00-About the H3C S9820-64H Command References

HomeSupportSwitchesS9820 SeriesReference GuidesCommand ReferencesH3C S9820-64H Switch Command References-Release 655x-6W10200-About the H3C S9820-64H Command References
Download Book
  • Released At: 13-11-2021
  • Page Views:
  • Downloads:
Table of Contents
Related Documents

About the H3C S9820-64H command references

The H3C S9820-64H command references describe the commands and command syntax options available for the H3C S9820-64H switch in the following software versions:

·     Release 6555.

·     Release 6555P01.

·     Release 6555P02 and later.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the device. This command reference includes:

·     CLI

·     RBAC

·     Logging in to the switch

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Preprovisioning

·     Device management

·     Tcl

·     Python

·     License management

Virtual Technologies Command Reference

Covers the commands for configuring the Intelligent Resilient Framework (IRF) technology features. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     Ethernet interface

·     Loopback, null, and inloopback interfaces

·     Bulk interface configuration

·     MAC address table and MAC Information

·     Ethernet link aggregation

·     DRNI

·     Port isolation

·     Spanning tree

·     Loop detection

·     VLAN (including super VLAN, private VLAN, and voice VLAN)

·     MVRP

·     QinQ

·     VLAN mapping

·     LLDP

·     L2PT

·     Service loopback group

·     Cut-through Layer 2 forwarding

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP (ARP, gratuitous ARP, proxy ARP, ARP snooping, ARP fast reply, and ARP direct route advertisement)

·     IP addressing

·     DHCP

·     DNS and DDNS

·     IP forwarding basics and load sharing

·     Fast forwarding

·     Adjacency table

·     IRDP

·     IP performance optimization

·     UDP Helper

·     IPv6 basics

·     DHCPv6

·     IPv6 fast forwarding

·     Tunneling

·     GRE

·     HTTP redirect

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     Basic IP routing

·     Static routing

·     RIP

·     OSPF

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     OSPFv3

·     IPv6 policy-based routing

·     Routing policy

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD, IPv6 PIM, and MSDP). This command reference includes:

·     IGMP snooping

·     PIM snooping

·     Multicast VLAN

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     MSDP

·     MLD snooping

·     IPv6 PIM snooping

·     IPv6 multicast VLAN

·     IPv6 multicast routing and forwarding

·     MLD

·     IPv6 PIM

MPLS Command Reference

Covers the MPLS commands. This command reference includes:

·     Basic MPLS

·     Static LSP

·     LDP

·     MPLS TE

·     Static CRLSP

·     RSVP

·     Tunnel policy

·     MPLS L3VPN and IPv6 MPLS L3VPN

·     MPLS L2VPN

·     VPLS

·     MPLS OAM

·     MCE and IPv6 MCE

·     MPLS SR

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS, including commands for the following features:

¡     QoS policy

¡     Priority mapping

¡     GTS and rate limit

¡     Congestion management

¡     Congestion avoidance

¡     Aggregate CAR

¡     QPPB

¡     Control plane packet-drop logging

·     Data buffer

·     Time range

Security Command Reference

Covers security feature commands. Available security features include identity authentication, secure management, and attack protection. This command reference includes:

·     AAA

·     802.1X

·     MAC authentication

·     Portal

·     Web authentication

·     Port security

·     User profile

·     Password control

·     Keychain

·     Public key management

·     PKI

·     IPsec, IKE, and IKEv2

·     SSH

·     SSL

·     Attack detection and prevention

·     TCP attack prevention

·     IP source guard

·     ARP attack protection

·     ND attack defense

·     uRPF

·     MFF

·     Crypto engine

·     FIPS

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Ethernet OAM

·     CFD

·     DLDP

·     RRPP

·     ERPS

·     Smart Link

·     Monitor Link

·     VRRP

·     BFD

·     Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events and test network connectivity. This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging)

·     NQA

·     NTP and SNTP

·     SNMP

·     RMON

·     Event MIB

·     NETCONF

·     CWMP

·     EAA

·     Process monitoring and maintenance

·     Sampler

·     Mirroring (including port mirroring and flow mirroring)

·     NetStream

·     IPv6 NetStream

·     sFlow

·     Information center

·     GOLD

·     Packet capture

·     VCF fabric

·     PTP

Telemetry Command Reference

Covers the commands that help you configure telemetry.

This command reference includes gRPC and INT.

FCoE Command Reference

Covers the commands for configuring FCoE.

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.

VXLAN Command Reference

Covers the commands for configuring VXLAN.

EVPN Command Reference

Covers the commands for configuring EVPN.

 

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网