabilities

Capabilities enabled on the neighboring device:

·     Repeater—Signal repeating is enabled.

·     Bridge—Switching is enabled.

·     WlanAccessPointThe neighboring device is acting as a wireless AP.

·     Router—Routing is enabled.

·     TelephoneThe neighboring device is acting as a telephone.

·     DocsisCableDeviceThe neighboring device is acting as a DOCSIS-compliant cable device.

·     StationOnlyThe neighboring device is acting as a station only.

·     OtherFeatures other than those listed above are supported.

·     NoneThe neighboring device does not advertise this TLV.

 

Local Interface

Local port that receives the LLDP information.

 

Chassis ID : * -- -- Nearest nontpmr bridge neighbor                              

                    #-- -- Nearest customer bridge neighbor

Chassis ID flag:

·     An asterisk (*) indicates the nearest non-TPMR bridge neighbor.

·     A pound sign (#) indicates the nearest customer bridge neighbor.

 

Transmit Tw

Sleep time of the local client, in μs.

 

Receive Tw

Expected sleep time for the peer client of the local client, in μs.

 

Fallback Tw

Candidate expected sleep time for the peer client of the local client, in μs.

 

Echo Transmit Tw

Sleep time of the peer client, in μs. This field displays zero when one of the following cases occurs:

·     The local client has not received the sleep time of the peer client.

·     The sleep time of the peer client is 0 μs.

 

Echo Receive Tw

Expected sleep time for the local client of the peer client, in μs. This field displays zero when one of the following cases occurs:

·     The local client has not received the expected sleep time of the peer client.

·     The expected sleep time of the peer client is 0 μs.

 

 

display lldp statistics

Use display lldp statistics to display the global LLDP statistics or the LLDP statistics of a port.

Syntax

display lldp statistics [ global | [ interface interface-type interface-number ] [ agent { nearest-bridge | nearest-customer | nearest-nontpmr } ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

global: Displays the global LLDP statistics.

interface interface-type interface-number: Specifies a port by its type and number.

agent: Specifies an LLDP agent type. If you do not specify an agent type, the command displays the statistics for all LLDP agents.

nearest-bridge: Specifies nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

Usage guidelines

If you do not specify any keywords or arguments, the command displays the global LLDP statistics and the LLDP statistics of all ports.

Examples

# Display the global LLDP statistics and the LLDP statistics of all ports.

<Sysname> display lldp statistics

LLDP statistics global information:

LLDP neighbor information last change time:0 days, 0 hours, 4 minutes, 40 seconds

The number of LLDP neighbor information inserted : 1

The number of LLDP neighbor information deleted  : 1

The number of LLDP neighbor information dropped  : 0

The number of LLDP neighbor information aged out : 1

 

LLDP statistics information of port 1 [GigabitEthernet1/0/1]:

LLDP agent nearest-bridge:

The number of LLDP frames transmitted            : 0

The number of LLDP frames received               : 0

The number of LLDP frames discarded              : 0

The number of LLDP error frames                  : 0

The number of LLDP TLVs discarded                : 0

The number of LLDP TLVs unrecognized             : 0

The number of LLDP neighbor information aged out : 0

The number of CDP frames transmitted             : 0

The number of CDP frames received                : 0

The number of CDP frames discarded               : 0

The number of CDP error frames                   : 0

 

LLDP agent nearest-nontpmr:

The number of LLDP frames transmitted            : 0

The number of LLDP frames received               : 0

The number of LLDP frames discarded              : 0

The number of LLDP error frames                  : 0

The number of LLDP TLVs discarded                : 0

The number of LLDP TLVs unrecognized             : 0

The number of LLDP neighbor information aged out : 0

The number of CDP frames transmitted             : 0

The number of CDP frames received                : 0

The number of CDP frames discarded               : 0

The number of CDP error frames                   : 0

 

LLDP agent nearest-customer:

The number of LLDP frames transmitted            : 0

The number of LLDP frames received               : 0

The number of LLDP frames discarded              : 0

The number of LLDP error frames                  : 0

The number of LLDP TLVs discarded                : 0

The number of LLDP TLVs unrecognized             : 0

The number of LLDP neighbor information aged out : 0

The number of CDP frames transmitted             : 0

The number of CDP frames received                : 0

The number of CDP frames discarded               : 0

The number of CDP error frames                   : 0

# Display the LLDP statistics for the nearest customer bridge agents on GigabitEthernet 1/0/1.

<Sysname> display lldp statistics interface GigabitEthernet1/0/1 agent nearest-customer

LLDP statistics information of port 1 [GigabitEthernet1/0/1]:

LLDP agent nearest-customer:

The number of LLDP frames transmitted            : 0

The number of LLDP frames received               : 0

The number of LLDP frames discarded              : 0

The number of LLDP error frames                  : 0

The number of LLDP TLVs discarded                : 0

The number of LLDP TLVs unrecognized             : 0

The number of LLDP neighbor information aged out : 0

The number of CDP frames transmitted             : 0

The number of CDP frames received                : 0

The number of CDP frames discarded               : 0

The number of CDP error frames                   : 0

Table 3 Command output

Field

Description

LLDP statistics global information

Global LLDP statistics.

LLDP neighbor information last change time

Time when the neighbor information was last updated.

The number of LLDP neighbor information inserted

Number of times neighbor information was added.

The number of LLDP neighbor information deleted

Number of times neighbor information was removed.

The number of LLDP neighbor information dropped

Number of times neighbor information was dropped due to lack of available memory space.

 

display lldp status

Use display lldp status to display LLDP status.

Syntax

display lldp status [ interface interface-type interface-number ] [ agent { nearest-bridge | nearest-customer | nearest-nontpmr } ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies a port by its type and number. If you do not specify this option, the command displays the global LLDP status and the LLDP status of all ports.

agent: Specifies an LLDP agent type. If you do not specify an agent type, the command displays the status information for all LLDP agents.

nearest-bridge: Specifies nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

Examples

# Display the global LLDP status and the LLDP status of each port.

<Sysname> display lldp status

Global status of LLDP: Enable

Bridge mode of LLDP: customer-bridge

The current number of LLDP neighbors: 5

The current number of CDP neighbors: 0

LLDP neighbor information last changed time: 0 days, 0 hours, 4 minutes, 40 seconds

Transmit interval              : 30s

Fast transmit interval         : 1s

Transmit max credit            : 5

Hold multiplier                : 4

Reinit delay                   : 2s

Trap interval                  : 5s

Fast start times               : 3

 

LLDP status information of port 1 [GigabitEthernet1/0/1]:

LLDP agent  nearest-bridge:

Port status of LLDP            : Enable

Admin status                   : Tx_Rx

Trap flag                      : No

MED trap flag                  : No

Polling interval               : 0s

Number of LLDP neighbors       : 5

Number of MED neighbors        : 2

Number of CDP neighbors        : 0

Number of sent optional TLV    : 12

Number of received unknown TLV : 5

LLDP agent nearest-nontpmr:

Port status of LLDP            : Enable

Admin status                   : Tx_Rx

Trap flag                      : No

Polling interval               : 0s

Number of LLDP neighbors       : 5

Number of MED neighbors        : 2

Number of CDP neighbors        : 0

Number of sent optional TLV    : 12

Number of received unknown TLV : 5

 

LLDP agent nearest-customer:

Port status of LLDP            : Enable

Admin status                   : Tx_Rx

Trap flag                      : No

Polling interval               : 0s

Number of LLDP neighbors       : 5

Number of MED neighbors        : 2

Number of CDP neighbors        : 0

Number of sent optional TLV    : 12

Number of received unknown TLV : 5

Table 4 Command output

Field

Description

Bridge mode of LLDP

LLDP bridge mode: service-bridge or customer-bridge.

Global status of LLDP

Indicates whether LLDP is globally enabled.

LLDP neighbor information last changed time

Time when the neighbor information was last updated.

Transmit interval

LLDP frame transmission interval.

Hold multiplier

TTL multiplier.

Reinit delay

LLDP reinitialization delay.

Transmit max credit

Token bucket size for sending LLDP frames.

Trap interval

Trap transmission interval.

Fast start times

Number of LLDP frames sent each time fast LLDP frame transmission is triggered.

Port 1

LLDP status of port 1.

Port status of LLDP

Indicates whether LLDP is enabled on the port.

Admin status

LLDP operating mode of the port:

·     Tx_Rx—The port can send and receive LLDP frames.

·     Rx_Only—The port can only receive LLDP frames.

·     Tx_Only—The port can only send LLDP frames.

·     Disable—The port cannot send or receive LLDP frames.

Trap Flag

Indicates whether trapping is enabled.

Polling interval

LLDP polling interval, which is 0 when LLDP polling is disabled.

Number of neighbors

Number of LLDP neighbors connecting to the port.

Number of MED neighbors

Number of MED neighbors connecting to the port.

Number of CDP neighbors

Number of CDP neighbors connecting to the port.

Number of sent optional TLV

Number of optional TLVs contained in an LLDP frame sent through the port.

Number of received unknown TLV

Number of unknown TLVs contained in a received LLDP frame.

 

display lldp tlv-config

Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.

Syntax

display lldp tlv-config [ interface interface-type interface-number ] [ agent { nearest-bridge | nearest-customer | nearest-nontpmr } ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies a port by its type and number. If you do not specify this option, the command displays the types of advertisable optional TLVs of all ports.

agent: Specifies an LLDP agent type. If you do not specify an agent type, the command displays the types of advertisable optional LLDP TLVs for all LLDP agents.

nearest-bridge: Specifies nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

Examples

# Display the types of advertisable optional LLDP TLVs of interface GigabitEthernet 1/0/1.

<Sysname> display lldp tlv-config interface gigabitethernet 1/0/1

LLDP tlv-config of port 1[GigabitEthernet1/0/1]:

LLDP agent nearest-bridge:

NAME                              STATUS    DEFAULT

Basic optional TLV:

 Port Description TLV             YES       YES

 System Name TLV                  YES       YES

 System Description TLV           YES       YES

 System Capabilities TLV          YES       YES

 Management Address TLV           YES       YES

IEEE 802.1 extend TLV:

 Port VLAN ID TLV                 YES       YES

 Port And Protocol VLAN ID TLV    NO        NO

 VLAN Name TLV                    NO        NO

 DCBX TLV                         NO        NO

 EVB TLV                          NO        NO

 Link Aggregation TLV             YES       YES

 Management VID TLV               NO        NO

 Congestion notification TLV      NO        NO

IEEE 802.3 extend TLV:

 MAC-Physic TLV                   YES       YES

 Power via MDI TLV                YES       YES

 Maximum Frame Size TLV           YES       YES

LLDP-MED extend TLV:

 Capabilities TLV                 YES        YES

 Network Policy TLV               YES        YES

 Location Identification TLV      NO         NO

 Extended Power via MDI TLV       YES        YES

 Inventory TLV                    YES        YES

LLDP agent nearest-nontpmr:

NAME                              STATUS    DEFAULT

Basic optional TLV:

 Port Description TLV             YES       NO

 System Name TLV                  YES       NO

 System Description TLV           YES       NO

 System Capabilities TLV          YES       NO

 Management Address TLV           YES       NO

IEEE 802.1 extend TLV:

 Port VLAN ID TLV                 YES       NO

 Port And Protocol VLAN ID TLV    YES       NO

 VLAN Name TLV                    YES       NO

 DCBX TLV                         NO        NO

 EVB TLV                          YES       YES

 Link Aggregation TLV             YES       NO

 Management VID TLV               NO        NO

 Congestion notification TLV      NO        NO

IEEE 802.3 extend TLV:

 MAC-Physic TLV                   YES       NO

 Power via MDI TLV                YES       NO

 Maximum Frame Size TLV           YES       NO

LLDP-MED extend TLV:

 Capabilities TLV                 YES        NO

 Network Policy TLV               YES        NO

 Location Identification TLV      NO         NO

 Extended Power via MDI TLV       YES        NO

 Inventory TLV                    YES        NO

 

LLDP agent nearest-customer:

NAME                              STATUS    DEFAULT

Basic optional TLV:

 Port Description TLV             YES       YES

 System Name TLV                  YES       YES

 System Description TLV           YES       YES

 System Capabilities TLV          YES       YES

 Management Address TLV           YES       YES

IEEE 802.1 extend TLV:

 Port VLAN ID TLV                 YES       YES

 Port And Protocol VLAN ID TLV    NO        NO

 VLAN Name TLV                    NO        NO

 DCBX TLV                         NO        NO

 EVB TLV                          NO        NO

 Link Aggregation TLV             YES       YES

 Management VID TLV               YES       YES

 Congestion notification TLV      NO        NO

IEEE 802.3 extend TLV:

 MAC-Physic TLV                   YES       NO

 Power via MDI TLV                YES       NO

 Maximum Frame Size TLV           YES       NO

LLDP-MED extend TLV:

 Capabilities TLV                 NO         NO

 Network Policy TLV               NO         NO

 Location Identification TLV      NO         NO

 Extended Power via MDI TLV       YES        NO

 Inventory TLV                    NO        NO

Table 5 Command output

Field

Description

LLDP tlv-config of port 1

Advertisable optional TLVs of port 1.

NAME

TLV type.

STATUS

Indicates whether the type of TLV is sent through a port.

DEFAULT

Indicates whether the type of TLV is sent through a port by default.

Basic optional TLV

Basic optional TLVs:

·     Port Description TLV.

·     System Name TLV.

·     System Description TLV.

·     System Capabilities TLV.

·     Management Address TLV.

·     Congestion notification TLV.

IEEE 802.1 extended TLV

IEEE 802.1 organizationally specific TLVs:

·     Port VLAN ID TLV.

·     Port and protocol VLAN ID TLV.

·     VLAN name TLV.

·     DCBX TLV.

·     EVB TLV. (The device does not support the EVB TLV in the current software version.)

·     Management VID TLV.

IEEE 802.3 extended TLV

IEEE 802.3 organizationally specific TLVs:

·     MAC-Physic TLV.

·     Power via MDI TLV.

·     Link aggregation TLV.

·     Maximum frame size TLV.

LLDP-MED extend TLV

LLDP-MED TLVs:

·     Capabilities TLV.

·     Network Policy TLV.

·     Extended Power-via-MDI TLV.

·     Location Identification TLV.

·     Inventory TLV.

Inventory TLV

Inventory TLVs:

·     Hardware Revision TLV.

·     Firmware Revision TLV.

·     Software Revision TLV.

·     Serial Number TLV.

·     Manufacturer Name TLV.

·     Model name TLV.

·     Asset ID TLV.

 

lldp admin-status

Use lldp admin-status to set the LLDP operating mode.

Use undo lldp admin-status to restore the default.

Syntax

In Layer 2/Layer 3 Ethernet interface view or management Ethernet interface view:

lldp [ agent { nearest-customer | nearest-nontpmr } ] admin-status { disable | rx | tx | txrx }

undo lldp [ agent { nearest-customer | nearest-nontpmr } ] admin-status

In Layer 2 aggregate interface view:

lldp agent { nearest-customer | nearest-nontpmr } admin-status { disable | rx | tx | txrx }

undo lldp agent { nearest-customer | nearest-nontpmr } admin-status

Default

The nearest bridge agent operates in txrx mode, and the nearest customer bridge agent and nearest non-TPMR bridge agent operate in disable mode.

Views

Layer 2 aggregate interface view

Layer 2/Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Parameters

agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management Ethernet interface view, the command sets the operating mode for nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

disable: Specifies the Disable mode. A port in this mode cannot send or receive LLDP frames.

rx: Specifies the Rx mode. A port in this mode can only receive LLDP frames.

tx: Specifies the Tx mode. A port in this mode can only send LLDP frames.

txrx: Specifies the TxRx mode. A port in this mode can send and receive LLDP frames.

Examples

# Set the LLDP operating mode to Rx for the nearest customer bridge agents on GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] lldp agent nearest-customer admin-status rx

lldp check-change-interval

Use lldp check-change-interval to enable LLDP polling and set the polling interval.

Use undo lldp check-change-interval to restore the default.

Syntax

In Layer 2/Layer 3 Ethernet interface view or management Ethernet interface view:

lldp [ agent { nearest-customer | nearest-nontpmr } ] check-change-interval interval

undo lldp [ agent { nearest-customer | nearest-nontpmr } ] check-change-interval

In Layer 2 aggregate interface view:

lldp agent { nearest-customer | nearest-nontpmr } check-change-interval interval

undo lldp agent { nearest-customer | nearest-nontpmr } check-change-interval

Default

LLDP polling is disabled.

Views

Layer 2 aggregate interface view

Layer 2/Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Parameters

agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management Ethernet interface view, the command enables LLDP polling and sets the polling interval for nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

interval: Sets the LLDP polling interval in the range of 1 to 30 seconds.

Examples

# Enable LLDP polling and set the polling interval to 30 seconds for the nearest customer bridge agents on GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] lldp agent nearest-customer check-change-interval 30

lldp enable

Use lldp enable to enable LLDP on a port.

Use undo lldp enable to disable LLDP on a port.

Syntax

lldp enable

undo lldp enable

Default

LLDP is enabled on a port.

Views

Layer 2 aggregate interface view

Layer 2/Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Usage guidelines

LLDP takes effect on a port only when LLDP is enabled both globally and on the port.

Examples

# Disable LLDP on GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] undo lldp enable

Related commands

lldp global enable

lldp encapsulation snap

Use lldp encapsulation snap to set the encapsulation format for LLDP frames to SNAP.

Use undo lldp encapsulation to restore the default.

Syntax

In Layer 2/Layer 3 Ethernet interface view or management Ethernet interface view:

lldp [ agent { nearest-customer | nearest-nontpmr } ] encapsulation snap

undo lldp [ agent { nearest-customer | nearest-nontpmr } ] encapsulation

In Layer 2 aggregate interface view:

lldp agent { nearest-customer | nearest-nontpmr } encapsulation snap

undo lldp agent { nearest-customer | nearest-nontpmr } encapsulation

Default

The encapsulation format for LLDP frames is Ethernet II.

Views

Layer 2 aggregate interface view

Layer 2/Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Parameters

agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management Ethernet interface view, the command sets the LLDP frame encapsulation format for nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

Examples

# Set the encapsulation format for LLDP frames to SNAP on GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] lldp encapsulation snap

lldp fast-count

Use lldp fast-count to set the number of LLDP frames sent each time fast LLDP frame transmission is triggered.

Use undo lldp fast-count to restore the default.

Syntax

lldp fast-count count

undo lldp fast-count

Default

Four LLDP frames are sent each time fast LLDP frame transmission is triggered.

Views

System view

Predefined user roles

network-admin

Parameters

count: Sets the number of LLDP frames sent each time fast LLDP frame transmission is triggered. The value range is 1 to 8.

Examples

# Configure the device to send five LLDP frames each time fast LLDP frame transmission is triggered.

<Sysname> system-view

[Sysname] lldp fast-count 5

lldp global enable

Use lldp global enable to enable LLDP globally.

Use undo lldp global enable to disable LLDP globally.

Syntax

lldp global enable

undo lldp global enable

Default

LLDP is globally enabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

LLDP takes effect on a port only when LLDP is enabled both globally and on the port.

Examples

# Disable LLDP globally.

<Sysname> system-view

[Sysname] undo lldp global enable

Related commands

lldp enable

lldp hold-multiplier

Use lldp hold-multiplier to set the TTL multiplier.

Use undo lldp hold-multiplier to restore the default.

Syntax

lldp hold-multiplier value

undo lldp hold-multiplier

Default

The TTL multiplier is 4.

Views

System view

Predefined user roles

network-admin

Parameters

value: Sets the TTL multiplier in the range of 2 to 10.

Usage guidelines

The TTL TLV carried in an LLDPDU determines how long the device information carried in the LLDPDU can be saved on a recipient device.

By setting the TTL multiplier, you can set the TTL of locally sent LLDP frames. The TTL is expressed by using the following formula:

TTL = Min (65535, (TTL multiplier × LLDP frame transmission interval + 1))

As the expression shows, the TTL can be up to 65535 seconds.

Examples

# Set the TTL multiplier to 6.

<Sysname> system-view

[Sysname] lldp hold-multiplier 6

Related commands

lldp timer tx-interval

lldp ignore-pvid-inconsistency

Use lldp ignore-pvid-inconsistency to disable LLDP PVID inconsistency check.

Use undo lldp ignore-pvid-inconsistency to enable LLDP PVID inconsistency check.

Syntax

lldp ignore-pvid-inconsistency

undo lldp ignore-pvid-inconsistency

Default

LLDP PVID inconsistency check is enabled.

Views

System view

Default command level

network-admin

Usage guidelines

By default, when the system receives an LLDP packet, it compares the PVID value contained in the packet with the PVID configured on the receiving interface. If the two PVIDs do not match, a log message will be printed to notify the user.

You can disable PVID inconsistency check if different PVIDs are required on a link.

Examples

# Disable LLDP PVID inconsistency check.

<Sysname> system-view

[Sysname] lldp ignore-pvid-inconsistency

lldp management-address-format string

Use lldp management-address-format string to set the encoding format of the management address to string.

Use undo lldp management-address-format to restore the default.

Syntax

In Layer 2/Layer 3 Ethernet interface view or management Ethernet interface view:

lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format string

undo lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format

In Layer 2 aggregate interface view:

lldp agent { nearest-customer | nearest-nontpmr } management-address-format string

undo lldp agent { nearest-customer | nearest-nontpmr } management-address-format

Default

The encoding format of the management address is numeric.

Views

Layer 2 aggregate interface view

Layer 2/Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Parameters

agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management Ethernet interface view, the command sets the encoding format of the management address for nearest bridge agents.

nearest-bridge: Specifies nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

Usage guidelines

LLDP neighbors must use the same encoding format for the management address.

Examples

# Set the encoding format of the management address to string for the nearest customer bridge agents on GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] lldp agent nearest-customer management-address-format string

lldp max-credit

Use lldp max-credit to set the token bucket size for sending LLDP frames.

Use undo lldp max-credit to restore the default.

Syntax

lldp max-credit credit-value

undo lldp max-credit

Default

The token bucket size for sending LLDP frames is 5.

Views

System view

Predefined user roles

network-admin

Parameters

credit-value: Specifies the token bucket size for sending LLDP frames, in the range of 1 to 100.

Examples

# Set the token bucket size for sending LLDP frames to 10.

<Sysname> system-view

[Sysname] lldp max-credit 10

lldp mode

Use lldp mode to configure LLDP to operate in service bridge mode.

Use undo lldp mode to restore the default.

Syntax

lldp mode service-bridge

undo lldp mode

Default

LLDP operates in customer bridge mode.

Views

System view

Predefined user roles

network-admin

Parameters

service-bridge: Specifies the service bridge mode.

Usage guidelines

The LLDP agent types supported by LLDP depend on the LLDP bridge mode:

·     Service bridge mode—LLDP supports nearest bridge agents and nearest non-TPMR bridge agents. LLDP processes the LLDP frames with destination MAC addresses for these agents and transparently transmits the LLDP frames with other destination MAC addresses in the VLAN.

·     Customer bridge mode—LLDP supports nearest bridge agents, nearest non-TPMR bridge agents, and nearest customer bridge agents. LLDP processes the LLDP frames with destination MAC addresses for these agents and transparently transmits the LLDP frames with other destination MAC addresses in the VLAN.

The bridge mode configuration takes effect only when LLDP is enabled globally. If LLDP is disabled globally, LLDP can only operate in customer bridge mode.

Examples

# Configure LLDP to operate in service bridge mode.

<Sysname> system-view

[Sysname] lldp mode service-bridge

Related commands

lldp global enable

lldp notification med-topology-change enable

Use lldp notification med-topology-change enable to enable LLDP-MED trapping.

Use undo lldp notification med-topology-change enable to disable LLDP-MED trapping.

Syntax

lldp notification med-topology-change enable

undo lldp notification med-topology-change enable

Default

LLDP-MED trapping is disabled on ports.

Views

Layer 2 Ethernet interface view

Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Examples

# Enable LLDP-MED trapping for GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] lldp notification med-topology-change enable

lldp notification remote-change enable

Use lldp notification remote-change enable to enable LLDP trapping.

Use undo lldp notification remote-change enable to disable LLDP trapping.

Syntax

In Layer 2/Layer 3 Ethernet interface view or management Ethernet interface view:

lldp [ agent { nearest-customer | nearest-nontpmr } ] notification remote-change enable

undo lldp [ agent { nearest-customer | nearest-nontpmr } ] notification remote-change enable

In Layer 2 aggregate interface view:

lldp agent { nearest-customer | nearest-nontpmr } notification remote-change enable

undo lldp agent { nearest-customer | nearest-nontpmr } notification remote-change enable

Default

LLDP trapping is disabled on ports.

Views

Layer 2 aggregate interface view

Layer 2/Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Parameters

agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management Ethernet interface view, the command enables LLDP trapping for nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

Examples

# Enable LLDP trapping for the nearest customer bridge agents on GigabitEthernet 1/0/1.

<Sysname> system-view

[Sysname] interface GigabitEthernet 1/0/1

[Sysname-GigabitEthernet1/0/1] lldp agent nearest-customer notification remote-change enable

lldp timer fast-interval

Use lldp timer fast-interval to set an interval for fast LLDP frame transmission.

Use undo lldp timer fast-interval to restore the default.

Syntax

lldp timer fast-interval interval

undo lldp timer fast-interval

Default

The interval for fast LLDP frame transmission is 1 second.

Views

System view

Predefined user roles

network-admin

Parameters

interval: Sets an interval for fast LLDP frame transmission, in the range of 1 to 3600 seconds.

Examples

# Set the interval for fast LLDP frame transmission to 2 seconds.

<Sysname> system-view

[Sysname] lldp timer fast-interval 2

lldp timer notification-interval

Use lldp timer notification-interval to set the LLDP trap and LLDP-MED trap transmission interval.

Use undo lldp timer notification-interval to restore the default.

Syntax

lldp timer notification-interval interval

undo lldp timer notification-interval

Default

The LLDP trap and LLDP-MED trap transmission interval is 30 seconds.

Views

System view

Predefined user roles

network-admin

Parameters

interval: Sets the LLDP trap and LLDP-MED trap transmission interval in the range of 5 to 3600 seconds.

Examples

# Set both the LLDP trap and LLDP-MED trap transmission interval to 8 seconds.

<Sysname> system-view

[Sysname] lldp timer notification-interval 8

lldp timer reinit-delay

Use lldp timer reinit-delay to set the LLDP reinitialization delay.

Use undo lldp timer reinit-delay to restore the default.

Syntax

lldp timer reinit-delay delay

undo lldp timer reinit-delay

Default

The LLDP reinitialization delay is 2 seconds.

Views

System view

Predefined user roles

network-admin

Parameters

delay: Sets the LLDP reinitialization delay in the range of 1 to 10 seconds.

Examples

# Set the LLDP reinitialization delay to 4 seconds.

<Sysname> system-view

[Sysname] lldp timer reinit-delay 4

lldp timer tx-interval

Use lldp timer tx-interval to set the LLDP frame transmission interval.

Use undo lldp timer tx-interval to restore the default.

Syntax

lldp timer tx-interval interval

undo lldp timer tx-interval

Default

The LLDP frame transmission interval is 30 seconds.

Views

System view

Predefined user roles

network-admin

Parameters

interval: Sets the LLDP frame transmission interval in the range of 5 to 32768 seconds.

Examples

# Set the LLDP frame transmission interval to 20 seconds.

<Sysname> system-view

[Sysname] lldp timer tx-interval 20

lldp tlv-enable

Use lldp tlv-enable to configure the types of advertisable TLVs.

Use undo lldp tlv-enable to disable the advertising of the specified types of TLVs.

Syntax

In Layer 2 Ethernet interface view:

·     For nearest bridge agents:

lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | congestion-notification | port-vlan-id | link-aggregation | dcbx | protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] | management-vid [ mvlan-id ] } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | network-policy [ vlan-id ] | power-over-ethernet | location-id { civic-address device-type country-code { ca-type ca-value }&<1-10> | elin-address tel-number } } }

undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | congestion-notification | port-vlan-id | link-aggregation | dcbx | protocol-vlan-id | vlan-name | management-vid } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | network-policy [ vlan-id ] | power-over-ethernet | location-id } }

·     For nearest non-TPMR bridge agents:

lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | congestion-notification | port-vlan-id | link-aggregation } }

undo lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | congestion-notification | port-vlan-id | link-aggregation } }

·     For nearest customer bridge agents:

lldp agent nearest-customer tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | congestion-notification | port-vlan-id | link-aggregation } }

undo lldp agent nearest-customer tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | congestion-notification | port-vlan-id | link-aggregation } }

In Layer 3 Ethernet interface view:

·     lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address | interface loopback interface-number ] } | dot1-tlv { all | link-aggregation } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | power-over-ethernet | location-id { civic-address device-type country-code { ca-type ca-value }&<1-10> | elin-address tel-number } } }

·     lldp agent { nearest-nontpmr | nearest-customer } tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | link-aggregation } }

·     undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address | interface loopback interface-number ] } | dot1-tlv { all | link-aggregation } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | power-over-ethernet | location-id } }

·     undo lldp agent { nearest-nontpmr | nearest-customer } tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | link-aggregation } }

In management Ethernet interface view:

·     lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | link-aggregation } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | power-over-ethernet | location-id { civic-address device-type country-code { ca-type ca-value }&<1-10> | elin-address tel-number } } }

·     lldp agent { nearest-nontpmr | nearest-customer } tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | link-aggregation } }

·     undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | link-aggregation } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | power-over-ethernet | location-id } }

·     undo lldp agent { nearest-nontpmr | nearest-customer } tlv-enable { basic-tlv { all | port-description | system-capability | system-description | system-name | management-address-tlv [ ipv6 ] [ ip-address ] } | dot1-tlv { all | link-aggregation } }

In Layer 2 aggregate interface view:

·     lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | management-address-tlv [ ipv6 ] [ ip-address ] | port-description | system-capability | system-description | system-name } | dot1-tlv { all | port-vlan-id } }

·     lldp agent nearest-customer tlv-enable { basic-tlv { all | management-address-tlv [ ipv6 ] [ ip-address ] | port-description | system-capability | system-description | system-name } | dot1-tlv { all | port-vlan-id } }

·     lldp tlv-enable dot1-tlv { protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] | management-vid [ mvlan-id ] }

·     undo lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | management-address-tlv [ ipv6 ] [ ip-address ] | port-description | system-capability | system-description | system-name } | dot1-tlv { all | port-vlan-id } }

·     undo lldp agent nearest-customer tlv-enable { basic-tlv { all | management-address-tlv [ ipv6 ] [ ip-address ] | port-description | system-capability | system-description | system-name } | dot1-tlv { all | port-vlan-id } }

·     undo lldp tlv-enable dot1-tlv { protocol-vlan-id | vlan-name | management-vid }

Default

On Layer 2 Ethernet interfaces:

·     Nearest bridge agents can advertise all types of LLDP TLVs except the following types:

¡     DCBX TLVs.

¡     Location identification TLVs.

¡     Port and protocol VLAN ID TLVs.

¡     VLAN name TLVs.

¡     Management VLAN ID TLVs.

¡     Energy-Efficient Ethernet TLVs.

·     Nearest customer bridge agents can advertise basic TLVs and IEEE 802.1 organizationally specific TLVs.

On Layer 3 Ethernet interfaces or management Ethernet interfaces:

·     Nearest bridge agents can advertise all types of LLDP TLVs (only link aggregation TLV is supported in 802.1 organizationally specific TLVs) except network policy TLVs and Energy-Efficient Ethernet TLVs.

·     Nearest non-TPMR bridge agents do not advertise TLVs.

·     Nearest customer bridge agents can advertise basic TLVs and IEEE 802.1 organizationally specific TLVs (only link aggregation TLV is supported).

On Layer 2 aggregate interfaces:

·     No nearest bridge agent exists.

·     Nearest customer bridge agents can advertise basic TLVs and IEEE 802.1 organizationally specific TLVs. Among the IEEE 802.1 organizationally specific TLVs, only port and protocol VLAN ID TLVs, VLAN name TLVs, and management VLAN ID TLVs are supported.

Views

Layer 2 aggregate interface view

Layer 2/Layer 3 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Parameters

agent: Specifies an LLDP agent type. If you do not specify an agent type in Ethernet or management Ethernet interface view, the command configures the types of advertisable TLVs for nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

all: Advertises all TLVs of the specified type.

·     Enables the interface to advertise the following TLVs:

¡     All basic LLDP TLVs if the all keyword is specified for basic-tlv.

¡     All IEEE 802.1 organizationally specific LLDP TLVs if the all keyword is specified for dot1-tlv.

¡     All IEEE 802.3 organizationally specific LLDP TLVs if the all keyword is specified for dot3-tlv.

·     Enables the interface to advertise all LLDP-MED TLVs except location identification TLVs if the all keyword is specified for med-tlv.

basic-tlv: Advertises basic LLDP TLVs.

management-address-tlv [ ipv6 ] [ ip-address | interface loopback interface-number ]: Advertises management address TLVs. The ipv6 keyword indicates that the management address to be advertised is in IPv6 format. If you do not specify this keyword, the management address in IPv4 format will be advertised. The ip-address argument specifies the management address to be advertised. The interface loopback interface-number option specifies the management address as the IP address of a loopback interface specified by its number. By default, the following rules apply:

·     When you execute the lldp tlv-enable command:

¡     For a Layer 2 Ethernet or aggregate interface, the management address is the primary IPv4/IPv6 address of the VLAN interface meeting the following requirements:

-     In up state.

-     The corresponding VLAN ID is the lowest among the VLANs permitted on the port.

If you specify the ipv6 keyword, the management address is the primary IPv6 address. If you do not specify the ipv6 keyword, the management address is the primary IPv4 address.

If none of the VLAN interfaces of the permitted VLANs is assigned an IP address or all VLAN interfaces are down, the MAC address of the port will be advertised.

¡     For a Layer 3 Ethernet interface, the IPv4/IPv6 address of the port will be advertised when the following conditions exist:

-     The ip-address argument is not configured.

-     The specified loopback interface does not have an IPv4/IPv6 address, or the specified loopback interface does not exist.

If you specify the ipv6 keyword, the management address is the IPv6 address. If you do not specify the ipv6 keyword, the management address is the IPv4 address.

If the port does not have an IP address, the MAC address of the port will be advertised.

¡     For a management Ethernet interface, the IPv4/IPv6 address of the port will be advertised when the ip-address argument is not configured.

If you specify the ipv6 keyword, the management address is the IPv6 address. If you do not specify the ipv6 keyword, the management address is the IPv4 address.

If the port does not have an IP address, the MAC address of the port will be advertised.

·     When you execute the undo lldp tlv-enable command for a Layer 2/Layer 3 Ethernet interface, management Ethernet interface, or Layer 2 aggregate interface:

¡     If you do not specify ipv6, ip-address, and interface loopback interface-number, the port does not advertise any management address TLVs.

¡     If you specify ipv6, ip-address, or interface loopback interface-number, the port advertises the default management address TLVs.

port-description: Advertises port description TLVs.

system-capability: Advertises system capabilities TLVs.

system-description: Advertises system description TLVs.

system-name: Advertises system name TLVs.

dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.

congestion-notification: Advertises QCN TLVs. Only the nearest bridge LLDP interfaces can advertise QCN TLVs.

The following matrix shows the keyword and hardware compatibility:

 

Hardware series

Model

Keyword compatibility

WX1800H series

WX1804H

WX1810H

WX1820H

No

WX2500H series

WX2510H

WX2540H

WX2560H

No

WX3000H series

WX3010H

WX3010H-L

WX3010H-X

WX3024H

WX3024H-L

Yes

WX3500H series

WX3508H

WX3510H

WX3520H

WX3540H

Yes

WX5500E series

WX5510E

WX5540E

Yes

WX5500H series

WX5540H

WX5560H

WX5580H

Yes

Access controller modules

EWPXM1MAC0F

EWPXM1WCME0

EWPXM2WCMD0F

LSQM1WCMX20

LSQM1WCMX40

LSUM1WCME0

LSUM1WCMX20RT

LSUM1WCMX40RT

Yes

 

dcbx: Advertises DCBX TLVs.

The following matrix shows the keyword and hardware compatibility:

 

Hardware series

Model

Keyword compatibility

WX1800H series

WX1804H

WX1810H

WX1820H

No

WX2500H series

WX2510H

WX2540H

WX2560H

No

WX3000H series

WX3010H

WX3010H-L

WX3010H-X

WX3024H

WX3024H-L

Yes

WX3500H series

WX3508H

WX3510H

WX3520H

WX3540H

No

WX5500E series

WX5510E

WX5540E

No

WX5500H series

WX5540H

WX5560H

WX5580H

No

Access controller modules

EWPXM1MAC0F

EWPXM1WCME0

EWPXM2WCMD0F

LSQM1WCMX20

LSQM1WCMX40

LSUM1WCME0

LSUM1WCMX20RT

LSUM1WCMX40RT

No

 

port-vlan-id: Advertises port VLAN ID TLVs.

protocol-vlan-id [ vlan-id ]: Advertises port and protocol VLAN ID TLVs. The vlan-id argument specifies a VLAN ID in the TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the default is the lowest VLAN ID on the port.

vlan-name [ vlan-id ]: Advertises VLAN name TLVs. The vlan-id argument specifies a VLAN ID in the TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the default is the lowest VLAN ID on the port. If you do not specify a VLAN ID and the port is not assigned to any VLAN, the PVID of the port is advertised.

management-vid [ mvlan-id ]: Advertises management VLAN ID TLVs. The mvlan-id argument specifies a management VLAN ID in the TLVs to be advertised. The management VLAN ID is in the range of 1 to 4094. If you do not specify this option, the value 0 is advertised, which means that the LLDP agent is not configured with a management VLAN ID.

dot3-tlv: Advertises IEEE 802.3 organizationally specific LLDP TLVs.

link-aggregation: Advertises link aggregation TLVs.

mac-physic: Advertises MAC/PHY configuration/status TLVs.

max-frame-size: Advertises maximum frame size TLVs.

power: Advertises power in MDI TLVs and power stateful control TLVs.

med-tlv: Advertises LLDP-MED TLVs.

capability: Advertises LLDP-MED capabilities TLVs.

inventory: Advertises the following TLVs: hardware revision, firmware revision, software revision, serial number, manufacturer name, model name, and asset ID.

location-id: Advertises location identification TLVs.

civic-address: Inserts the typical address information about the network device in location identification TLVs .

device-type: Sets a device type value in the range of 0 to 2:

·     Value 0 specifies a DHCP server.

·     Value 1 specifies a network device.

·     Value 2 specifies an LLDP-MED endpoint.

country-code: Sets a country code defined in ISO 3166.

{ ca-type ca-value }&<1-10>: Configures address information. ca-type represents the address information type in the range of 0 to 255. ca-value represents address information, a string of 1 to 250 characters. &<1-10> indicates that you can specify up to 10 ca-type ca-value pairs.

elin-address: Inserts telephone numbers for emergencies in location identification TLVs.

tel-number: Sets the telephone number for emergencies, a string of 10 to 25 characters.

network-policy [ vlan-id ]: Advertises network policy TLVs. vlan-id specifies the voice VLAN ID to be advertised, in the range of 1 to 4094.

power-over-ethernet: Advertises extended power-via-MDI TLVs.

Usage guidelines

Nearest bridge agents are not supported on aggregate interfaces.

You can enable the device to advertise multiple types of TLVs by using this command without the all keyword specified.

If the MAC/PHY configuration/status TLV is not advertisable, none of the LLDP-MED TLVs will be advertised whether or not they are advertisable. If the LLDP-MED capabilities TLV is not advertisable, the other LLDP-MED TLVs will not be advertised regardless of whether or not they are advertisable.

The port and protocol VLAN ID, VLAN name, and management VLAN ID TLVs in IEEE 802.1 organizationally specific LLDP TLVs can be configured only for nearest bridge agents. The configuration can be inherited by nearest customer bridge agents and nearest non-TPMR bridge agents.

Examples

# Enable the nearest customer bridge agents on GigabitEthernet 1/0/1 to advertise link aggregation TLVs of the IEEE 802.1 organizationally specific TLVs.

<Sysname> system-view

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] lldp agent nearest-customer tlv-enable dot1-tlv link-aggregation