- Released At: 18-11-2019
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSQM1CGP24TSSC0 main processing unit with switching and routing (24 × GE fiber port and 4 × 10-GE fiber port)
1 Card identifier
The card identifier LSQM1CGP24TSSC0 is in the upper right corner of the front panel.
2 Specifications
Table 1 Card specifications
Item |
Specifications |
Flash |
2 GB |
SDRAM (DDR3) |
2 GB |
Dimensions (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
Power consumption |
28 W to 55 W |
Ports |
· 1 x console port · 1 x USB console port · 1 x 10/100/1000BASE-T network management port · 24 x SFP fiber port · 4 x SFP+ fiber port · 1 x USB port |
Transmission rate |
· Console port: £ 115200 bps (default: 9600 bps) · USB console port: ≤ 115200 bps (default: 9600 bps) · 10/100/1000BASE-T network management port: 10/100/1000 Mbps, half/full duplex · SFP fiber port: 1000 Mbps · SFP+ fiber port: 10.3125 Gbps |
Transmission medium and max transmission distance |
· Console port: 15 m (49.21 ft) over asynchronous serial cables. · USB console port: 10 m (32.81 ft) over USB A to B cables. · 10/100/1000BASE-T network management port: 100 m (328.1 ft) over Category 5 or above twisted pair cables. · SFP fiber port: see Table 3. |
Compatible device models |
S7503E-M |
Software version |
7524 and later |
|
NOTE: As a best practice, do not use a USB extender cable to connect the USB port. |
The 10/100/1000BASE-T network management port uses an RJ-45 connector.
Figure 1 RJ-45 connector
Table 2 RJ-45 GE connector pinout
Pin |
10BASE-T/100BASE-TX/1000BASE-T |
|
Signal |
Function |
|
1 |
MX_0+ |
Transmits and receives data. |
2 |
MX_0- |
Transmits and receives data. |
3 |
MX_1+ |
Transmits and receives data. |
4 |
MX_2+ |
Transmits and receives data. |
5 |
MX_2- |
Transmits and receives data. |
6 |
MX_1- |
Transmits and receives data. |
7 |
MX_3+ |
Transmits and receives data. |
8 |
MX_3- |
Transmits and receives data. |
Table 3 describes the SFP transceiver modules available for the SFP and SFP+ ports on the card.
Table 3 GE SFP transceiver modules available for the SFP and SFP+ ports
GE SFP transceiver module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
SFP-GE-T |
N/A |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
SFP-GE-T-D |
N/A |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber (MMF) |
550 m (0.34 miles) |
62.5/125 μm MMF |
275 m (0.17 miles) |
|||
SFP-GE-SX-MM850-D |
850 nm |
LC |
50/125 μm MMF |
550 m (0.34 miles) |
62.5/125 μm MMF |
275 m (0.17 miles) |
|||
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single-mode optical fiber (SMF) |
10 km (6.21 miles) |
50/125 μm MMF |
550 m (1804.46 ft) |
|||
62.5/125 μm MMF |
550 m (1804.46 ft) |
|||
SFP-GE-LX-SM1310-D |
1310 nm |
LC |
9/125 μm SMF |
10 km (6.21 miles) |
50/125 μm MMF |
550 m (1804.46 ft) |
|||
62.5/125 μm MMF |
550 m (1804.46 ft) |
|||
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm SMF |
40 km (24.86 miles) |
SFP-GE-LH40-SM1310-D |
1310 nm |
LC |
9/125 μm SMF |
40 km (24.86 miles) |
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm SMF |
40 km (24.86 miles) |
SFP-GE-LH80-SM1550 |
1550 nm |
LC |
9/125 μm SMF |
80 km (49.71 miles) |
SFP-GE-LH80-SM1550-D |
1550nm |
LC |
9/125 μm SMF |
80 km (49.71 miles) |
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm SMF |
100 km (62.14 miles) |
SFP-GE-LX-SM1310-BIDI |
RX: 1490 nm TX: 1310 nm |
LC |
9/125 μm SMF |
10 km (6.21 miles) |
SFP-GE-LX-SM1490-BIDI |
RX: 1310 nm TX: 1490 nm |
LC |
9/125 μm SMF |
10 km (6.21 miles) |
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
50/125 μm MMF |
2 km (1.24 miles) |
62.5/125 μm MMF |
275 m (0.17 miles) |
|||
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm SMF |
15 km (9.32 miles) |
SFP-FE-LX-SM1310-D |
1310 nm |
LC |
9/125 μm SMF |
15 km (9.32 miles) |
|
NOTE: · BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber. · The BIDI modules must be used in pairs. For example, if you install the SFP-GE-LX-SM1310-BIDI in the local port, you must install the SFP-GE-LX-SM1490-BIDI in the peer port. · The 10GBASE-R-SFP+ port does not support the following SFP transceiver modules: SFP-GE-T, SFP-GE-T-D, SFP-FE-SX-MM1310-A, SFP-FE-LX-SM1310-A, and SFP-FE-LX-SM1310-D. |
Table 4 describes the SFP+ transceiver modules available for the SFP+ ports on the card.
Table 4 SFP+ transceiver modules available for the SFP+ ports
SFP+ transceiver module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
SFP-XG-SX-MM850-A |
850 nm |
LC |
50/125 μm MMF |
300 m (984.25 ft) |
62.5/125 μm MMF |
33 m (108.27 ft) |
|||
SFP-XG-SX-MM850-D |
850 nm |
LC |
50/125 μm MMF |
300 m (984.25 ft) |
62.5/125 μm MMF |
33 m (108.27 ft) |
|||
SFP-XG-SX-MM850-E |
850 nm |
LC |
50/125 μm MMF |
300 m (984.25 ft) |
62.5/125 μm MMF |
33 m (108.27 ft) |
|||
SFP-XG-SX-MM850-F1 |
850 nm |
LC |
50/125 μm MMF |
300 m (984.25 ft) |
62.5/125 μm MMF |
33 m (108.27 ft) |
|||
SFP-XG-LX-SM1310 |
1310 nm |
LC |
9/125 μm SMF |
10 km (6.21 miles) |
SFP-XG-LX-SM1310-D |
1310 nm |
LC |
9/125 μm SMF |
10 km (6.21 miles) |
SFP-XG-LX-SM1310-E |
1310 nm |
LC |
9/125 μm SMF |
10 km (6.21 miles) |
SFP-XG-LH40-SM1550 |
1550 nm |
LC |
9/125 μm SMF |
40 km (24.86 miles) |
SFP-XG-LH40-SM1550-D |
1550 nm |
LC |
9/125 μm SMF |
40 km (24.86 miles) |
SFP-XG-LH80-SM1550 |
1550 nm |
LC |
9/125 μm SMF |
80 km (49.71 miles) |
SFP-XG-LH80-SM1550-D |
1550 nm |
LC |
9/125 μm SMF |
80 km (49.71 miles) |
Table 5 describes the SFP+ cables available for the SFP+ ports on the card.
Table 5 SFP+ cables available for the SFP+ ports
SFP+ cable |
Cable length |
Data rate |
Remark |
LSWM1STK |
0.65 m (2.13 ft) |
10.31 Gbps |
Use for connecting SFP+ ports |
LSWM2STK |
1.2 m (3.94 ft) |
||
LSWM3STK |
3 m (9.84 ft) |
3 Related documentation
For module installation, see H3C S7500E Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2016-2018 New H3C Technologies Co ., Ltd.
The information in this document is subject to change without notice.