01-Fundamentals

HomeSupportResource CenterH3C Access Controllers Command References(E5208P03 E5215P01 R5215P01)-6W10201-Fundamentals
11-License management commands
Title Size Download
11-License management commands 59.14 KB

License management commands

The following matrix shows the keywords activation-file and activation-key and hardware compatibility:

 

Hardware series

Model

activation-file compatibility

activation-key compatibility

WX1800H series

WX1804H

WX1810H

WX1820H

No

No

WX2500H series

WX2510H

WX2540H

WX2560H

Yes

No

WX3000H series

WX3010H

WX3010H-L

WX3010H-X

WX3024H

WX3024H-L

Yes

No

WX3500H series

WX3508H

WX3510H

WX3520H

WX3540H

Yes

No

WX5500E series

WX5510E

WX5540E

Yes

Yes

WX5500H series

WX5540H

WX5560H

WX5580H

Yes

No

Access controller modules

EWPXM1MAC0F

Yes

No

EWPXM1WCME0

Yes

Yes

EWPXM2WCMD0F

Yes

No

LSQM1WCMX20

Yes

No

LSQM1WCMX40

Yes

No

LSUM1WCME0

Yes

Yes

LSUM1WCMX20RT

Yes

No

LSUM1WCMX40RT

Yes

No

 

The WX2500H series and WX3000H series access controllers do not support the slot keyword or the slot-number argument.

display license

Use display license to display detailed license information.

Syntax

display license [ activation-file | activation-key ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

activation-file: Displays information about activation files.

activation-key: Displays information about activation keys.

slot slot-number: Specifies the member ID of an IRF member device. If you do not specify a member device, this command displays license information for all IRF member devices.

Usage guidelines

The display license command displays detailed information about all licenses if it is used without any keywords.

After you execute this command, it takes certain time for the device to output detailed license information depending on the device load.

Examples

# Display detailed license information for each IRF member device.

<Sysname> display license

cfa0:/license/210235A1AMB1450000272015052317092592481.ak

Feature: APMGR

Product Description: Enhanced Access Controller License,128 APs,for Verticals,for V7 Registered at: 2015-05-28 16:54:24

License Type: Trial (days restricted)

Trial Time Left (days): 30

Current State: In use

Table 1 Command output

Field

Description

Feature

Feature name.

Registered at

Time when the license was installed.

License Type

License type by validity period:

·     NA—The system cannot obtain the license type.

·     Permanent—Purchased license that never expires and is always valid.

·     Days restricted—Purchased license that is valid for a period in days, for example, 30 days.

·     Trial (days restricted)—Free trial license that is valid for a period in days.

Trial Time Left (days)

Remaining days of the trial period. This field is available for a trial license.

Time Left (days)

Remaining days of the license. This field is available for a purchased license.

Current State

State of the license:

·     In use—The license is being used.

·     Usable—The license is available for use. If multiple days-restricted licenses for one feature are installed, only one license is in In use state and the rest licenses are in Usable state.

·     Expired—The license has expired.

·     Uninstalled—The license has been uninstalled.

·     Unusable—The license cannot be used.

·     Invalid—The license is invalid and cannot be used.

Uninstall Key

This field is available for licenses that have been uninstalled. An Uninstall key is created after the uninstallation. The Uninstall key is required for transferring the license.

Uninstall Date

Date when the license was uninstalled. This field is available for licenses that have been uninstalled.

 

display license device-id

Use display license device-id to display device SN, checksum, and DID information.

Syntax

display license device-id slot slot-number

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

Each device has a unique SN and DID. When you register a license for a device, you must provide its SN and DID.

The DID changes each time you use the license compress command to compress the license storage. Use the display license device-id command to identify the up-to-date DID each time you register licenses.

The DID is generated as an .id file. Upload the file when you register the license with the license center.

Examples

# Display the device SN and DID.

<Sysname> display license device-id

SN: 210235A0VSB011000029

SN CHECK_SUM: FFFFFFEA

Device ID: cfa0:/license/210235A0VSB011000029.did

display license feature

Use display license feature to display brief license information for features.

Syntax

display license feature

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

Feature license information includes the following information:

·     The total number of licenses that the device supports.

·     The number of installed licenses.

·     Features that must be licensed to run on the device.

Examples

# Display brief feature license information.

<Sysname> display license feature

Total: 128  Usage: 2

Feature                         Licensed        State

APMGR                           Y               Trial

Table 2 Command output

Field

Description

Total

Total number of licenses that can be installed.

Usage

Number of installed licenses.

Feature

Feature that must be licensed before being used.

Licensed

Licensing state of the feature:

·     N—Not licensed.

·     Y—Licensed.

State

License type by purchasing state:

·     Trial—Trial license.

·     Formal—Purchased license.

If the feature is not licensed, this field displays a hyphen (-). To use the feature, you must install a valid license file.

 

license activation-file install

Use license activation-file install to install a license activation file.

Syntax

license activation-file install file-name slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters. The activation file must be valid and stored on the device.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

To install a license activation file successfully, make sure the SN and DID used for registering the feature license matches the current SN and DID of the device.

Activation files are device locked rather than MPU locked. A licensed feature can run on the entire system even after an MPU replacement.

Examples

# Install the activation file 20130812.ak on the device.

<Sysname> system-view

[Sysname] license activation-file install flash:/license/20130812.ak

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Related commands

·     display license activation-file

·     display license device-id

·     license activation-file uninstall

license activation-file uninstall

Use license activation-file uninstall to uninstall an activation file.

Syntax

license activation-file uninstall file-name slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

A feature cannot run on the device after you uninstall all its activation files.

Use this command to revoke an unexpired license if you want to transfer the license from one device to another.

When an activation file is uninstalled, the system creates an Uninstall key. Use this key together with the SN and DID of the transfer destination to register the license for the transfer destination.

Trial licenses are not transferrable. When you uninstall the activation file of a trial license, no Uninstall file is created.

Examples

# Uninstall the activation file flash:/license/20130812.ak from the device.

<Sysname> system-view

[Sysname] license activation-file uninstall flash:/license/20130812.ak

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Uninstall file: flash:/license/20130812.uak

Related commands

·     display license activation-file

·     license activation-file install

license activation-key install

Use license activation-key install to install an activation key.

Syntax

license activation-key install activation-key-string slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

activation-key-string: Specifies the activation key in the XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX format. The string is case sensitive and must be valid.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

To install a license activation key successfully, make sure the SN and DID used for registering the feature license matches the current SN and DID of the device.

Activation keys are device locked rather than MPU locked. A licensed feature can run on the entire system even after an MPU replacement.

Examples

# Install the activation key XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX.

<Sysname> system-view

[Sysname] license activation-key install XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Related commands

·     display license activation-key

·     display license device-id

·     license activation-key uninstall

license compress

Use license compress to compress the license storage.

Syntax

license compress slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

CAUTION

CAUTION:

The DID changes each time the license storage is compressed. Before performing a compression, make sure all activation files generated based on the old DID have been installed. They cannot be installed after the compression.

 

Use this command if the free license storage (see the display license feature command) is not sufficient.

This command clears invalid licenses (expired licenses and uninstalled licenses) and Uninstall keys from the license storage area. Back up the Uninstall keys before you compress the license storage.

Examples

# Compress the license storage on the device.

<Sysname> system-view

[Sysname] license compress

This command will delete all data relevant to uninstalled and expired keys/licenses, including Uninstall keys, and create a new device ID for activation keys/files. Make sure you have saved the Uninstall keys so you can apply for a new activation key/file for the unexpired licenses that were covered by the uninstalled activation keys/files.

Are you sure you want to continue? [Y/N]: Y

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...