H3C LSQM2GP44TSSC0 Card Manual-6PW106

HomeSupportResource CenterSwitchesH3C S7500E Switch SeriesH3C S7500E Switch SeriesTechnical DocumentsInstallCard Module ManualsH3C LSQM2GP44TSSC0 Card Manual-6PW106
Download Book
Title Size Downloads
H3C LSQM2GP44TSSC0 Card Manual-6PW106.pdf 20.44 KB
Table of Contents
Related Documents

44-port 1000BASE-X-SFP + 4-port 10GBASE-R-SFP+ optical Ethernet interface card—LSQM2GP44TSSC0

1  Card identifier

The card identifier LSQM2GP44TSSC0 is in the upper right corner of the front panel.

2  Specifications

 

IMPORTANT

IMPORTANT:

Before installing the card, you must remove the protection cover from the card to ensure correct installation.

 

Table 1 Card specifications

Item

Specifications

Card size (H × W × D)

40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)

SDRAM (DDR3)

1GB

Power consumption

31 W to 65 W

Ports

·     44 x 1000BASE-X-SFP fiber ports

·     4 x 10GBASE-R-SFP+ fiber ports

Connector type

LC

Port rate

·     1000 Mbps

·     10 Gbps

Applicable hardware platforms

·     All S7500E models

·     All S7500X models

Applicable host software versions

Release 7150 and Later

 

IMPORTANT

IMPORTANT:

For more information about transceiver modules and cables available for the card, see H3C S7500E Switch Series Cards and Transceiver Modules Compatibility Matrixes and H3C S7500X Switch Series Cards and Transceiver Modules Compatibility Matrixes.

 

3  Related documentation

For module installation, see H3C S7500E Switch Series Installation Guide and H3C S7500X Switch Series Installation Guide.

For software upgrade, see the release notes for the device.

 

Copyright © 2014-2018 New H3C Technologies Co ., Ltd.

The information in this document is subject to change without notice.