09-Security Command Reference

HomeSupportResource CenterH3C S6850 & S9850 Switch Series Command References-Release 655x-6W10009-Security Command Reference
20-uRPF commands
Title Size Download
20-uRPF commands 32.02 KB

uRPF commands

display ip urpf

Use display ip urpf to display uRPF configuration.

Syntax

display ip urpf [ interface interface-type interface-number ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays uRPF configuration for all member devices.

Examples

# Display uRPF configuration for the specified slot.

<Sysname> display ip urpf slot 1

Global uRPF configuration information(failed):

   Check type: strict

# Display uRPF configuration on the specified interface.

<Sysname> display ip urpf interface vlan-interface 10 slot 1

uRPF configuration information of interface Vlan-interface10(failed):

   Check type: loose

Table 1 Command output

Field

Description

(failed)

The system failed to deliver the uRPF configuration to the forwarding chip because of insufficient chip resources.

This field is not displayed if the delivery is successful.

Check type

uRPF check mode: loose or strict.

 

ip urpf

Use ip urpf to enable uRPF.

Use undo ip urpf to disable uRPF.

Syntax

ip urpf { loose | strict }

undo ip urpf

Default

uRPF is disabled.

Views

System view

Interface view

Predefined user roles

network-admin

Parameters

loose: Enables loose uRPF check. To pass loose uRPF check, the source address of a packet must match the destination address of a FIB entry.

strict: Enables strict uRPF check. To pass strict uRPF check, the source address and receiving interface of a packet must match the destination address and output interface of a FIB entry.

Usage guidelines

uRPF can be deployed on a PE connected to a CE or an ISP, or on a CE.

Examples

# Enable strict uRPF check globally.

<Sysname> system-view

[Sysname] ip urpf strict

# Configure loose uRPF check on VLAN-interface 10.

<Sysname> system-view

[Sysname] interface vlan-interface 10

[Sysname-Vlan-interface10] ip urpf loose

Related commands

display ip urpf